Remove the boolean types from cranelift, and the associated instructions breduce, bextend, bconst, and bint. Standardize on using 1/0 for the return value from instructions that produce scalar boolean results, and -1/0 for boolean vector elements.
Fixes#3205
Co-authored-by: Afonso Bordado <afonso360@users.noreply.github.com>
Co-authored-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Co-authored-by: Chris Fallin <chris@cfallin.org>
* egraph-based midend: draw the rest of the owl.
* Rename `egg` submodule of cranelift-codegen to `egraph`.
* Apply some feedback from @jsharp during code walkthrough.
* Remove recursion from find_best_node by doing a single pass.
Rather than recursively computing the lowest-cost node for a given
eclass and memoizing the answer at each eclass node, we can do a single
forward pass; because every eclass node refers only to earlier nodes,
this is sufficient. The behavior may slightly differ from the earlier
behavior because we cannot short-circuit costs to zero once a node is
elaborated; but in practice this should not matter.
* Make elaboration non-recursive.
Use an explicit stack instead (with `ElabStackEntry` entries,
alongside a result stack).
* Make elaboration traversal of the domtree non-recursive/stack-safe.
* Work analysis logic in Cranelift-side egraph glue into a general analysis framework in cranelift-egraph.
* Apply static recursion limit to rule application.
* Fix aarch64 wrt dynamic-vector support -- broken rebase.
* Topo-sort cranelift-egraph before cranelift-codegen in publish script, like the comment instructs me to!
* Fix multi-result call testcase.
* Include `cranelift-egraph` in `PUBLISHED_CRATES`.
* Fix atomic_rmw: not really a load.
* Remove now-unnecessary PartialOrd/Ord derivations.
* Address some code-review comments.
* Review feedback.
* Review feedback.
* No overlap in mid-end rules, because we are defining a multi-constructor.
* rustfmt
* Review feedback.
* Review feedback.
* Review feedback.
* Review feedback.
* Remove redundant `mut`.
* Add comment noting what rules can do.
* Review feedback.
* Clarify comment wording.
* Update `has_memory_fence_semantics`.
* Apply @jameysharp's improved loop-level computation.
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Fix suggestion commit.
* Fix off-by-one in new loop-nest analysis.
* Review feedback.
* Review feedback.
* Review feedback.
* Use `Default`, not `std::default::Default`, as per @fitzgen
Co-authored-by: Nick Fitzgerald <fitzgen@gmail.com>
* Apply @fitzgen's comment elaboration to a doc-comment.
Co-authored-by: Nick Fitzgerald <fitzgen@gmail.com>
* Add stat for hitting the rewrite-depth limit.
* Some code motion in split prelude to make the diff a little clearer wrt `main`.
* Take @jameysharp's suggested `try_into()` usage for blockparam indices.
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Take @jameysharp's suggestion to avoid double-match on load op.
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Fix suggestion (add import).
* Review feedback.
* Fix stack_load handling.
* Remove redundant can_store case.
* Take @jameysharp's suggested improvement to FuncEGraph::build() logic
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Tweaks to FuncEGraph::build() on top of suggestion.
* Take @jameysharp's suggested clarified condition
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Clean up after suggestion (unused variable).
* Fix loop analysis.
* loop level asserts
* Revert constant-space loop analysis -- edge cases were incorrect, so let's go with the simple thing for now.
* Take @jameysharp's suggestion re: result_tys
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Fix up after suggestion
* Take @jameysharp's suggestion to use fold rather than reduce
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Fixup after suggestion
* Take @jameysharp's suggestion to remove elaborate_eclass_use's return value.
* Clarifying comment in terminator insts.
Co-authored-by: Jamey Sharp <jamey@minilop.net>
Co-authored-by: Nick Fitzgerald <fitzgen@gmail.com>
* Initial forward-edge CFI implementation
Give the user the option to start all basic blocks that are targets
of indirect branches with the BTI instruction introduced by the
Branch Target Identification extension to the Arm instruction set
architecture.
Copyright (c) 2022, Arm Limited.
* Refactor `from_artifacts` to avoid second `make_executable` (#1)
This involves "parsing" twice but this is parsing just the header of an
ELF file so it's not a very intensive operation and should be ok to do
twice.
* Address the code review feedback
Copyright (c) 2022, Arm Limited.
Co-authored-by: Alex Crichton <alex@alexcrichton.com>
This PR adds a basic *alias analysis*, and optimizations that use it.
This is a "mid-end optimization": it operates on CLIF, the
machine-independent IR, before lowering occurs.
The alias analysis (or maybe more properly, a sort of memory-value
analysis) determines when it can prove a particular memory
location is equal to a given SSA value, and when it can, it replaces any
loads of that location.
This subsumes two common optimizations:
* Redundant load elimination: when the same memory address is loaded two
times, and it can be proven that no intervening operations will write
to that memory, then the second load is *redundant* and its result
must be the same as the first. We can use the first load's result and
remove the second load.
* Store-to-load forwarding: when a load can be proven to access exactly
the memory written by a preceding store, we can replace the load's
result with the store's data operand, and remove the load.
Both of these optimizations rely on a "last store" analysis that is a
sort of coloring mechanism, split across disjoint categories of abstract
state. The basic idea is that every memory-accessing operation is put
into one of N disjoint categories; it is disallowed for memory to ever
be accessed by an op in one category and later accessed by an op in
another category. (The frontend must ensure this.)
Then, given this, we scan the code and determine, for each
memory-accessing op, when a single prior instruction is a store to the
same category. This "colors" the instruction: it is, in a sense, a
static name for that version of memory.
This analysis provides an important invariant: if two operations access
memory with the same last-store, then *no other store can alias* in the
time between that last store and these operations. This must-not-alias
property, together with a check that the accessed address is *exactly
the same* (same SSA value and offset), and other attributes of the
access (type, extension mode) are the same, let us prove that the
results are the same.
Given last-store info, we scan the instructions and build a table from
"memory location" key (last store, address, offset, type, extension) to
known SSA value stored in that location. A store inserts a new mapping.
A load may also insert a new mapping, if we didn't already have one.
Then when a load occurs and an entry already exists for its "location",
we can reuse the value. This will be either RLE or St-to-Ld depending on
where the value came from.
Note that this *does* work across basic blocks: the last-store analysis
is a full iterative dataflow pass, and we are careful to check dominance
of a previously-defined value before aliasing to it at a potentially
redundant load. So we will do the right thing if we only have a
"partially redundant" load (loaded already but only in one predecessor
block), but we will also correctly reuse a value if there is a store or
load above a loop and a redundant load of that value within the loop, as
long as no potentially-aliasing stores happen within the loop.
In particular, introduce initial support for the MOVI and MVNI
instructions, with 8-bit elements. Also, treat vector constants
as 32- or 64-bit floating-point numbers, if their value allows
it, by relying on the architectural zero extension. Finally,
stop generating literal loads for 32-bit constants.
Copyright (c) 2020, Arm Limited.
The pinned register hack didn't work because the GetPinnedReg is marked
as having side-effects, so that GVN wouldn't try to common it out.
This commit tweaks the function used during lowering to vcode, so that
the GetPinnedReg opcode is specially handled. It's a bit lame, but it
makes the hack work again.
Also, use_input needs to be a no-op for real registers.
This commit adds support for generating stackmaps at safepoints to the
new backend framework and to the AArch64 backend in particular. It has
been tested to work with SpiderMonkey.
This patch includes:
- A complete rework of the way that CLIF blocks and edge blocks are
lowered into VCode blocks. The new mechanism in `BlockLoweringOrder`
computes RPO over the CFG, but with a twist: it merges edge blocks intto
heads or tails of original CLIF blocks wherever possible, and it does
this without ever actually materializing the full nodes-plus-edges
graph first. The backend driver lowers blocks in final order so
there's no need to reshuffle later.
- A new `MachBuffer` that replaces the `MachSection`. This is a special
version of a code-sink that is far more than a humble `Vec<u8>`. In
particular, it keeps a record of label definitions and label uses,
with a machine-pluggable `LabelUse` trait that defines various types
of fixups (basically internal relocations).
Importantly, it implements some simple peephole-style branch rewrites
*inline in the emission pass*, without any separate traversals over
the code to use fallthroughs, swap taken/not-taken arms, etc. It
tracks branches at the tail of the buffer and can (i) remove blocks
that are just unconditional branches (by redirecting the label), (ii)
understand a conditional/unconditional pair and swap the conditional
polarity when it's helpful; and (iii) remove branches that branch to
the fallthrough PC.
The `MachBuffer` also implements branch-island support. On
architectures like AArch64, this is needed to allow conditional
branches within plausibly-attainable ranges (+/- 1MB on AArch64
specifically). It also does this inline while streaming through the
emission, without any sort of fixpoint algorithm or later moving of
code, by simply tracking outstanding references and "deadlines" and
emitting an island just-in-time when we're in danger of going out of
range.
- A rework of the instruction selector driver. This is largely following
the same algorithm as before, but is cleaned up significantly, in
particular in the API: the machine backend can ask for an input arg
and get any of three forms (constant, register, producing
instruction), indicating it needs the register or can merge the
constant or producing instruction as appropriate. This new driver
takes special care to emit constants right at use-sites (and at phi
inputs), minimizing their live-ranges, and also special-cases the
"pinned register" to avoid superfluous moves.
Overall, on `bz2.wasm`, the results are:
wasmtime full run (compile + runtime) of bz2:
baseline: 9774M insns, 9742M cycles, 3.918s
w/ changes: 7012M insns, 6888M cycles, 2.958s (24.5% faster, 28.3% fewer insns)
clif-util wasm compile bz2:
baseline: 2633M insns, 3278M cycles, 1.034s
w/ changes: 2366M insns, 2920M cycles, 0.923s (10.7% faster, 10.1% fewer insns)
All numbers are averages of two runs on an Ampere eMAG.
- Undo temporary changes to default features (`all-arch`) and a
signal-handler test.
- Remove `SIGTRAP` handler: no longer needed now that we've found an
"undefined opcode" option on ARM64.
- Rename pp.rs to pretty_print.rs in machinst/.
- Only use empty stack-probe on non-x86. As per a comment in
rust-lang/compiler-builtins [1], LLVM only supports stack probes on
x86 and x86-64. Thus, on any other CPU architecture, we cannot refer
to `__rust_probestack`, because it does not exist.
- Rename arm64 to aarch64.
- Use `target` directive in vcode filetests.
- Run the flags verifier, but without encinfo, when using new backends.
- Clean up warning overrides.
- Fix up use of casts: use u32::from(x) and siblings when possible,
u32::try_from(x).unwrap() when not, to avoid silent truncation.
- Take immutable `Function` borrows as input; we don't actually
mutate the input IR.
- Lots of other miscellaneous cleanups.
[1] cae3e6ea23/src/probestack.rs (L39)
