`funcref`s are implemented as `NonNull<VMCallerCheckedAnyfunc>`.
This should be more efficient than using a `VMExternRef` that points at a
`VMCallerCheckedAnyfunc` because it gets rid of an indirection, dynamic
allocation, and some reference counting.
Note that the null function reference is *NOT* a null pointer; it is a
`VMCallerCheckedAnyfunc` that has a null `func_ptr` member.
Part of #929
For host VM code, we use plain reference counting, where cloning increments
the reference count, and dropping decrements it. We can avoid many of the
on-stack increment/decrement operations that typically plague the
performance of reference counting via Rust's ownership and borrowing system.
Moving a `VMExternRef` avoids mutating its reference count, and borrowing it
either avoids the reference count increment or delays it until if/when the
`VMExternRef` is cloned.
When passing a `VMExternRef` into compiled Wasm code, we don't want to do
reference count mutations for every compiled `local.{get,set}`, nor for
every function call. Therefore, we use a variation of **deferred reference
counting**, where we only mutate reference counts when storing
`VMExternRef`s somewhere that outlives the activation: into a global or
table. Simultaneously, we over-approximate the set of `VMExternRef`s that
are inside Wasm function activations. Periodically, we walk the stack at GC
safe points, and use stack map information to precisely identify the set of
`VMExternRef`s inside Wasm activations. Then we take the difference between
this precise set and our over-approximation, and decrement the reference
count for each of the `VMExternRef`s that are in our over-approximation but
not in the precise set. Finally, the over-approximation is replaced with the
precise set.
The `VMExternRefActivationsTable` implements the over-approximized set of
`VMExternRef`s referenced by Wasm activations. Calling a Wasm function and
passing it a `VMExternRef` moves the `VMExternRef` into the table, and the
compiled Wasm function logically "borrows" the `VMExternRef` from the
table. Similarly, `global.get` and `table.get` operations clone the gotten
`VMExternRef` into the `VMExternRefActivationsTable` and then "borrow" the
reference out of the table.
When a `VMExternRef` is returned to host code from a Wasm function, the host
increments the reference count (because the reference is logically
"borrowed" from the `VMExternRefActivationsTable` and the reference count
from the table will be dropped at the next GC).
For more general information on deferred reference counting, see *An
Examination of Deferred Reference Counting and Cycle Detection* by Quinane:
https://openresearch-repository.anu.edu.au/bitstream/1885/42030/2/hon-thesis.pdf
cc #929Fixes#1804
This is enough to get an `externref -> externref` identity function
passing.
However, `externref`s that are dropped by compiled Wasm code are (safely)
leaked. Follow up work will leverage cranelift's stack maps to resolve this
issue.
In the `ModuleEnvironment::declare_signature` callback, also pass the original
Wasm function signature, so that consumers may associate this information with
each compiled function. This is often necessary because while each Wasm
signature gets compiled down into a single native signature, multiple Wasm
signatures might compile down into the same native signature, and in these cases
the original Wasm signature is required for dynamic type checking of calls.
* Implement interrupting wasm code, reimplement stack overflow
This commit is a relatively large change for wasmtime with two main
goals:
* Primarily this enables interrupting executing wasm code with a trap,
preventing infinite loops in wasm code. Note that resumption of the
wasm code is not a goal of this commit.
* Additionally this commit reimplements how we handle stack overflow to
ensure that host functions always have a reasonable amount of stack to
run on. This fixes an issue where we might longjmp out of a host
function, skipping destructors.
Lots of various odds and ends end up falling out in this commit once the
two goals above were implemented. The strategy for implementing this was
also lifted from Spidermonkey and existing functionality inside of
Cranelift. I've tried to write up thorough documentation of how this all
works in `crates/environ/src/cranelift.rs` where gnarly-ish bits are.
A brief summary of how this works is that each function and each loop
header now checks to see if they're interrupted. Interrupts and the
stack overflow check are actually folded into one now, where function
headers check to see if they've run out of stack and the sentinel value
used to indicate an interrupt, checked in loop headers, tricks functions
into thinking they're out of stack. An interrupt is basically just
writing a value to a location which is read by JIT code.
When interrupts are delivered and what triggers them has been left up to
embedders of the `wasmtime` crate. The `wasmtime::Store` type has a
method to acquire an `InterruptHandle`, where `InterruptHandle` is a
`Send` and `Sync` type which can travel to other threads (or perhaps
even a signal handler) to get notified from. It's intended that this
provides a good degree of flexibility when interrupting wasm code. Note
though that this does have a large caveat where interrupts don't work
when you're interrupting host code, so if you've got a host import
blocking for a long time an interrupt won't actually be received until
the wasm starts running again.
Some fallout included from this change is:
* Unix signal handlers are no longer registered with `SA_ONSTACK`.
Instead they run on the native stack the thread was already using.
This is possible since stack overflow isn't handled by hitting the
guard page, but rather it's explicitly checked for in wasm now. Native
stack overflow will continue to abort the process as usual.
* Unix sigaltstack management is now no longer necessary since we don't
use it any more.
* Windows no longer has any need to reset guard pages since we no longer
try to recover from faults on guard pages.
* On all targets probestack intrinsics are disabled since we use a
different mechanism for catching stack overflow.
* The C API has been updated with interrupts handles. An example has
also been added which shows off how to interrupt a module.
Closes#139Closes#860Closes#900
* Update comment about magical interrupt value
* Store stack limit as a global value, not a closure
* Run rustfmt
* Handle review comments
* Add a comment about SA_ONSTACK
* Use `usize` for type of `INTERRUPTED`
* Parse human-readable durations
* Bring back sigaltstack handling
Allows libstd to print out stack overflow on failure still.
* Add parsing and emission of stack limit-via-preamble
* Fix new example for new apis
* Fix host segfault test in release mode
* Fix new doc example
* Compute instance exports on demand.
Instead having instances eagerly compute a Vec of Externs, and bumping
the refcount for each Extern, compute Externs on demand.
This also enables `Instance::get_export` to avoid doing a linear search.
This also means that the closure returned by `get0` and friends now
holds an `InstanceHandle` to dynamically hold the instance live rather
than being scoped to a lifetime.
* Compute module imports and exports on demand too.
And compute Extern::ty on demand too.
* Add a utility function for computing an ExternType.
* Add a utility function for looking up a function's signature.
* Add a utility function for computing the ValType of a Global.
* Rename wasmtime_environ::Export to EntityIndex.
This helps differentiate it from other Export types in the tree, and
describes what it is.
* Fix a typo in a comment.
* Simplify module imports and exports.
* Make `Instance::exports` return the export names.
This significantly simplifies the public API, as it's relatively common
to need the names, and this avoids the need to do a zip with
`Module::exports`.
This also changes `ImportType` and `ExportType` to have public members
instead of private members and accessors, as I find that simplifies the
usage particularly in cases where there are temporary instances.
* Remove `Instance::module`.
This doesn't quite remove `Instance`'s `module` member, it gets a step
closer.
* Use a InstanceHandle utility function.
* Don't consume self in the `Func::get*` methods.
Instead, just create a closure containing the instance handle and the
export for them to call.
* Use `ExactSizeIterator` to avoid needing separate `num_*` methods.
* Rename `Extern::func()` etc. to `into_func()` etc.
* Revise examples to avoid using `nth`.
* Add convenience methods to instance for getting specific extern types.
* Use the convenience functions in more tests and examples.
* Avoid cloning strings for `ImportType` and `ExportType`.
* Remove more obviated clone() calls.
* Simplify `Func`'s closure state.
* Make wasmtime::Export's fields private.
This makes them more consistent with ExportType.
* Fix compilation error.
* Make a lifetime parameter explicit, and use better lifetime names.
Instead of 'me, use 'instance and 'module to make it clear what the
lifetime is.
* More lifetime cleanups.
* wasmtime: Pass around more contexts instead of fields
This commit refactors some wasmtime internals to pass around more
context-style structures rather than individual fields of each
structure. The intention here is to make the addition of fields to a
structure easier to plumb throughout the internals of wasmtime.
Currently you need to edit lots of functions to pass lots of parameters,
but ideally after this you'll only need to edit one or two struct fields
and then relevant locations have access to the information already.
Updates in this commit are:
* `debug_info` configuration is now folded into `Tunables`. Additionally
a `wasmtime::Config` now holds a `Tunables` directly and is passed
into an internal `Compiler`. Eventually this should allow for direct
configuration of the `Tunables` attributes from the `wasmtime` API,
but no new configuration is exposed at this time.
* `ModuleTranslation` is now passed around as a whole rather than
passing individual components to allow access to all the fields,
including `Tunables`.
This was motivated by investigating what it would take to optionally
allow loops and such to get interrupted, but that sort of codegen
setting was currently relatively difficult to plumb all the way through
and now it's hoped to be largely just an addition to `Tunables`.
* Fix lightbeam compile
* Store module name on `wasmtime_environ::Module`
This keeps all name information in one place so we dont' have to keep
extra structures around in `wasmtime::Module`.
* rustfmt
* Enable the already-passing `bulk-memoryoperations/imports.wast` test
* Implement support for the `memory.init` instruction and passive data
This adds support for passive data segments and the `memory.init` instruction
from the bulk memory operations proposal. Passive data segments are stored on
the Wasm module and then `memory.init` instructions copy their contents into
memory.
* Implement the `data.drop` instruction
This allows wasm modules to deallocate passive data segments that it doesn't
need anymore. We keep track of which segments have not been dropped on an
`Instance` and when dropping them, remove the entry from the instance's hash
map. The module always needs all of the segments for new instantiations.
* Enable final bulk memory operations spec test
This requires special casing an expected error message for an `assert_trap`,
since the expected error message contains the index of an uninitialized table
element, but our trap implementation doesn't save that diagnostic information
and shepherd it out.
* rename PassiveElemIndex to ElemIndex and same for PassiveDataIndex (#1411)
* rename PassiveDataIndex to DataIndex
* rename PassiveElemIndex to ElemIndex
* Apply renamings to wasmtime as well
* Run rustfmt
Co-authored-by: csmoe <csmoe@msn.com>
This adds support for the `table.copy` instruction from the bulk memory
proposal. It also supports multiple tables, which were introduced by the
reference types proposal.
Part of #928
* Improve robustness of cache loading/storing
Today wasmtime incorrectly loads compiled compiled modules from the
global cache when toggling settings such as optimizations. For example
if you execute `wasmtime foo.wasm` that will cache globally an
unoptimized version of the wasm module. If you then execute `wasmtime -O
foo.wasm` it would then reload the unoptimized version from cache, not
realizing the compilation settings were different, and use that instead.
This can lead to very surprising behavior naturally!
This commit updates how the cache is managed in an attempt to make it
much more robust against these sorts of issues. This takes a leaf out of
rustc's playbook and models the cache with a function that looks like:
fn load<T: Hash>(
&self,
data: T,
compute: fn(T) -> CacheEntry,
) -> CacheEntry;
The goal here is that it guarantees that all the `data` necessary to
`compute` the result of the cache entry is hashable and stored into the
hash key entry. This was previously open-coded and manually managed
where items were hashed explicitly, but this construction guarantees
that everything reasonable `compute` could use to compile the module is
stored in `data`, which is itself hashable.
This refactoring then resulted in a few workarounds and a few fixes,
including the original issue:
* The `Module` type was split into `Module` and `ModuleLocal` where only
the latter is hashed. The previous hash function for a `Module` left
out items like the `start_func` and didn't hash items like the imports
of the module. Omitting the `start_func` was fine since compilation
didn't actually use it, but omitting imports seemed uncomfortable
because while compilation didn't use the import values it did use the
*number* of imports, which seems like it should then be put into the
cache key. The `ModuleLocal` type now derives `Hash` to guarantee that
all of its contents affect the hash key.
* The `ModuleTranslationState` from `cranelift-wasm` doesn't implement
`Hash` which means that we have a manual wrapper to work around that.
This will be fixed with an upstream implementation, since this state
affects the generated wasm code. Currently this is just a map of
signatures, which is present in `Module` anyway, so we should be good
for the time being.
* Hashing `dyn TargetIsa` was also added, where previously it was not
fully hashed. Previously only the target name was used as part of the
cache key, but crucially the flags of compilation were omitted (for
example the optimization flags). Unfortunately the trait object itself
is not hashable so we still have to manually write a wrapper to hash
it, but we likely want to add upstream some utilities to hash isa
objects into cranelift itself. For now though we can continue to add
hashed fields as necessary.
Overall the goal here was to use the compiler to expose what we're not
hashing, and then make sure we organize data and write the right code to
ensure everything is hashed, and nothing more.
* Update crates/environ/src/module.rs
Co-Authored-By: Peter Huene <peterhuene@protonmail.com>
* Fix lightbeam
* Fix compilation of tests
* Update the expected structure of the cache
* Revert "Update the expected structure of the cache"
This reverts commit 2b53fee426a4e411c313d8c1e424841ba304a9cd.
* Separate the cache dir a bit
* Add a test the cache is busted with opt levels
* rustfmt
Co-authored-by: Peter Huene <peterhuene@protonmail.com>
* Improve handling of strings for backtraces
Largely avoid storing strings at all in the `wasmtime-*` internal
crates, and instead only store strings in a separate global cache
specific to the `wasmtime` crate itself. This global cache is inserted
and removed from dynamically as modules are created and deallocated, and
the global cache is consulted whenever a `Trap` is created to
symbolicate any wasm frames.
This also avoids the need to thread `module_name` through the jit crates
and back, and additionally removes the need for `ModuleSyncString`.
* Run rustfmt
* Replace the global-exports mechanism with a caller-vmctx mechanism.
This eliminates the global exports mechanism, and instead adds a
caller-vmctx argument to wasm functions so that WASI can obtain the
memory and other things from the caller rather than looking them up in a
global registry.
This replaces #390.
* Fixup some merge conflicts
* Rustfmt
* Ensure VMContext is aligned to 16 bytes
With the removal of `global_exports` it "just so happens" that this
isn't happening naturally any more.
* Fixup some bugs with double vmctx in wasmtime crate
* Trampoline stub needed adjusting
* Use pointer type instead of always using I64 for caller vmctx
* Don't store `ir::Signature` in `Func` since we don't know the pointer
size at creation time.
* Skip the first 2 arguments in IR signatures since that's the two vmctx
parameters.
* Update cranelift to 0.56.0
* Handle more merge conflicts
* Rustfmt
Co-authored-by: Alex Crichton <alex@alexcrichton.com>
This commit fixes the `wasmtime::Instance` instantiation API when
imports have the same name but might be imported under different types.
This is handled in the API by listing imports as a list instead of as a
name map, but they were interpreted as a name map under the hood causing
collisions.
This commit now keeps track of the index used to define each import, and
the index is passed through in the `Resolver`. Existing implementaitons
of `Resolver` all ignore this, but the API now uses it exclusivley to
match up `Extern` definitions to imports.
* Add unimplemented stubs for Cranelift interfaces
Cranelift changes to FuncEnvironment, TargetEnvironment, and GlobalInit (see https://github.com/bytecodealliance/cranelift/pull/1073) require these changes to compile wasmtime.
* Upgrade Cranelift to 0.52.0
* Migrate back to `std::` stylistically
This commit moves away from idioms such as `alloc::` and `core::` as
imports of standard data structures and types. Instead it migrates all
crates to uniformly use `std::` for importing standard data structures
and types. This also removes the `std` and `core` features from all
crates to and removes any conditional checking for `feature = "std"`
All of this support was previously added in #407 in an effort to make
wasmtime/cranelift "`no_std` compatible". Unfortunately though this
change comes at a cost:
* The usage of `alloc` and `core` isn't idiomatic. Especially trying to
dual between types like `HashMap` from `std` as well as from
`hashbrown` causes imports to be surprising in some cases.
* Unfortunately there was no CI check that crates were `no_std`, so none
of them actually were. Many crates still imported from `std` or
depended on crates that used `std`.
It's important to note, however, that **this does not mean that wasmtime
will not run in embedded environments**. The style of the code today and
idioms aren't ready in Rust to support this degree of multiplexing and
makes it somewhat difficult to keep up with the style of `wasmtime`.
Instead it's intended that embedded runtime support will be added as
necessary. Currently only `std` is necessary to build `wasmtime`, and
platforms that natively need to execute `wasmtime` will need to use a
Rust target that supports `std`. Note though that not all of `std` needs
to be supported, but instead much of it could be configured off to
return errors, and `wasmtime` would be configured to gracefully handle
errors.
The goal of this PR is to move `wasmtime` back to idiomatic usage of
features/`std`/imports/etc and help development in the short-term.
Long-term when platform concerns arise (if any) they can be addressed by
moving back to `no_std` crates (but fixing the issues mentioned above)
or ensuring that the target in Rust has `std` available.
* Start filling out platform support doc
