* cranelift: Test Forward branching
* fuzzgen: Separate terminators
* fuzzgen: Avoid generating jumptables if we have no valid targets
* fuzzgen: Forward Jump Tables
* fuzzgen: Cleanup some feedback
Thanks @jameysharp!
* fuzzgen: Cleanup block generation
Thanks @jameysharp!
* fuzzgen: Style Cleanups
These were accidentally reverted in a rebase
* fuzzgen: Prevent block0 from being targeted for branches
* fuzzgen: Add jump tables sorting TODO
* Improve panic message if typevar_operand is None
* cranelift-fuzzgen: Don't allocate for each choice
I don't think the performance of test-case generation is at all
important here. I'm actually doing this in preparation for a bigger
refactor where I want to be able to borrow the list of valid choices for
a given opcode without worrying about lifetimes.
* cranelift-fuzzgen: Remove next_func_index
It's only used locally within `generate_funcrefs`, so it doesn't need to
be in the FunctionBuilder struct.
Also there's already a local counter that I think is good enough for
this. As far as I know, the function indexes only need to be distinct,
not contiguous.
* cranelift-fuzzgen: Separate resources from config
The function-global variables, blocks, etc that are generated before
generating instructions are all owned collections without any lifetime
parameters. By contrast, the Unstructured and Config are both borrowed.
Separating them will make it easier to borrow from the owned resources.
* cranelift: Remove of/nof overflow flags from icmp
Neither Wasmtime nor cg-clif use these flags under any circumstances.
From discussion on #3060 I see it's long been unclear what purpose these
flags served.
Fixes#3060, fixes#4406, and fixes #4875... by deleting all the code
that could have been buggy.
This changes the cranelift-fuzzgen input format by removing some IntCC
options, so I've gone ahead and enabled I128 icmp tests at the same
time. Since only the of/nof cases were failing before, I expect these to
work.
* Restore trapif tests
It's still useful to validate that iadd_ifcout's iflags result can be
forwarded correctly to trapif, and for that purpose it doesn't really
matter what condition code is checked.
* cranelift: Add assert to prevent wrong InstFormat being used for the wrong opcode
* cranelift: Use correct instruction format when inserting opcodes in fuzzgen (fixes#4733)
* cranelift: Use debug assert on InstFormat assert
This is the implementation of https://github.com/bytecodealliance/wasmtime/issues/4155, using the "inverted API" approach suggested by @cfallin (thanks!) in Cranelift, and trait object to provide a backend for an all-included experience in Wasmtime.
After the suggestion of Chris, `Function` has been split into mostly two parts:
- on the one hand, `FunctionStencil` contains all the fields required during compilation, and that act as a compilation cache key: if two function stencils are the same, then the result of their compilation (`CompiledCodeBase<Stencil>`) will be the same. This makes caching trivial, as the only thing to cache is the `FunctionStencil`.
- on the other hand, `FunctionParameters` contain the... function parameters that are required to finalize the result of compilation into a `CompiledCode` (aka `CompiledCodeBase<Final>`) with proper final relocations etc., by applying fixups and so on.
Most changes are here to accomodate those requirements, in particular that `FunctionStencil` should be `Hash`able to be used as a key in the cache:
- most source locations are now relative to a base source location in the function, and as such they're encoded as `RelSourceLoc` in the `FunctionStencil`. This required changes so that there's no need to explicitly mark a `SourceLoc` as the base source location, it's automatically detected instead the first time a non-default `SourceLoc` is set.
- user-defined external names in the `FunctionStencil` (aka before this patch `ExternalName::User { namespace, index }`) are now references into an external table of `UserExternalNameRef -> UserExternalName`, present in the `FunctionParameters`, and must be explicitly declared using `Function::declare_imported_user_function`.
- some refactorings have been made for function names:
- `ExternalName` was used as the type for a `Function`'s name; while it thus allowed `ExternalName::Libcall` in this place, this would have been quite confusing to use it there. Instead, a new enum `UserFuncName` is introduced for this name, that's either a user-defined function name (the above `UserExternalName`) or a test case name.
- The future of `ExternalName` is likely to become a full reference into the `FunctionParameters`'s mapping, instead of being "either a handle for user-defined external names, or the thing itself for other variants". I'm running out of time to do this, and this is not trivial as it implies touching ISLE which I'm less familiar with.
The cache computes a sha256 hash of the `FunctionStencil`, and uses this as the cache key. No equality check (using `PartialEq`) is performed in addition to the hash being the same, as we hope that this is sufficient data to avoid collisions.
A basic fuzz target has been introduced that tries to do the bare minimum:
- check that a function successfully compiled and cached will be also successfully reloaded from the cache, and returns the exact same function.
- check that a trivial modification in the external mapping of `UserExternalNameRef -> UserExternalName` hits the cache, and that other modifications don't hit the cache.
- This last check is less efficient and less likely to happen, so probably should be rethought a bit.
Thanks to both @alexcrichton and @cfallin for your very useful feedback on Zulip.
Some numbers show that for a large wasm module we're using internally, this is a 20% compile-time speedup, because so many `FunctionStencil`s are the same, even within a single module. For a group of modules that have a lot of code in common, we get hit rates up to 70% when they're used together. When a single function changes in a wasm module, every other function is reloaded; that's still slower than I expect (between 10% and 50% of the overall compile time), so there's likely room for improvement.
Fixes#4155.
* cranelift: Remove shifts-small-types runtests
These were moved to the main shifts file in #4519 but this file was accidentaly left in tree.
It also fixes the missing sshr_i8_i8 testcase
* cranelift: Add shifts to fuzzer
* cranelift: Add extends to fuzzer
* cranelift: Use JIT in runtests
Using `cranelift-jit` in run tests allows us to preform relocations and
libcalls. This is important since some instruction lowerings fallback
to libcall's when an extension is missing, or when it's too complicated
to implement manually.
This is also a first step to being able to test `call`'s between functions
in the runtest suite. It should also make it easier to eventually test
TLS relocations, symbol resolution and ABI's.
Another benefit of this is that we also get to test the JIT more, since
it now runs the runtests, and gets some fuzzing via `fuzzgen` (which
uses the `SingleFunctionCompiler`).
This change causes regressions in terms of runtime for the filetests.
I haven't done any serious benchmarking but what I've been seeing is
that it now takes about ~3 seconds to run the testsuite while it
previously took around 2 seconds.
* Add FMA tests for X86
* fuzzgen: Use Switch interface
Turns out this is an interface that the frontend provides.
We should fuzz it.
* cranelift: Restrict index range in Switch emission on fuzzgen
* cranelift: Restrict `br_table` to `i32` indices
In #4498 it was proposed that we should only accept `i32` indices
to `br_table`. The rationale for this is that larger types lead the
users to a false sense of flexibility (since we don't support jump
tables larger than u32's), and narrower types are not well tested
paths that would be safer if we removed them.
* cranelift: Reduce directly from i128 to i32 in Switch
* fuzzgen: Add float support
Add support for generating floats and some float instructions.
* fuzzgen: Enable NaN Canonicalization
Both IEEE754 and the Wasm spec are somewhat loose about what is allowed
to be returned from NaN producing operations. And in practice this changes
from X86 to Aarch64 and others. Even in the same host machine, the
interpreter may produce a code sequence different from cranelift that
generates different NaN's but produces legal results according to the spec.
These differences cause spurious failures in the fuzzer. To fix this
we enable the NaN Canonicalization pass that replaces any NaN's produced
with a single fixed canonical NaN value.
* fuzzgen: Use `MultiAry` when inserting opcodes
This deduplicates a few inserters!
* cranelift: Initial fuzzer implementation
* cranelift: Generate multiple test cases in fuzzer
* cranelift: Separate function generator in fuzzer
* cranelift: Insert random instructions in fuzzer
* cranelift: Rename gen_testcase
* cranelift: Implement div for unsigned values in interpreter
* cranelift: Run all test cases in fuzzer
* cranelift: Comment options in function_runner
* cranelift: Improve fuzzgen README.md
* cranelift: Fuzzgen remove unused variable
* cranelift: Fuzzer code style fixes
Thanks! @bjorn3
* cranelift: Fix nits in CLIF fuzzer
Thanks @cfallin!
* cranelift: Implement Arbitrary for TestCase
* cranelift: Remove gen_testcase
* cranelift: Move fuzzers to wasmtime fuzz directory
* cranelift: CLIF-Fuzzer ignore tests that produce traps
* cranelift: CLIF-Fuzzer create new fuzz target to validate generated testcases
* cranelift: Store clif-fuzzer config in a separate struct
* cranelift: Generate variables upfront per function
* cranelift: Prevent publishing of fuzzgen crate
