* fuzzgen: Request only one variable for bswap
This was included by accident. Bswap only has one input, instead of two.
* cranelift: Add `bswap.i128` support
Adds support only for x86, AArch64, S390X.
RISCV does not yet have bswap.
This branch removes the trapif and trapff instructions, in favor of using an explicit comparison and trapnz. This moves us closer to removing iflags and fflags, but introduces the need to implement instructions like iadd_cout in the x64 and aarch64 backends.
- Allow bitcast for vectors with differing lane widths
- Remove raw_bitcast IR instruction
- Change all users of raw_bitcast to bitcast
- Implement support for no-op bitcast cases across backends
This implements the second step of the plan outlined here:
https://github.com/bytecodealliance/wasmtime/issues/4566#issuecomment-1234819394
Adds Bswap to the Cranelift IR. Implements the Bswap instruction
in the x64 and aarch64 codegen backends. Cranelift users can now:
```
builder.ins().bswap(value)
```
to get a native byteswap instruction.
* x64: implements the 32- and 64-bit bswap instruction, following
the pattern set by similar unary instrutions (Neg and Not) - it
only operates on a dst register, but is parameterized with both
a src and dst which are expected to be the same register.
As x64 bswap instruction is only for 32- or 64-bit registers,
the 16-bit swap is implemented as a rotate left by 8.
Updated x64 RexFlags type to support emitting for single-operand
instructions like bswap
* aarch64: Bswap gets emitted as aarch64 rev16, rev32,
or rev64 instruction as appropriate.
* s390x: Bswap was already supported in backend, just had to add
a bit of plumbing
* For completeness, added bswap to the interpreter as well.
* added filetests and runtests for each ISA
* added bswap to fuzzgen, thanks to afonso360 for the code there
* 128-bit swaps are not yet implemented, that can be done later
Add a new instruction uadd_overflow_trap, which is a fused version of iadd_ifcout and trapif. Adding this instruction removes a dependency on the iflags type, and would allow us to move closer to removing it entirely.
The instruction is defined for the i32 and i64 types only, and is currently only used in the legalization of heap_addr.
As discussed in the 2022/10/19 meeting, this PR removes many of the branch and select instructions that used iflags, in favor if using brz/brnz and select in their place. Additionally, it reworks selectif_spectre_guard to take an i8 input instead of an iflags input.
For reference, the removed instructions are: br_icmp, brif, brff, trueif, trueff, and selectif.
This fixes#5086 by addressing two separate issues:
- The `ValueDataPacked::set_type()` helper had an embarrassing bitfield-manipulation bug that would mangle the rest of a `ValueDef` when setting its type. This is not normally used, only when the egraph elaboration fills in types after-the-fact on a multi-value node.
- The lowering rules for `isplit` on aarch64 and s390x were dispatching on the first output type, rather than the input type. When only the second output is used (as in the example in #5086), the first output type actually remains `INVALID` (and this is fine because it's never used).
Remove the boolean types from cranelift, and the associated instructions breduce, bextend, bconst, and bint. Standardize on using 1/0 for the return value from instructions that produce scalar boolean results, and -1/0 for boolean vector elements.
Fixes#3205
Co-authored-by: Afonso Bordado <afonso360@users.noreply.github.com>
Co-authored-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Co-authored-by: Chris Fallin <chris@cfallin.org>
* Port branches to ISLE (AArch64)
Ported the existing implementations of the following opcodes for AArch64
to ISLE:
- `Brz`
- `Brnz`
- `Brif`
- `Brff`
- `BrIcmp`
- `Jump`
- `BrTable`
Copyright (c) 2022 Arm Limited
* Remove dead code
Copyright (c) 2022 Arm Limited
Ported the existing implementations of the following opcodes for AArch64
to ISLE:
- `Trueif`
- `Trueff`
- `Trapif`
- `Trapff`
- `Select`
- `Selectif`
- `SelectifSpectreGuard`
Copyright (c) 2022 Arm Limited
Improved the instruction lowering for the following opcodes on AArch64,
and introduced support for converting to integers less than 32-bits wide
as per the docs:
- `FcvtToSintSat`
- `FcvtToUintSat`
Copyright (c) 2022 Arm Limited
* Vector bitcast support (AArch64 & Interpreter)
Implemented support for `bitcast` on vector values for AArch64 and the
interpreter.
Also corrected the verifier to ensure that the size, in bits, of the input and
output types match for a `bitcast`, per the docs.
Copyright (c) 2022 Arm Limited
* `I128` same-type bitcast support
Copyright (c) 2022 Arm Limited
* Directly return input for 64-bit GPR<=>GPR bitcast
Copyright (c) 2022 Arm Limited
* Port `icmp` to ISLE (AArch64)
Ported the existing implementation of `icmp` (and, by extension, the
`lower_icmp` function) to ISLE for AArch64.
Copyright (c) 2022 Arm Limited
* Allow 'producer chains', eliminating `Nop0`s
Copyright (c) 2022 Arm Limited
Previously the implementations of the various atomic memory IR operations
ignored the memory operation flags that were passed.
Copyright (c) 2022, Arm Limited.
Co-authored-by: Chris Fallin <chris@cfallin.org>
This PR removes all uses of modify-operands in the aarch64 backend,
replacing them with reused-input operands instead. This has the nice
effect of removing a bunch of move instructions and more clearly
representing inputs and outputs.
This PR also removes the explicit use of pinned vregs in the aarch64
backend, instead using fixed-register constraints on the operands when
insts or pseudo-inst sequences require certain registers.
This is the second PR in the regalloc-semantics cleanup series; after
the remaining backend (s390x) and the ABI code are cleaned up as well,
we'll be able to simplify the regalloc2 frontend.
Ported the existing implementation of `fcmp` for AArch64 to ISLE.
This also ports the `lower_vector_comparison` method to ISLE.
Copyright (c) 2022 Arm Limited
This retains `lower_amode` in the handwritten code (@akirilov-arm
reports that there is an upcoming patch to port this), but tweaks it
slightly to take a `Value` rather than an `Inst`.
* Port `Fcopysign`..``FcvtToSintSat` to ISLE (AArch64)
Ported the existing implementations of the following opcodes to ISLE on
AArch64:
- `Fcopysign`
- Also introduced missing support for `fcopysign` on vector values, as
per the docs.
- This introduces the vector encoding for the `SLI` machine
instruction.
- `FcvtToUint`
- `FcvtToSint`
- `FcvtFromUint`
- `FcvtFromSint`
- `FcvtToUintSat`
- `FcvtToSintSat`
Copyright (c) 2022 Arm Limited
* Document helpers and abstract conversion checks
Ported the existing implementations of the following opcodes for AArch64
to ISLE, and implemented support for 64-bit vectors (per the docs):
- `SwidenLow`
- `SwidenHigh`
- `UwidenLow`
- `UwidenHigh`
Also ported `WideningPairwiseDotProductS` as-is.
Copyright (c) 2022 Arm Limited
* Port `vconst` to ISLE (AArch64)
Ported the existing implementation of `vconst` to ISLE for AArch64, and
added support for 64-bit vector constants.
Also introduced 64-bit `vconst` support to the interpreter.
Copyright (c) 2022 Arm Limited
* Replace if-chains with match statements
Copyright (c) 2022 Arm Limited
Ported the existing implementations of the following opcodes on AArch64
to ISLE:
- `AvgRound`
- Also introduced support for `i64x2` vectors, as per the docs.
- `SqmulRoundSat`
Copyright (c) 2022 Arm Limited
Separates the following opcodes for AArch64 into a separate `VecALUModOp` enum,
which is emitted via the `VecRRRMod` instruction. This separates vector ALU
instructions which modify a register from instructions which write to a new register:
- `Bsl`
- `Fmla`
Addresses [a discussion](https://github.com/bytecodealliance/wasmtime/pull/4608#discussion_r937975581) in #4608.
Copyright (c) 2022 Arm Limited
* Convert `fma`, `valltrue` & `vanytrue` to ISLE (AArch64)
Ported the existing implementations of the following opcodes to ISLE on
AArch64:
- `fma`
- Introduced missing support for `fma` on vector values, as per the
docs.
- `valltrue`
- `vanytrue`
Also fixed `fcmp` on scalar values in the interpreter, and enabled
interpreter tests in `simd-fma.clif`.
This introduces the `FMLA` machine instruction.
Copyright (c) 2022 Arm Limited
* Add comments for `Fmla` and `Bsl`
Copyright (c) 2022 Arm Limited
* Port `Shuffle` to ISLE (AArch64)
Ported the existing implementation of `Shuffle` for AArch64 to ISLE.
Copyright (c) 2022 Arm Limited
* Cleanup by shadowing `rn`, `rn2`, and `_`
Copyright (c) 2022 Arm Limited
* Cranelift: Add instructions for getting the current stack/frame pointers and return address
This is the initial part of https://github.com/bytecodealliance/wasmtime/issues/4535
* x64: Remove `Amode::RbpOffset` and use `Amode::ImmReg` instead
We just special case getting operands from `Amode`s now.
* Fix s390x `get_return_address`; require `preserve_frame_pointers=true`
* Assert that `Amode::ImmRegRegShift` doesn't use rbp/rsp
* Handle non-allocatable registers in Amode::with_allocs
* Use "stack" instead of "r15" on s390x
* r14 is an allocatable register on s390x, so it shouldn't be used with `MovPReg`
* Cranellift: remove Baldrdash support and related features.
As noted in Mozilla's bugzilla bug 1781425 [1], the SpiderMonkey team
has recently determined that their current form of integration with
Cranelift is too hard to maintain, and they have chosen to remove it
from their codebase. If and when they decide to build updated support
for Cranelift, they will adopt different approaches to several details
of the integration.
In the meantime, after discussion with the SpiderMonkey folks, they
agree that it makes sense to remove the bits of Cranelift that exist
to support the integration ("Baldrdash"), as they will not need
them. Many of these bits are difficult-to-maintain special cases that
are not actually tested in Cranelift proper: for example, the
Baldrdash integration required Cranelift to emit function bodies
without prologues/epilogues, and instead communicate very precise
information about the expected frame size and layout, then stitched
together something post-facto. This was brittle and caused a lot of
incidental complexity ("fallthrough returns", the resulting special
logic in block-ordering); this is just one example. As another
example, one particular Baldrdash ABI variant processed stack args in
reverse order, so our ABI code had to support both traversal
orders. We had a number of other Baldrdash-specific settings as well
that did various special things.
This PR removes Baldrdash ABI support, the `fallthrough_return`
instruction, and pulls some threads to remove now-unused bits as a
result of those two, with the understanding that the SpiderMonkey folks
will build new functionality as needed in the future and we can perhaps
find cleaner abstractions to make it all work.
[1] https://bugzilla.mozilla.org/show_bug.cgi?id=1781425
* Review feedback.
* Fix (?) DWARF debug tests: add `--disable-cache` to wasmtime invocations.
The debugger tests invoke `wasmtime` from within each test case under
the control of a debugger (gdb or lldb). Some of these tests started to
inexplicably fail in CI with unrelated changes, and the failures were
only inconsistently reproducible locally. It seems to be cache related:
if we disable cached compilation on the nested `wasmtime` invocations,
the tests consistently pass.
* Review feedback.
* Cranelift: Don't `emit` inside lowering rules in aarch64
The lowering rules should be "pure" and side-effect free, using helpers defined
in `inst.isle` to perform actual side effects like emitting instructions.
* Cranelift: use 80 width for section separators in aarch64 lowering rules
Ported the existing implementation of the following Opcodes for AArch64
to ISLE:
- `Fence`
- `IsNull`
- `IsInvalid`
- `Debugtrap`
Copyright (c) 2022 Arm Limited
* cranelift: Reorganize test suite
Group some SIMD operations by instruction.
* cranelift: Deduplicate some shift tests
Also, new tests with the mod behaviour
* aarch64: Lower shifts with mod behaviour
* x64: Lower shifts with mod behaviour
* wasmtime: Don't mask SIMD shifts
* [AArch64] Port SIMD narrowing to ISLE
Fvdemote, snarrow, unarrow and uunarrow.
Also refactor the aarch64 instructions descriptions to parameterize
on ScalarSize instead of using different opcodes.
The zero_value pure constructor has been introduced and used by the
integer narrow operations and it replaces, and extends, the compare
zero patterns.
Copright (c) 2022, Arm Limited.
* use short 'if' patterns
Converted the existing implementations for the following opcodes to ISLE
on AArch64:
- `sqrt`
- `fneg`
- `fabs`
- `fpromote`
- `fdemote`
- `ceil`
- `floor`
- `trunc`
- `nearest`
Copyright (c) 2022 Arm Limited
Converted the existing implementations for the following Opcodes to ISLE on AArch64:
- `fadd`
- `fsub`
- `fmul`
- `fdiv`
- `fmin`
- `fmax`
- `fmin_pseudo`
- `fmax_pseudo`
Copyright (c) 2022 Arm Limited
* Implement `iabs` in ISLE (AArch64)
Converts the existing implementation of `iabs` for AArch64 into ISLE,
and fixes support for `iabs` on scalar values.
Copyright (c) 2022 Arm Limited.
* Improve scalar `iabs` implementation.
Also introduces `CSNeg` instruction.
Copyright (c) 2022 Arm Limited
* Convert `scalar_to_vector` to ISLE (AArch64)
Converted the exisiting implementation of `scalar_to_vector` for AArch64 to
ISLE.
Copyright (c) 2022 Arm Limited
* Add support for floats and fix FpuExtend
- Added rules to cover `f32 -> f32x4` and `f64 -> f64x2` for
`scalar_to_vector`
- Added tests for `scalar_to_vector` on floats.
- Corrected an invalid instruction emitted by `FpuExtend` on 64-bit
values.
Copyright (c) 2022 Arm Limited
