* Make Handle a trait required for any WASI-compatible handle
OK, so this PR is a bit of an experiment that came about somewhat itself
when I was looking at refactoring use of `Rc<RefCell<Descriptor>>` inside
`Entry` struct. I've noticed that since we've placed `VirtualFile` on the
same level as `OsHandle` and `Stdin` etc., we've ended up necessiitating
checks for different combinations such as "is a real OS resource being mixed
up with a virtual resource?", and if that was the case, we'd panic since
this was clearly not allowed (e.g., symlinking, or worse renaming).
Therefore, it seemed natural for virtual file to be on the same level
as _any_ OS handle (regardless of whether it's an actual file, socket,
or stdio handle). In other words, we should ideally envision the following
hierarchy:
```
\-- OsHandle \-- OsFile
-- Stdio
\-- Virtual
```
This way, we can deal with the mix up at a level above which cleans up
our logic significantly.
On the other hand, when looking through the `virtfs`, the trait approach
to some type that's a valid `Handle` grew on me, and I think this
is the way to go. And this is what this PR is proposing, a trait
`Handle` which features enough functionality to make both virtual and
OS ops to work. Now, inside `Entry` we can safely store something like
`Rc<dyn Handle>` where `Handle` can downcast to either `VirtualFile` or
`VirtualDir`, or `OsHandle` if its an actual OS resource. Note that
I've left `Handle` as one massive trait, but I reckon we could split
it up into several smaller traits, each dealing with some bit of WASI
functionality. I'm hoping this would perhaps make it easier to figure
out polyfilling between snapshots and the new upcoming ephemeral
snapshot since a lot of boilerplate functionality is now done as part
of the `Handle` trait implementation.
Next, I've redone the original `OsHandle` to be an `OsFile` which
now stores a raw descriptor/handle (`RawFd`/`RawHandle`) inside a
`Cell` so that we can handle interior mutability in an easy (read,
non-panicky) way. In order not to lose the perks of derefercing to
`std::fs::File`, I've added a convenience trait `AsFile` which
will take `OsFile` by reference (or the stdio handles) and create
a non-owned `ManuallyDrop<File>` resource which can be passed around
and acted upon the way we'd normally do on `&File`. This change of
course implies that we now have to worry about properly closing all
OS resources stored as part of `OsFile`, thus this type now implements
`Drop` trait which essentially speaking moves the raw descriptor/handle
into a `File` and drops it.
Finally, I've redone setting time info on relative paths on *nix using
the same approach as advocated in the virtual fs. Namely, we do an
`openat` followed by `filestat_set_times` on the obtained descriptor.
This effectively removes the need for custom `filetime` module in
`yanix`. However, this does probably incur additional cost of at least
one additional syscall, and I haven't checked whether this approach
performs as expected on platforms such as NixOS which as far as I remember
had some weirdness todo with linking `utimensat` symbols, etc. Still,
this change is worth considering given that the implementation of
`path_filestat_set_times` cleans up a lot, albeit with some additional
cost.
* Fix tests on Windows
* Address comments plus minor consistency cleanup
* Address comments
* Fix formatting
* Wasmtime 0.15.0 and Cranelift 0.62.0. (#1398)
* Bump more ad-hoc versions.
* Add build.rs to wasi-common's Cargo.toml.
* Update the env var name in more places.
* Remove a redundant echo.
* Move back to only one WASI submodule
This commit fixes the issue where we have two WASI submodules for build
reasons in this repository. The fix was to place the submodule in the
`wasi-common` crate, and then anyone using the `wig` crate has to be
sure to define a `WASI_ROOT` env var in a build script to be able to
parse witx files.
With all that in place `wasi-common` becomes the source of truth for the
witx files we're parsing, and crates like `wasmtime-wasi` use
build-scripts shenanigans to read the same witx files. This should
hopefully get us so we're compatible with publishing and still only have
one submodule!
* rustfmt
This commit augments `wiggle` with trace log generation for the shims,
returned errno values, and returned values proper (if any, i.e.,
different than unit type `()`). What that means is that every syscall
will have auto-generated up to 3 traces, for instance,
```
TRACE wasi_common::wasi::wasi_snapshot_preview1 > fd_prestat_get(fd=Fd(3))
TRACE wasi_common::wasi::wasi_snapshot_preview1 > | result=(buf=Dir(PrestatDir { pr_name_len: 1 }))
TRACE wasi_common::wasi::wasi_snapshot_preview1 > | errno=No error occurred. System call completed successfully. (Errno::Success(0))
```
Putting logging behind a feature gate in this case means that the log calls
are generated by the `wiggle` crate regardless if the client requested
the feature or not, however, then their usage in the client lib is
dictated by the presence of the feature flag. So, for instance, `wasi-common`
has this feature enabled by default, while any other client lib
using `wiggle` if they don't want tracing enabled, they will just
leave the feature off. I'm not sure if this is what we wanted
but seemed easiest to implement quickly. Lemme y'all know your thoughts
about this!
* Refactor use of Refs and RefMuts in wasi-common
This commit refactors the use of `Ref`s and `RefMut`s in `wasi-common`.
Now, `Entry` is stored behind an `Rc` inside the `EntryTable`. The `Entry`
itself on the other hand now stores rights behind a `RefCell` and the
descriptor as `Rc<RefCell<..>>` combo to enable easy reference tracking
and interior mutability which is required down the line in a couple of
syscalls. In essence, this implies that we no longer have need for
mutable accessor to `Entry` from `WasiCtx`, and so all related methods
go away (`get_entry_mut`, etc.).
While here, I've also simplified handling and aggregating of rights on
the `Entry` object. Instead of storing base and inheriting rights as
separate fields, they are now aggregated into one struct `EntryRights`
which features convenient constructors for each possible combination; i.e.,
when only base rights are set, or both base and inheriting are set, or
both are left as empty. Since we do need to be able to mutate those
rights down the line in `fdstat_set_rights` syscall, this object
is kept behind a `RefCell` (note no `Rc` since we don't need to pass it
around anywhere).
The descriptor field in `Entry` is now kept behind `Rc<RefCell<..>>` combo
since we not only need to mutate it down the line, but we also need to
be able to pass it around (as part of the machinery making `poll_oneoff`
work).
I've also removed `as_file` and `try_clone` methods on `Descriptor` struct
since they were adding more noise than necessary, and making them work
with `Rc` was unnecessarily complicated.
Finally, I've converted the `get_dir_from_os_handle` function into a
method attached to the `OsHandle` itself, called `dir_stream`. IMHO,
it makes more sense to have it there directly as a method than as a separate
function.
* Use Cell for types that are Copy
* Bump Wasmtime to 0.14.0.
* Update the publish script for the wiggle crate wiggle.
* More fixes.
* Fix lightbeam depenency version.
* cargo update
* Cargo update wasi-tests too.
And add cargo update to the version-bump scripts.
* Publishing fixes.
* Make WASI a symlink.
* More fixes.
* Cargo doesn't allow dev-dependencies to have optional features.
* Remove the symlink.
* Add WASI as another git submodule.
* Shuffle around the wiggle crates
This commit reorganizes the wiggle crates slightly by performing the
following transforms:
* The `crates/wiggle` crate, previously named `wiggle`, was moved to
`crates/wiggle/crates/macro` and is renamed to `wiggle-macro`.
* The `crates/wiggle/crates/runtime` crate, previously named
`wiggle-runtime`, was moved to `crates/wiggle` and is renamed to
`wiggle`.
* The new `wiggle` crate depends on `wiggle-macro` and reexports the macro.
The goal here is that consumers only deal with the `wiggle` crate
itself. No more crates depend on `wiggle-runtime` and all dependencies
are entirely on just the `wiggle` crate.
* Remove the `crates/wiggle/crates` directory
Move everything into `crates/wiggle` directly, like `wasi-common`
* Add wiggle-macro to test-all script
* Fixup a test
This commit adds support for snapshot0 in the WASI C API.
A name parameter was added to `wasi_instance_new` to accept which WASI module
is being instantiated.
Additionally, the C# API now supports constructing a WASI instance based on the
WASI module name.
Fixes#1221.
* wiggle: emit a metadata module containing witx document
* wiggle: put metadata module behind a wiggle_metadata feature
* wasi-common: add wiggle_metadata feature and optional witx dep
* refactor according to alex's advice
* wasi-common: make snapshots pub
* wasi-common: i do need a wiggle_metadata feature to be available
* Tweak features and such
* wiggle: fix tests by passing metadata flag to wiggle-runtime
* wiggle: need to move wiggle-runtime to a non-dev dependency
so that the feature resolves for external users of the crates
Co-authored-by: Alex Crichton <alex@alexcrichton.com>
* Clean up the use of mutable Entry
Until now, several syscalls including `fd_pwrite` etc. were relying on
mutating `&mut Entry` by mutating its inner file handle. This is
unnecessary in almost all cases since all methods mutating `std::fs::File`
in Rust's libstd are also implemented for `&std::fs::File`.
While here, I've also modified `OsHandle` in BSD to include `RefCell<Option<Dir>>`
rather than `Option<Mutex<Dir>>` as was until now. While `RefCell`
could easily be replaced with `RefCell`, since going multithreading
will require a lot of (probably even) conceptual changes to `wasi-common`,
I thought it'd be best not to mix single- with multithreading contexts
and swap all places at once when it comes to it.
I've also had to make some modifications to virtual FS which mainly
swapped mutability for interior mutability in places.
* Use one-liners wherever convenient
* Add a `wasmtime::Linker` type
This commit adds a new type to the `wasmtime` crate, a `Linker`. This
linker is intended to vastly simplify calling `Instance::new` by easily
performing name resolution and incrementally defining state over time.
The goal here is to start down a path of making linking wasm modules in
`wasmtime` a first-class and ergonomic operation. This is highly likely
to evolve over time and get tweaked through releases as we iterate
towards a design well-suited for `wasmtime`, but this is intended to at
least be the initial foundation for such functionality.
This commit additionally also adds a C API for the linker and switches
the existing linking examples to using this linker in both Rust and C.
One piece of future work I'd like to tackle next is to integrate WASI
into the `wasmtime` crate in a more first-class manner. This [`Linker`]
type provides a great location to hook into the instantiation process to
easily instantiate modules with WASI imports. That's a relatively large
refactoring for now though and I figured it'd be best left for a
different time.
Closes#727
Some structs and unions are large enough that making them `Copy` isn't
ideal. wasi-common only needed `Copy` in a few places that were easy to
fix. `SubscriptionClock` is 32 bytes, so it's not a bad a idea to pass
it by reference anyway.
* Use wiggle in place of wig in wasi-common
This is a rather massive commit that introduces `wiggle` into the
picture. We still use `wig`'s macro in `old` snapshot and to generate
`wasmtime-wasi` glue, but everything else is now autogenerated by `wiggle`.
In summary, thanks to `wiggle`, we no longer need to worry about
serialising and deserialising to and from the guest memory, and
all guest (WASI) types are now proper idiomatic Rust types.
While we're here, in preparation for the ephemeral snapshot, I went
ahead and reorganised the internal structure of the crate. Instead of
modules like `hostcalls_impl` or `hostcalls_impl::fs`, the structure
now resembles that in ephemeral with modules like `path`, `fd`, etc.
Now, I'm not requiring we leave it like this, but I reckon it looks
cleaner this way after all.
* Fix wig to use new first-class access to caller's mem
* Ignore warning in proc_exit for the moment
* Group unsafes together in args and environ calls
* Simplify pwrite; more unsafe blocks
* Simplify fd_read
* Bundle up unsafes in fd_readdir
* Simplify fd_write
* Add comment to path_readlink re zero-len buffers
* Simplify unsafes in random_get
* Hide GuestPtr<str> to &str in path::get
* Rewrite pread and pwrite using SeekFrom and read/write_vectored
I've left the implementation of VirtualFs pretty much untouched
as I don't feel that comfortable in changing the API too much.
Having said that, I reckon `pread` and `pwrite` could be refactored
out, and `preadv` and `pwritev` could be entirely rewritten using
`seek` and `read_vectored` and `write_vectored`.
* Add comment about VirtFs unsafety
* Fix all mentions of FdEntry to Entry
* Fix warnings on Win
* Add aux struct EntryTable responsible for Fds and Entries
This commit adds aux struct `EntryTable` which is private to `WasiCtx`
and is basically responsible for `Fd` alloc/dealloc as well as storing
matching `Entry`s. This struct is entirely private to `WasiCtx` and
as such as should remain transparent to `WasiCtx` users.
* Remove redundant check for empty buffer in path_readlink
* Preserve and rewind file cursor in pread/pwrite
* Use GuestPtr<[u8]>::copy_from_slice wherever copying bytes directly
* Use GuestPtr<[u8]>::copy_from_slice in fd_readdir
* Clean up unsafes around WasiCtx accessors
* Fix bugs in args_get and environ_get
* Fix conflicts after rebase
* Add a first-class way of accessing caller's exports
This commit is a continuation of #1237 and updates the API of `Func` to
allow defining host functions which have easy access to a caller's
memory in particular. The new APIs look like so:
* The `Func::wrap*` family of functions was condensed into one
`Func::wrap` function.
* The ABI layer of conversions in `WasmTy` were removed
* An optional `Caller<'_>` argument can be at the front of all
host-defined functions now.
The old way the wasi bindings looked up memory has been removed and is
now replaced with the `Caller` type. The `Caller` type has a
`get_export` method on it which allows looking up a caller's export by
name, allowing you to get access to the caller's memory easily, and even
during instantiation.
* Add a temporary note
* Move some docs
* Update wasi submodule
Removes some dependencies from the `witx` crate since WebAssembly/WASI#243
* Don't pull witx from two places
* Update submodule again
* Rename FdEntry to Entry
* Add custom FdSet container for managing fd allocs/deallocs
This commit adds a custom `FdSet` container which is intended
for use in `wasi-common` to track WASI fd allocs/deallocs. The
main aim for this container is to abstract away the current
approach of spawning new handles
```rust
fd = fd.checked_add(1).ok_or(...)?;
```
and to make it possible to reuse unused/reclaimed handles
which currently is not done.
The struct offers 3 methods to manage its functionality:
* `FdSet::new` initialises the internal data structures,
and most notably, it preallocates an `FdSet::BATCH_SIZE`
worth of handles in such a way that we always start popping
from the "smallest" handle (think of it as of reversed stack,
I guess; it's not a binary heap since we don't really care
whether internally the handles are sorted in some way, just that
the "largets" handle is at the bottom. Why will become clear
when describing `allocate` method.)
* `FdSet::allocate` pops the next available handle if one is available.
The tricky bit here is that, if we run out of handles, we preallocate
the next `FdSet::BATCH_SIZE` worth of handles starting from the
latest popped handle (i.e., the "largest" handle). This
works only because we make sure to only ever pop and push already
existing handles from the back, and push _new_ handles (from the
preallocation step) from the front. When we ultimately run out
of _all_ available handles, we then return `None` for the client
to handle in some way (e.g., throwing an error such as `WasiError::EMFILE`
or whatnot).
* `FdSet::deallocate` returns the already allocated handle back to
the pool for further reuse.
When figuring out the internals, I've tried to optimise for both
alloc and dealloc performance, and I believe we've got an amortised
`O(1)~*` performance for both (if my maths is right, and it may very
well not be, so please verify!).
In order to keep `FdSet` fairly generic, I've made sure not to hard-code
it for the current type system generated by `wig` (i.e., `wasi::__wasi_fd_t`
representing WASI handle), but rather, any type which wants to be managed
by `FdSet` needs to conform to `Fd` trait. This trait is quite simple as
it only requires a couple of rudimentary traits (although `std:#️⃣:Hash`
is quite a powerful assumption here!), and a custom method
```rust
Fd::next(&self) -> Option<Self>;
```
which is there to encapsulate creating another handle from the given one.
In the current state of the code, that'd be simply `u32::checked_add(1)`.
When `wiggle` makes it way into the `wasi-common`, I'd imagine it being
similar to
```rust
fn next(&self) -> Option<Self> {
self.0.checked_add(1).map(Self::from)
}
```
Anyhow, I'd be happy to learn your thoughts about this design!
* Fix compilation on other targets
* Rename FdSet to FdPool
* Fix FdPool unit tests
* Skip preallocation step in FdPool
* Replace 'replace' calls with direct assignment
* Reuse FdPool from snapshot1 in snapshot0
* Refactor FdPool::allocate
* Remove entry before deallocating the fd
* Refactor the design to accommodate `u32` as underlying type
This commit refactors the design by ensuring that the underlying
type in `FdPool` which we use to track and represent raw file
descriptors is `u32`. As a result, the structure of `FdPool` is
simplified massively as we no longer need to track the claimed
descriptors; in a way, we trust the caller to return the handle
after it's done with it. In case the caller decides to be clever
and return a handle which was not yet legally allocated, we panic.
This should never be a problem in `wasi-common` unless we hit a
bug.
To make all of this work, `Fd` trait is modified to require two
methods: `as_raw(&self) -> u32` and `from_raw(raw_fd: u32) -> Self`
both of which are used to convert to and from the `FdPool`'s underlying
type `u32`.
* Add armv7 support to wasi-common
This commit enables `target_pointer_width = 32` compatibility for
`wasi-common` (and by transitivity, any crate found inside, e.g., `yanix`).
I've also added a simplistic (bare minimum) check to our CI to ensure
that `wasi-common` cross-compiles to `armv7-unknown-gnueabihf` fine.
While here, I've done the same for `wasm32-unknown-emscripten`.
* Clean arch-specific impls + reuse libc consts
* Make SeekLoc::from_raw platform independent
* Collapse CI cc jobs into one
* Introduce WasiCtxBuilderError error type
`WasiCtxBuilderError` is the `wasi-common` client-facing error type
which is exclusively thrown when building a new `WasiCtx` instance.
As such, building such an instance should not require the client to
understand different WASI errno values as was assumed until now.
This commit is a first step at streamlining error handling in
`wasi-common` and makes way for the `wiggle` crate.
When adding the `WasiCtxBuilderError`, I've had to do two things of
notable importance:
1. I've removed a couple of `ok_or` calls in `WasiCtxBuilder::build`
and replaced them with `unwrap`s, following the same pattern in
different builder methods above. This is fine since we _always_
operate on non-empty `Option`s in `WasiCtxBuilder` thus `unwrap`ing
will never fail. On the other hand, this might be a good opportunity
to rethink the structure of our builder, and how we good remove
the said `Option`s especially since we always populate them with
empty containers to begin with. I understand this is to make
chaining of builder methods easier which take and return `&mut self`
and the same applies to `WasiCtxBuilder::build(&mut self)` method,
but perhaps it would more cleanly signal the intentions if we simply
moved `WasiCtxBuilder` instance around. Food for thought!
2. Methods specific to determining rights of passed around `std::fs::File`
objects when populating `WasiCtx` `FdEntry` entities now return
`io::Error` directly so that we can reuse them in `WasiCtxBuilder` methods
(returning `WasiCtxBuilderError` error type), and in syscalls
(returning WASI errno).
* Return WasiError directly in syscalls
Also, removes `error::Error` type altogether. Now, `io::Error` and
related are automatically converted to their corresponding WASI
errno value encapsulated as `WasiError`.
While here, it made sense to me to move `WasiError` to `wasi` module
which will align itself well with the upcoming changes introduced
by `wiggle`. To different standard `Result` from WASI specific, I've
created a helper alias `WasiResult` also residing in `wasi` module.
* Update wig
* Add from ffi::NulError and pass context to NotADirectory
* Add dummy commit to test CI
* Move filetime module to yanix
I've noticed that we could replace every occurrence of `crate::Result`
in `filetime` mods with `io::Result`, so I thought why not move it
to `yanix` and get rid off a lot of unnecessary code duplication
within `wasi-common`. Now, ideally I'd have our `filetime` modifications
backported to Alex's [`filetime`] crate, but one step at a time
(apologies Alex, I was meant to backport this ages ago, just didn't
find the time yet... :-().
Anyway, this commit does just that; i.e., moves the `filetime` modules
into `yanix` which seems a better fit for this type of code.
[`filetime`]: https://github.com/alexcrichton/filetime
There is one caveat here. On Emscripten, converting between `filetime::Filetime`
and `libc::timespec` appears to be lossy, at least as far as the
types are concerned. Now, `filetime::Filetime`'s seconds field is
`i64` while nanoseconds field is `u32`, while Emscripten's
`libc::timespec` requires both to be `i32` width. This might actually
not be a problem since I don't think it's possible to fill `filetime::Filetime`
struct with values of width wider than `i32` since Emscripten is 32bit
but just to be on the safe side, we do a `TryInto` conversion, log
the error (if any), and return `libc::EOVERFLOW`.
* Run cargo fmt
* Use i64::from instead of as cast
* Winx now returns io::Error
This commit is a spiritual follower of #1242 in the sense that it
adjusts `winx` to also return `io::Error` directly rather than
tossing a custom error type here and there.
* Adapt wasi-common to changes in winx
* Run cargo fmt
* Swap overly big map_err with explicit match
* Yanix now returns io::Error
This commit may seem somewhat controversial at first, but hear me
out first. Currently, Yanix would return a custom error that's a
wrapper around three other error types returned by various entities
inside Rust's `libstd`. In particular, Yanix's error type would wrap
`io::Error`, `num::TryFromIntError` and `ffi::NulError`. It turns
out that there is a natural conversion between the first and the last
and provided by the standard library, i.e., `From<ffi::NulError> for io::Error`
is provided. So at the surface it may seem that only the first two
wrapped error types are worth keeping.
Digging a little bit deeper into `libstd`, `num::TryFromIntError`
is essentially speaking only a marker that the integral conversion
went wrong. The struct implementing this error stores a unit type,
and nothing more. It therefore seems like a waste to wrap this
particular error when we could unify everything under `io::Error`.
And so, whenever we perform an int conversion, I suggest we simply
remap the error to `io::Error::from_raw_os_error(libc::EOVERFLOW)`
since this carries a comparable amount of information.
As a result of completely discarding `yanix::Error` custom error type,
we are invariably simplifying `yanix` itself, but also allowing
`wasi-common` to simplify in several places as well.
* Adapt wasi-common to changes in yanix
* Add Cargo.lock
* Unwrap try_into's where possible
* Remove unnecessary type annotation
* Add support for virtual files (eg, not backed by an OS file).
Virtual files are implemented through trait objects, with a default
implementation that tries to behave like on-disk files, but entirely
backed by in-memory structures.
Co-authored-by: Dan Gohman <sunfish@mozilla.com>
* Reuse std::io::Error for raw *nix errno
This commit removes custom `yanix::Errno` and instead (as was
previously suggested) reuses `std::io::Error` to generate and wrap
raw *nix errno value.
* Update wasi-common to use new Yanix error type
This commit updates `wasi-common` to use new way of handling raw
OS error in `yanix`; i.e., via re-use of `std::io::Error` instead
of a custom `Errno` enum.
* Fix formatting
* Unwrap if io::Error created from raw OS error
This commit calls `unwrap` on `err` if that one was created via
`io::Error::last_os_error()`. It also refactors error matching
in several syscalls on the BSD platform (mainly).
* Add a version to a path dependeency for publishing on crates.io.
* Add a README.md for wasmtime-profiling.
* Add versions to the wasmtime-profiling dependencies.
This commit makes `WasiCtxBuilder` take `&mut Self` and return `&mut
Self` for its methods. This is needed to allow for the same
(unmoved) `WasiCtxBuilder` to be used when building a WASI context.
Also fixes up the C API to remove the unnecessary `Box::from_raw` and
`forget` calls which were previously needed for the moving version of
`WasiCtxBuilder`.
This commit implements an initial WASI C API that can be used to instantiate
and configure a WASI instance from C.
This also implements a `WasiBuilder` for the C# API enabling .NET hosts to bind
to Wasmtime's WASI implementation.
This commit does a bit of everything: refactors bits here and there,
fixes a bug discovered in another #701, and combines all structs that
we used in `yanix` and `wasi-common` crates to represent file types
on *nix into one struct, `yanix::file::FileType`.
Up until now, in `yanix`, we've had two separate structs used to
represent file types on the host: `yanix::dir::FileType` and
`yanix::file::SFlags` (well, not quite, but that was its main use).
They both were used in different context (the former when parsing
`dirent` struct, and the latter when parsing `stat` struct), they
were C-compatible (as far as their representation goes), and as it
turns out, they shared possible enumeration values. This commit
combines them both into an idiomatic Rust enum with the caveat that
it is now *not* C-compatible, however, I couldn't find a single use
where that would actually matter, and even if it does in the future,
we can simply add appropriate impl methods.
The combine `yanix::file::FileType` struct can be constructed in two
ways: 1) either from `stat.st_mode` value (and while we're here,
now it's done correctly according to POSIX which fixes the bug mentioned
in VFS impl PR #701), or 2) from `dirent.d_type` value. Also, since we now
have one struct for representing both contexts, this cleans up nicely
a lot of duplicated code in `host` module.
* witx tagged unions: updates to wig to use new semantics
* wig: emit a `#variant: ()` union variant for empty variants
* wasi-common: translate to use tagged unions
* update to flattened layout of event struct
* wig: generate layout tests, and delete bindgen ones
the bindgen tests became out-of-date with the latest changes to the
representation of unions, and the re-jiggering of various struct
definitions that went along with it.
* wasi: point at master with tagged union PR merged
* fix event struct repr on windows
* Reimplement `wasmtime-wasi` on top of `wasmtime`
This commit reimplements the `wasmtime-wasi` crate on top of the
`wasmtime` API crate, instead of being placed on top of the `wasmtime-*`
family of internal crates. The purpose here is to continue to exercise
the API as well as avoid usage of internals wherever possible and
instead use the safe API as much as possible.
The `wasmtime-wasi` crate's API has been updated as part of this PR as
well. The general outline of it is now:
* Each module snapshot has a `WasiCtxBuilder`, `WasiCtx`, and `Wasi`
type.
* The `WasiCtx*` types are reexported from `wasi-common`.
* The `Wasi` type is synthesized by the `wig` crate's procedural macro
* The `Wasi` type exposes one constructor which takes a `Store` and a
`WasiCtx`, and produces a `Wasi`
* Each `Wasi` struct fields for all the exported functions in that wasi
module. They're all public an they all have type `wasmtime::Func`
* The `Wasi` type has a `get_export` method to fetch an struct field by
name.
The intention here is that we can continue to make progress on #727 by
integrating WASI construction into the `Instance::new` experience, but
it requires everything to be part of the same system!
The main oddity required by the `wasmtime-wasi` crate is that it needs
access to the caller's `memory` export, if any. This is currently done
with a bit of a hack and is expected to go away once interface types are
more fully baked in.
* Remove now no-longer-necessary APIs from `wasmtime`
* rustfmt
* Rename to from_abi
