The casloop_emit function in the s390x backend was using the fixed non-allocatable register %r0 directly with move instructions, which produced a panic in the regalloc2 checker (#5425). This PR changes the casloop_result function to use mov_preg instead of copy_reg to fetch the result, as it's not viewed by regalloc2 as a move.
Fixes#5425
* aarch64: constant generation cleanup
Add support for MOVZ and MOVN generation via ISLE.
Handle f32const, f64const, and nop instructions via ISLE.
No longer call Inst::gen_constant from lower.rs.
* riscv64: constant generation cleanup
Handle f32const, f64const, and nop instructions via ISLE.
* s390x: constant generation cleanup
Fix rule priorities for "imm" term.
Only handle 32-bit stack offsets; no longer use load_constant64.
* x64: constant generation cleanup
No longer call Inst::gen_constant from lower.rs or abi.rs.
* Refactor LowerBackend::lower to return InstOutput
No longer write to the per-insn output registers; instead, return
an InstOutput vector of temp registers holding the outputs.
This will allow calling LowerBackend::lower multiple times for
the same instruction, e.g. to rematerialize constants.
When emitting the primary copy of the instruction during lowering,
writing to the per-insn registers is now done in lower_clif_block.
As a result, the ISLE lower_common routine is no longer needed.
In addition, the InsnOutput type and all code related to it
can be removed as well.
* Refactor IsleContext to hold a LowerBackend reference
Remove the "triple", "flags", and "isa_flags" fields that are
copied from LowerBackend to each IsleContext, and instead just
hold a reference to LowerBackend in IsleContext.
This will allow calling LowerBackend::lower from within callbacks
in src/machinst/isle.rs, e.g. to rematerialize constants.
To avoid having to pass LowerBackend references through multiple
functions, eliminate the lower_insn_to_regs subroutines in those
targets that still have them, and just inline into the main
lower routine. This also eliminates lower_inst.rs on aarch64
and riscv64.
Replace all accesses to the removed IsleContext fields by going
through the LowerBackend reference.
* Remove MachInst::gen_constant
This addresses the problem described in issue
https://github.com/bytecodealliance/wasmtime/issues/4426
that targets currently have to duplicate code to emit
constants between the ISLE logic and the gen_constant
callback.
After the various cleanups in earlier patches in this series,
the only remaining user of get_constant is put_value_in_regs
in Lower. This can now be removed, and instead constant
rematerialization can be performed in the put_in_regs ISLE
callback by simply directly calling LowerBackend::lower
on the instruction defining the constant (using a different
output register).
Since the check for egraph mode is now no longer performed in
put_value_in_regs, the Lower::flags member becomes obsolete.
Care needs to be taken that other calls directly to the
Lower::put_value_in_regs routine now handle the fact that
no more rematerialization is performed. All such calls in
target code already historically handle constants themselves.
The remaining call site in the ISLE gen_call_common helper
can be redirected to the ISLE put_in_regs callback.
The existing target implementations of gen_constant are then
unused and can be removed. (In some target there may still
be further opportunities to remove duplication between ISLE
and some local Rust code - this can be left to future patches.)
Avoid reusing a destination virtual register for 64-bit constants in the s390x backend. This change addresses a case identified by the regalloc2 ssa validator, as the destination register was written to twice when constants were generated via the MachInst::gen_constant function.
Modify return pseudo-instructions to have pairs of registers: virtual and real. This allows us to constrain the virtual registers to the real ones specified by the abi, instead of directly emitting moves to those real registers.
Remove uses of reg_mod from the s390x backend. This required moving away from using r0/r1 as the result registers from a few different pseudo instructions, standardizing instead on r2/r3. That change was necessary as regalloc2 will not correctly allocate registers that aren't listed in the allocatable set, which r0/r1 are not.
Co-authored-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Co-authored-by: Chris Fallin <chris@cfallin.org>
* s390x: update some regalloc metadata to remove use of `reg_mod`.
This is a step toward ultimately removing modify-operands, which along
with removal of pinned vregs, lets us move to a completely
constraint-based and fully-SSA regalloc input and get some nice
advantages eventually.
There are still a few uses of `mod` operands and pinned vregs remaining,
especially around the "regpair" abstraction. Those proved to be a bit
trickier to update though, so will have to be done separately.
* Review feedback: restore two-arg pretty-print form.
* Review feedback.
* ABI: implement register arguments with constraints.
Currently, Cranelift's ABI code emits a sequence of moves from physical
registers into vregs at the top of the function body, one for every
register-carried argument.
For a number of reasons, we want to move to operand constraints instead,
and remove the use of explicitly-named "pinned vregs"; this allows for
better regalloc in theory, as it removes the need to "reverse-engineer"
the sequence of moves.
This PR alters the ABI code so that it generates a single "args"
pseudo-instruction as the first instruction in the function body. This
pseudo-inst defs all register arguments, and constrains them to the
appropriate registers at the def-point. Subsequently the regalloc can
move them wherever it needs to.
Some care was taken not to have this pseudo-inst show up in
post-regalloc disassemblies, but the change did cause a general regalloc
"shift" in many tests, so the precise-output updates are a bit noisy.
Sorry about that!
A subsequent PR will handle the other half of the ABI code, namely, the
callsite case, with a similar preg-to-constraint conversion.
* Update based on review feedback.
* Review feedback.
This fixes two problems: minimum symbol alignment for the LARL
instruction, and alignment requirements for LRL/LGRL etc.
The first problem is that the LARL instruction used to load a
symbol address (PC relative) requires that the target symbol
is at least 2-byte aligned. This is always guaranteed for code
symbols (all instructions must be 2-aligned anyway), but not
necessarily for data symbols.
Other s390x compilers fix this problem by ensuring that all
global symbols are always emitted with a minimum 2-byte
alignment. This patch introduces an equivalent mechanism
for cranelift:
- Add a symbol_alignment routine to TargetIsa, similar to the
existing code_section_alignment routine.
- Respect symbol_alignment as minimum alignment for all symbols
emitted in the object backend (code and data).
The second problem is that PC-relative instructions that
directly *access* data (like LRL/LGRL, STRL/STGRL etc.)
not only have the 2-byte requirement like LARL, but actually
require that their memory operand is *naturally* aligned
(i.e. alignment is at least the size of the access).
This property (natural alignment for memory accesses) is
supposed to be provided by the "aligned" flag in MemFlags;
however, this is not implemented correctly at the moment.
To fix this, this patch:
- Only emits PC-relative memory access instructions if the
"aligned" flag is set in the associated MemFlags.
- Fixes a bug in emit_small_memory_copy and emit_small_memset
which currently set the aligned flag unconditionally, ignoring
the actual alignment info passed by their caller.
Tested with wasmtime and cg_clif.
* Cranelift: Remove `ABICallee` trait
It has only one implementation: the `ABICalleeImpl` struct. By using that
directly we can avoid unnecessary layers of generics and abstractions as well as
a couple `Box`es that were previously putting the single implementation into a
`Box<dyn>`.
* Cranelift: Rename `ABICalleeImpl` to `AbiCallee`
* Fix comments as per review
* Rename `AbiCallee` to `Callee`
This is the implementation of https://github.com/bytecodealliance/wasmtime/issues/4155, using the "inverted API" approach suggested by @cfallin (thanks!) in Cranelift, and trait object to provide a backend for an all-included experience in Wasmtime.
After the suggestion of Chris, `Function` has been split into mostly two parts:
- on the one hand, `FunctionStencil` contains all the fields required during compilation, and that act as a compilation cache key: if two function stencils are the same, then the result of their compilation (`CompiledCodeBase<Stencil>`) will be the same. This makes caching trivial, as the only thing to cache is the `FunctionStencil`.
- on the other hand, `FunctionParameters` contain the... function parameters that are required to finalize the result of compilation into a `CompiledCode` (aka `CompiledCodeBase<Final>`) with proper final relocations etc., by applying fixups and so on.
Most changes are here to accomodate those requirements, in particular that `FunctionStencil` should be `Hash`able to be used as a key in the cache:
- most source locations are now relative to a base source location in the function, and as such they're encoded as `RelSourceLoc` in the `FunctionStencil`. This required changes so that there's no need to explicitly mark a `SourceLoc` as the base source location, it's automatically detected instead the first time a non-default `SourceLoc` is set.
- user-defined external names in the `FunctionStencil` (aka before this patch `ExternalName::User { namespace, index }`) are now references into an external table of `UserExternalNameRef -> UserExternalName`, present in the `FunctionParameters`, and must be explicitly declared using `Function::declare_imported_user_function`.
- some refactorings have been made for function names:
- `ExternalName` was used as the type for a `Function`'s name; while it thus allowed `ExternalName::Libcall` in this place, this would have been quite confusing to use it there. Instead, a new enum `UserFuncName` is introduced for this name, that's either a user-defined function name (the above `UserExternalName`) or a test case name.
- The future of `ExternalName` is likely to become a full reference into the `FunctionParameters`'s mapping, instead of being "either a handle for user-defined external names, or the thing itself for other variants". I'm running out of time to do this, and this is not trivial as it implies touching ISLE which I'm less familiar with.
The cache computes a sha256 hash of the `FunctionStencil`, and uses this as the cache key. No equality check (using `PartialEq`) is performed in addition to the hash being the same, as we hope that this is sufficient data to avoid collisions.
A basic fuzz target has been introduced that tries to do the bare minimum:
- check that a function successfully compiled and cached will be also successfully reloaded from the cache, and returns the exact same function.
- check that a trivial modification in the external mapping of `UserExternalNameRef -> UserExternalName` hits the cache, and that other modifications don't hit the cache.
- This last check is less efficient and less likely to happen, so probably should be rethought a bit.
Thanks to both @alexcrichton and @cfallin for your very useful feedback on Zulip.
Some numbers show that for a large wasm module we're using internally, this is a 20% compile-time speedup, because so many `FunctionStencil`s are the same, even within a single module. For a group of modules that have a lot of code in common, we get hit rates up to 70% when they're used together. When a single function changes in a wasm module, every other function is reloaded; that's still slower than I expect (between 10% and 50% of the overall compile time), so there's likely room for improvement.
Fixes#4155.
This implements the s390x back-end portion of the solution for
https://github.com/bytecodealliance/wasmtime/issues/4566
We now support both big- and little-endian vector lane order
in code generation. The order used for a function is determined
by the function's ABI: if it uses a Wasmtime ABI, it will use
little-endian lane order, and big-endian lane order otherwise.
(This ensures that all raw_bitcast instructions generated by
both wasmtime and other cranelift frontends can always be
implemented as a no-op.)
Lane order affects the implementation of a number of operations:
- Vector immediates
- Vector memory load / store (in big- and little-endian variants)
- Operations explicitly using lane numbers
(insertlane, extractlane, shuffle, swizzle)
- Operations implicitly using lane numbers
(iadd_pairwise, narrow/widen, promote/demote, fcvt_low, vhigh_bits)
In addition, when calling a function using a different lane order,
we need to lane-swap all vector values passed or returned in registers.
A small number of changes to common code were also needed:
- Ensure we always select a Wasmtime calling convention on s390x
in crates/cranelift (func_signature).
- Fix vector immediates for filetests/runtests. In PR #4427,
I attempted to fix this by byte-swapping the V128 value, but
with the new scheme, we'd instead need to perform a per-lane
byte swap. Since we do not know the actual type in write_to_slice
and read_from_slice, this isn't easily possible.
Revert this part of PR #4427 again, and instead just mark the
memory buffer as little-endian when emitting the trampoline;
the back-end will then emit correct code to load the constant.
- Change a runtest in simd-bitselect-to-vselect.clif to no longer
make little-endian lane order assumptions.
- Remove runtests in simd-swizzle.clif that make little-endian
lane order assumptions by relying on implicit type conversion
when using a non-i16x8 swizzle result type (this feature should
probably be removed anyway).
Tested with both wasmtime and cg_clif.
This enables the object backend for s390x, in particular the
processing of all required relocations.
This uncovered a bug: we need to use PLT relocations for the
target of calls, which we currently do not. Fixed by adding
a new S390xPLTRel32Dbl reloc type and using it where needed.
Implement the tls_value for s390 in the ELF general-dynamic mode.
Notable differences to the x86_64 implementation are:
- We use a __tls_get_offset libcall instead of __tls_get_addr.
- The current thread pointer (stored in a pair of access registers)
needs to be added to the result of __tls_get_offset.
- __tls_get_offset has a variant ABI that requires the address of
the GOT (global offset table) is passed in %r12.
This means we need a new libcall entries for __tls_get_offset.
In addition, we also need a way to access _GLOBAL_OFFSET_TABLE_.
The latter is a "magic" symbol with a well-known name defined
by the ABI and recognized by the linker. This patch introduces
a new ExternalName::KnownSymbol variant to support such names
(originally due to @afonso360).
We also need to emit a relocation on a symbol placed in a
constant pool, as well as an extra relocation on the call
to __tls_get_offset required for TLS linker optimization.
Needed by the cg_clif frontend.
This adds full i128 support to the s390x target, including new filetests
and enabling the existing i128 runtest on s390x.
The ABI requires that i128 is passed and returned via implicit pointer,
but the front end still generates direct i128 types in call. This means
we have to implement ABI support to implicitly convert i128 types to
pointers when passing arguments.
To do so, we add a new variant ABIArg::ImplicitArg. This acts like
StructArg, except that the value type is the actual target type,
not a pointer type. The required conversions have to be inserted
in the prologue and at function call sites.
Note that when dereferencing the implicit pointer in the prologue,
we may require a temp register: the pointer may be passed on the
stack so it needs to be loaded first, but the value register may
be in the wrong class for pointer values. In this case, we use
the "stack limit" register, which should be available at this
point in the prologue.
For return values, we use a mechanism similar to the one used for
supporting multiple return values in the Wasmtime ABI. The only
difference is that the hidden pointer to the return buffer must
be the *first*, not last, argument in this case.
(This implements the second half of issue #4565.)
This adds support for StructArgument on s390x. The ABI for this
platform requires that the address of the buffer holding the copy
of the struct argument is passed from caller to callee as hidden
pointer, using a register or overflow stack slot.
To implement this, I've added an optional "pointer" filed to
ABIArg::StructArg, and code to handle the pointer both in common
abi_impl code and the s390x back-end.
One notable change necessary to make this work involved the
"copy_to_arg_order" mechanism. Currently, for struct args
we only need to copy the data (and that need to happen before
setting up any other args), while for non-struct args we only
need to set up the appropriate registers or stack slots.
This order is ensured by sorting the arguments appropriately
into a "copy_to_arg_order" list.
However, for struct args with explicit pointers we need to *both*
copy the data (again, before everything else), *and* set up a
register or stack slot. Since we now need to touch the argument
twice, we cannot solve the ordering problem by a simple sort.
Instead, the abi_impl common code now provided *two* callbacks,
emit_copy_regs_to_buffer and emit_copy_regs_to_arg, and expects
the back end to first call copy..to_buffer for all args, and
then call copy.._to_arg for all args. This required updates
to all back ends.
In the s390x back end, in addition to the new ABI code, I'm now
adding code to actually copy the struct data, using the MVC
instruction (for small buffers) or a memcpy libcall (for larger
buffers). This also requires a bit of new infrastructure:
- MVC is the first memory-to-memory instruction we use, which
needed a bit of memory argument tweaking
- We also need to set up the infrastructure to emit libcalls.
(This implements the first half of issue #4565.)
* Cranelift: Add instructions for getting the current stack/frame pointers and return address
This is the initial part of https://github.com/bytecodealliance/wasmtime/issues/4535
* x64: Remove `Amode::RbpOffset` and use `Amode::ImmReg` instead
We just special case getting operands from `Amode`s now.
* Fix s390x `get_return_address`; require `preserve_frame_pointers=true`
* Assert that `Amode::ImmRegRegShift` doesn't use rbp/rsp
* Handle non-allocatable registers in Amode::with_allocs
* Use "stack" instead of "r15" on s390x
* r14 is an allocatable register on s390x, so it shouldn't be used with `MovPReg`
* Cranellift: remove Baldrdash support and related features.
As noted in Mozilla's bugzilla bug 1781425 [1], the SpiderMonkey team
has recently determined that their current form of integration with
Cranelift is too hard to maintain, and they have chosen to remove it
from their codebase. If and when they decide to build updated support
for Cranelift, they will adopt different approaches to several details
of the integration.
In the meantime, after discussion with the SpiderMonkey folks, they
agree that it makes sense to remove the bits of Cranelift that exist
to support the integration ("Baldrdash"), as they will not need
them. Many of these bits are difficult-to-maintain special cases that
are not actually tested in Cranelift proper: for example, the
Baldrdash integration required Cranelift to emit function bodies
without prologues/epilogues, and instead communicate very precise
information about the expected frame size and layout, then stitched
together something post-facto. This was brittle and caused a lot of
incidental complexity ("fallthrough returns", the resulting special
logic in block-ordering); this is just one example. As another
example, one particular Baldrdash ABI variant processed stack args in
reverse order, so our ABI code had to support both traversal
orders. We had a number of other Baldrdash-specific settings as well
that did various special things.
This PR removes Baldrdash ABI support, the `fallthrough_return`
instruction, and pulls some threads to remove now-unused bits as a
result of those two, with the understanding that the SpiderMonkey folks
will build new functionality as needed in the future and we can perhaps
find cleaner abstractions to make it all work.
[1] https://bugzilla.mozilla.org/show_bug.cgi?id=1781425
* Review feedback.
* Fix (?) DWARF debug tests: add `--disable-cache` to wasmtime invocations.
The debugger tests invoke `wasmtime` from within each test case under
the control of a debugger (gdb or lldb). Some of these tests started to
inexplicably fail in CI with unrelated changes, and the failures were
only inconsistently reproducible locally. It seems to be cache related:
if we disable cached compilation on the nested `wasmtime` invocations,
the tests consistently pass.
* Review feedback.
This adds full support for all Cranelift SIMD instructions
to the s390x target. Everything is matched fully via ISLE.
In addition to adding support for many new instructions,
and the lower.isle code to match all SIMD IR patterns,
this patch also adds ABI support for vector types.
In particular, we now need to handle the fact that
vector registers 8 .. 15 are partially callee-saved,
i.e. the high parts of those registers (which correspond
to the old floating-poing registers) are callee-saved,
but the low parts are not. This is the exact same situation
that we already have on AArch64, and so this patch uses the
same solution (the is_included_in_clobbers callback).
The bulk of the changes are platform-specific, but there are
a few exceptions:
- Added ISLE extractors for the Immediate and Constant types,
to enable matching the vconst and swizzle instructions.
- Added a missing accessor for call_conv to ABISig.
- Fixed endian conversion for vector types in data_value.rs
to enable their use in runtests on the big-endian platforms.
- Enabled (nearly) all SIMD runtests on s390x. [ Two test cases
remain disabled due to vector shift count semantics, see below. ]
- Enabled all Wasmtime SIMD tests on s390x.
There are three minor issues, called out via FIXMEs below,
which should be addressed in the future, but should not be
blockers to getting this patch merged. I've opened the
following issues to track them:
- Vector shift count semantics
https://github.com/bytecodealliance/wasmtime/issues/4424
- is_included_in_clobbers vs. link register
https://github.com/bytecodealliance/wasmtime/issues/4425
- gen_constant callback
https://github.com/bytecodealliance/wasmtime/issues/4426
All tests, including all newly enabled SIMD tests, pass
on both z14 and z15 architectures.
This defines the full set of 32 128-bit vector registers on s390x.
(Note that the VRs overlap the existing FPRs.) In addition, this
adds support to use all 32 vector registers to implement floating-
point operations, by using vector floating-point instructions with
the 'W' bit set to operate only on the first element.
This part of the vector instruction set mostly matches the old FP
instruction set, with two exceptions:
- There is no vector version of the COPY SIGN instruction. Instead,
now use a VECTOR SELECT with an appropriate bit mask to implement
the fcopysign operation.
- There are no vector version of the float <-> int conversion
instructions where source and target differ in bit size. Use
appropriate multiple conversion steps instead. This also requires
use of explicit checking to implement correct overflow handling.
As a side effect, this version now also implements the i8 / i16
variants of all conversions, which had been missing so far.
For all operations except those two above, we continue to use the
old FP instruction if applicable (i.e. if all operands happen to
have been allocated to the original FP register set), and use the
vector instruction otherwise.
* Remove unused srcloc in MachReloc
* Remove unused srcloc in MachTrap
* Use `into_iter` on array in bench code to suppress a warning
* Remove unused srcloc in MachCallSite
Current codegen had a number of logic errors confusing
NAND with AND WITH COMPLEMENT, and NOR with OR WITH COMPLEMENT.
Add support for the missing z15 instructions and fix logic.
This PR switches Cranelift over to the new register allocator, regalloc2.
See [this document](https://gist.github.com/cfallin/08553421a91f150254fe878f67301801)
for a summary of the design changes. This switchover has implications for
core VCode/MachInst types and the lowering pass.
Overall, this change brings improvements to both compile time and speed of
generated code (runtime), as reported in #3942:
```
Benchmark Compilation (wallclock) Execution (wallclock)
blake3-scalar 25% faster 28% faster
blake3-simd no diff no diff
meshoptimizer 19% faster 17% faster
pulldown-cmark 17% faster no diff
bz2 15% faster no diff
SpiderMonkey, 21% faster 2% faster
fib(30)
clang.wasm 42% faster N/A
```
This adds support for all atomic operations that were unimplemented
so far in the s390x back end:
- atomic_rmw operations xchg, nand, smin, smax, umin, umax
- $I8 and $I16 versions of atomic_rmw and atomic_cas
- little endian versions of atomic_rmw and atomic_cas
All of these have to be implemented by a compare-and-swap loop;
and for the $I8 and $I16 versions the actual atomic instruction
needs to operate on the surrounding aligned 32-bit word.
Since we cannot emit new control flow during ISLE instruction
selection, these compare-and-swap loops are emitted as a single
meta-instruction to be expanded at emit time.
However, since there is a large number of different versions of
the loop required to implement all the above operations, I've
implemented a facility to allow specifying the loop bodies
from within ISLE after all, by creating a vector of MInst
structures that will be emitted as part of the meta-instruction.
There are still restrictions, in particular instructions that
are part of the loop body may not modify any virtual register.
But even so, this approach looks preferable to doing everything
in emit.rs.
A few instructions needed in those compare-and-swap loop bodies
were added as well, in particular the RxSBG family of instructions
as well as the LOAD REVERSED in-register byte-swap instructions.
This patch also adds filetest runtests to verify the semantics
of all operations, in particular the subword and little-endian
variants (those are currently only executed on s390x).
The BranchTarget abstraction is no longer needed, since all branches are
being emitted using a MachLabel target. Remove BranchTarget and simply
use MachLabel everywhere a branch target is required. (This brings the
s390x back-end in line with what x64 does as well.)
In addition, simplify jumptable emission by moving all instructions
that do not depend on the internal label (i.e. the conditional branch
to the default label, as well as the scaling the index register) out of
the combined JTSequence instruction.
This refactoring will make moving branch generation to ISLE easier.
In preparing the back-end to move to ISLE, I detected a
number of codegen bugs in the existing code, which are
fixed here:
- Fix internal compiler error with uload16/icmp corner case.
- Fix broken Cls lowering.
- Correctly mask shift count for i8/i16 shifts.
In addition, I made several changes to operand encodings
in various MInst patterns. These should not have any
functional effect, but will make the ISLE migration easier:
- Encode floating-point constants as u32/u64 in MInst patterns.
- Encode shift amounts as u8 and Reg in ShiftOp pattern.
- Use MemArg in LoadMultiple64 and StoreMultiple64 patterns.
* Support full set of ADD LOGICAL / SUBTRACT LOGICAL instructions
* Full implementation of IaddIfcout lowering
* Enable most memory64 tests (except simd and threads)
Cranelift crates have historically been much more verbose with debug-level
logging than most other crates in the Rust ecosystem. We log things like how
many parameters a basic block has, the color of virtual registers during
regalloc, etc. Even for Cranelift hackers, these things are largely only useful
when hacking specifically on Cranelift and looking at a particular test case,
not even when using some Cranelift embedding (such as Wasmtime).
Most of the time, when people want logging for their Rust programs, they do
something like:
RUST_LOG=debug cargo run
This means that they get all that mostly not useful debug logging out of
Cranelift. So they might want to disable logging for Cranelift, or change it to
a higher log level:
RUST_LOG=debug,cranelift=info cargo run
The problem is that this is already more annoying to type that `RUST_LOG=debug`,
and that Cranelift isn't one single crate, so you actually have to play
whack-a-mole with naming all the Cranelift crates off the top of your head,
something more like this:
RUST_LOG=debug,cranelift=info,cranelift_codegen=info,cranelift_wasm=info,...
Therefore, we're changing most of the `debug!` logs into `trace!` logs: anything
that is very Cranelift-internal, unlikely to be useful/meaningful to the
"average" Cranelift embedder, or prints a message for each instruction visited
during a pass. On the other hand, things that just report a one line statistic
for a whole pass, for example, are left as `debug!`. The more verbose the log
messages are, the higher the bar they must clear to be `debug!` rather than
`trace!`.
* Add support for processor features (including auto-detection).
* Move base architecture set requirement back to z14.
* Add z15 feature sets and re-enable z15-specific code generation
when required features are available.
This adds full back-end support for the Fence, AtomicLoad
and AtomicStore operations, and partial support for the
AtomicCas and AtomicRmw operations.
The missing pieces include sub-word operations, operations
on little-endian memory requiring byte-swapping, and some
of the subtypes of AtomicRmw -- everything that cannot be
implemented without a compare-and-swap loop. This will be
done in a follow-up patch.
This patch already suffices to make the test suite green
again after a recent change that now requires atomic
operations when accessing the heap.
This adds support for the IBM z/Architecture (s390x-ibm-linux).
The status of the s390x backend in its current form is:
- Wasmtime is fully functional and passes all tests on s390x.
- All back-end features supported, with the exception of SIMD.
- There is still a lot of potential for performance improvements.
- Currently the only supported processor type is z15.
