This ports all of the identity, no-op, simplification, and canonicalization
related optimizations over from being hand-coded to the `peepmatic` DSL. This
does not handle the branch-to-branch optimizations or most of the
divide-by-constant optimizations.
* Implement interrupting wasm code, reimplement stack overflow
This commit is a relatively large change for wasmtime with two main
goals:
* Primarily this enables interrupting executing wasm code with a trap,
preventing infinite loops in wasm code. Note that resumption of the
wasm code is not a goal of this commit.
* Additionally this commit reimplements how we handle stack overflow to
ensure that host functions always have a reasonable amount of stack to
run on. This fixes an issue where we might longjmp out of a host
function, skipping destructors.
Lots of various odds and ends end up falling out in this commit once the
two goals above were implemented. The strategy for implementing this was
also lifted from Spidermonkey and existing functionality inside of
Cranelift. I've tried to write up thorough documentation of how this all
works in `crates/environ/src/cranelift.rs` where gnarly-ish bits are.
A brief summary of how this works is that each function and each loop
header now checks to see if they're interrupted. Interrupts and the
stack overflow check are actually folded into one now, where function
headers check to see if they've run out of stack and the sentinel value
used to indicate an interrupt, checked in loop headers, tricks functions
into thinking they're out of stack. An interrupt is basically just
writing a value to a location which is read by JIT code.
When interrupts are delivered and what triggers them has been left up to
embedders of the `wasmtime` crate. The `wasmtime::Store` type has a
method to acquire an `InterruptHandle`, where `InterruptHandle` is a
`Send` and `Sync` type which can travel to other threads (or perhaps
even a signal handler) to get notified from. It's intended that this
provides a good degree of flexibility when interrupting wasm code. Note
though that this does have a large caveat where interrupts don't work
when you're interrupting host code, so if you've got a host import
blocking for a long time an interrupt won't actually be received until
the wasm starts running again.
Some fallout included from this change is:
* Unix signal handlers are no longer registered with `SA_ONSTACK`.
Instead they run on the native stack the thread was already using.
This is possible since stack overflow isn't handled by hitting the
guard page, but rather it's explicitly checked for in wasm now. Native
stack overflow will continue to abort the process as usual.
* Unix sigaltstack management is now no longer necessary since we don't
use it any more.
* Windows no longer has any need to reset guard pages since we no longer
try to recover from faults on guard pages.
* On all targets probestack intrinsics are disabled since we use a
different mechanism for catching stack overflow.
* The C API has been updated with interrupts handles. An example has
also been added which shows off how to interrupt a module.
Closes#139Closes#860Closes#900
* Update comment about magical interrupt value
* Store stack limit as a global value, not a closure
* Run rustfmt
* Handle review comments
* Add a comment about SA_ONSTACK
* Use `usize` for type of `INTERRUPTED`
* Parse human-readable durations
* Bring back sigaltstack handling
Allows libstd to print out stack overflow on failure still.
* Add parsing and emission of stack limit-via-preamble
* Fix new example for new apis
* Fix host segfault test in release mode
* Fix new doc example
This commit makes the following changes to unwind information generation in
Cranelift:
* Remove frame layout change implementation in favor of processing the prologue
and epilogue instructions when unwind information is requested. This also
means this work is no longer performed for Windows, which didn't utilize it.
It also helps simplify the prologue and epilogue generation code.
* Remove the unwind sink implementation that required each unwind information
to be represented in final form. For FDEs, this meant writing a
complete frame table per function, which wastes 20 bytes or so for each
function with duplicate CIEs. This also enables Cranelift users to collect the
unwind information and write it as a single frame table.
* For System V calling convention, the unwind information is no longer stored
in code memory (it's only a requirement for Windows ABI to do so). This allows
for more compact code memory for modules with a lot of functions.
* Deletes some duplicate code relating to frame table generation. Users can
now simply use gimli to create a frame table from each function's unwind
information.
Fixes#1181.
- Undo temporary changes to default features (`all-arch`) and a
signal-handler test.
- Remove `SIGTRAP` handler: no longer needed now that we've found an
"undefined opcode" option on ARM64.
- Rename pp.rs to pretty_print.rs in machinst/.
- Only use empty stack-probe on non-x86. As per a comment in
rust-lang/compiler-builtins [1], LLVM only supports stack probes on
x86 and x86-64. Thus, on any other CPU architecture, we cannot refer
to `__rust_probestack`, because it does not exist.
- Rename arm64 to aarch64.
- Use `target` directive in vcode filetests.
- Run the flags verifier, but without encinfo, when using new backends.
- Clean up warning overrides.
- Fix up use of casts: use u32::from(x) and siblings when possible,
u32::try_from(x).unwrap() when not, to avoid silent truncation.
- Take immutable `Function` borrows as input; we don't actually
mutate the input IR.
- Lots of other miscellaneous cleanups.
[1] cae3e6ea23/src/probestack.rs (L39)
This patch ties together the new backend infrastructure with the
existing Cranelift codegen APIs.
With all patches in this series up to this patch applied, the ARM64
compiler is now functional and can be used. Two uses of this
functionality -- filecheck-based tests and integration into wasmtime --
will come in subsequent patches.
* Manually rename BasicBlock to BlockPredecessor
BasicBlock is a pair of (Ebb, Inst) that is used to represent the
basic block subcomponent of an Ebb that is a predecessor to an Ebb.
Eventually we will be able to remove this struct, but for now it
makes sense to give it a non-conflicting name so that we can start
to transition Ebb to represent a basic block.
I have not updated any comments that refer to BasicBlock, as
eventually we will remove BlockPredecessor and replace with Block,
which is a basic block, so the comments will become correct.
* Manually rename SSABuilder block types to avoid conflict
SSABuilder has its own Block and BlockData types. These along with
associated identifier will cause conflicts in a later commit, so
they are renamed to be more verbose here.
* Automatically rename 'Ebb' to 'Block' in *.rs
* Automatically rename 'EBB' to 'block' in *.rs
* Automatically rename 'ebb' to 'block' in *.rs
* Automatically rename 'extended basic block' to 'basic block' in *.rs
* Automatically rename 'an basic block' to 'a basic block' in *.rs
* Manually update comment for `Block`
`Block`'s wikipedia article required an update.
* Automatically rename 'an `Block`' to 'a `Block`' in *.rs
* Automatically rename 'extended_basic_block' to 'basic_block' in *.rs
* Automatically rename 'ebb' to 'block' in *.clif
* Manually rename clif constant that contains 'ebb' as substring to avoid conflict
* Automatically rename filecheck uses of 'EBB' to 'BB'
'regex: EBB' -> 'regex: BB'
'$EBB' -> '$BB'
* Automatically rename 'EBB' 'Ebb' to 'block' in *.clif
* Automatically rename 'an block' to 'a block' in *.clif
* Fix broken testcase when function name length increases
Test function names are limited to 16 characters. This causes
the new longer name to be truncated and fail a filecheck test. An
outdated comment was also fixed.
* All: Drop 'basic-blocks' feature
This makes it so that 'basic-blocks' cannot be disabled and we can
start assuming it everywhere.
* Tests: Replace non-bb filetests with bb version
* Tests: Adapt solver-fixedconflict filetests to use basic blocks
* Add x86 encodings for `bint` converting to `i8` and `i16`
* Introduce tests for many multi-value returns
* Support arbitrary numbers of return values
This commit implements support for returning an arbitrary number of return
values from a function. During legalization we transform multi-value signatures
to take a struct return ("sret") return pointer, instead of returning its values
in registers. Callers allocate the sret space in their stack frame and pass a
pointer to it into the caller, and once the caller returns to them, they load
the return values back out of the sret stack slot. The callee's return
operations are legalized to store the return values through the given sret
pointer.
* Keep track of old, pre-legalized signatures
When legalizing a call or return for its new legalized signature, we may need to
look at the old signature in order to figure out how to legalize the call or
return.
* Add test for multi-value returns and `call_indirect`
* Encode bool -> int x86 instructions in a loop
* Rename `Signature::uses_sret` to `Signature::uses_struct_return_param`
* Rename `p` to `param`
* Add a clarifiying comment in `num_registers_required`
* Rename `num_registers_required` to `num_return_registers_required`
* Re-add newline
* Handle already-assigned parameters in `num_return_registers_required`
* Document what some debug assertions are checking for
* Make "illegalizing" closure's control flow simpler
* Add unit tests and comments for our rounding-up-to-the-next-multiple-of-a-power-of-2 function
* Use `append_isnt_arg` instead of doing the same thing manually
* Fix grammar in comment
* Add `Signature::uses_special_{param,return}` helper functions
* Inline the definition of `legalize_type_for_sret_load` for readability
* Move sret legalization debug assertions out into their own function
* Add `round_up_to_multiple_of_type_align` helper for readability
* Add a debug assertion that we aren't removing the wrong return value
* Rename `RetPtr` stack slots to `StructReturnSlot`
* Make `legalize_type_for_sret_store` more symmetrical to `legalized_type_for_sret`
* rustfmt
* Remove unnecessary loop labels
* Do not pre-assign offsets to struct return stack slots
Instead, let the existing frame layout algorithm decide where they should go.
* Expand "sret" into explicit "struct return" in doc comment
* typo: "than" -> "then" in comment
* Fold test's debug message into the assertion itself
* Implement emitting Windows unwind information for fastcall functions.
This commit implements emitting Windows unwind information for x64 fastcall
calling convention functions.
The unwind information can be used to construct a Windows function table at
runtime for JIT'd code, enabling stack walking and unwinding by the operating
system.
* Address code review feedback.
This commit addresses code review feedback:
* Remove unnecessary unsafe code.
* Emit the unwind information always as little endian.
* Fix comments.
A dependency from cranelift-codegen to the byteorder crate was added.
The byteorder crate is a no-dependencies crate with a reasonable
abstraction for writing binary data for a specific endianness.
* Address code review feedback.
* Disable default features for the `byteorder` crate.
* Add a comment regarding the Windows ABI unwind code numerical values.
* Panic if we encounter a Windows function with a prologue greater than 256
bytes in size.
