Given a clif function, harvest all its integer subexpressions, so that they can
be fed into [Souper](https://github.com/google/souper) as candidates for
superoptimization. For some of these candidates, Souper will successfully
synthesize a right-hand side that is equivalent but has lower cost than the
left-hand side. Then, we can combine these left- and right-hand sides into a
complete optimization, and add it to our peephole passes.
To harvest the expression that produced a given value `x`, we do a post-order
traversal of the dataflow graph starting from `x`. As we do this traversal, we
maintain a map from clif values to their translated Souper values. We stop
traversing when we reach anything that can't be translated into Souper IR: a
memory load, a float-to-int conversion, a block parameter, etc. For values
produced by these instructions, we create a Souper `var`, which is an input
variable to the optimization. For instructions that have a direct mapping into
Souper IR, we get the Souper version of each of its operands and then create the
Souper version of the instruction itself. It should now be clear why we do a
post-order traversal: we need an instruction's translated operands in order to
translate the instruction itself. Once this instruction is translated, we update
the clif-to-souper map with this new translation so that any other instruction
that uses this result as an operand has access to the translated value. When the
traversal is complete we return the translation of `x` as the root of left-hand
side candidate.
Adds support for addss and subss. This is the first lowering for
sse floating point alu and some move operations. The changes here do
some renaming of data structures and adds a couple of new ones
to support sse specific operations. The work done here will likely
evolve as needed to support an efficient, inituative, and consistent
framework.
This patch includes:
- A complete rework of the way that CLIF blocks and edge blocks are
lowered into VCode blocks. The new mechanism in `BlockLoweringOrder`
computes RPO over the CFG, but with a twist: it merges edge blocks intto
heads or tails of original CLIF blocks wherever possible, and it does
this without ever actually materializing the full nodes-plus-edges
graph first. The backend driver lowers blocks in final order so
there's no need to reshuffle later.
- A new `MachBuffer` that replaces the `MachSection`. This is a special
version of a code-sink that is far more than a humble `Vec<u8>`. In
particular, it keeps a record of label definitions and label uses,
with a machine-pluggable `LabelUse` trait that defines various types
of fixups (basically internal relocations).
Importantly, it implements some simple peephole-style branch rewrites
*inline in the emission pass*, without any separate traversals over
the code to use fallthroughs, swap taken/not-taken arms, etc. It
tracks branches at the tail of the buffer and can (i) remove blocks
that are just unconditional branches (by redirecting the label), (ii)
understand a conditional/unconditional pair and swap the conditional
polarity when it's helpful; and (iii) remove branches that branch to
the fallthrough PC.
The `MachBuffer` also implements branch-island support. On
architectures like AArch64, this is needed to allow conditional
branches within plausibly-attainable ranges (+/- 1MB on AArch64
specifically). It also does this inline while streaming through the
emission, without any sort of fixpoint algorithm or later moving of
code, by simply tracking outstanding references and "deadlines" and
emitting an island just-in-time when we're in danger of going out of
range.
- A rework of the instruction selector driver. This is largely following
the same algorithm as before, but is cleaned up significantly, in
particular in the API: the machine backend can ask for an input arg
and get any of three forms (constant, register, producing
instruction), indicating it needs the register or can merge the
constant or producing instruction as appropriate. This new driver
takes special care to emit constants right at use-sites (and at phi
inputs), minimizing their live-ranges, and also special-cases the
"pinned register" to avoid superfluous moves.
Overall, on `bz2.wasm`, the results are:
wasmtime full run (compile + runtime) of bz2:
baseline: 9774M insns, 9742M cycles, 3.918s
w/ changes: 7012M insns, 6888M cycles, 2.958s (24.5% faster, 28.3% fewer insns)
clif-util wasm compile bz2:
baseline: 2633M insns, 3278M cycles, 1.034s
w/ changes: 2366M insns, 2920M cycles, 0.923s (10.7% faster, 10.1% fewer insns)
All numbers are averages of two runs on an Ampere eMAG.
Rather than outright replacing parts of our existing peephole optimizations
passes, this makes peepmatic an optional cargo feature that can be enabled. This
allows us to take a conservative approach with enabling peepmatic everywhere,
while also allowing us to get it in-tree and make it easier to collaborate on
improving it quickly.
This ports all of the identity, no-op, simplification, and canonicalization
related optimizations over from being hand-coded to the `peepmatic` DSL. This
does not handle the branch-to-branch optimizations or most of the
divide-by-constant optimizations.
that only one value ever flows. Has been observed to improve generated code
run times by up to 8%. Compilation cost increases by about 0.6%, but up to 7%
total cost has been observed to be saved; iow it can be a significant win in
terms of compilation time, overall.
* Move most wasmtime tests into one test suite
This commit moves most wasmtime tests into a single test suite which
gets compiled into one executable instead of having lots of test
executables. The goal here is to reduce disk space on CI, and this
should be achieved by having fewer executables which means fewer copies
of `libwasmtime.rlib` linked across binaries on the system. More
importantly though this means that DWARF debug information should only
be in one executable rather than duplicated across many.
* Share more build caches
Globally set `RUSTFLAGS` to `-Dwarnings` instead of individually so all
build steps share the same value.
* Allow some dead code in cranelift-codegen
Prevents having to fix all warnings for all possible feature
combinations, only the main ones which come up.
* Update some debug file paths
- Undo temporary changes to default features (`all-arch`) and a
signal-handler test.
- Remove `SIGTRAP` handler: no longer needed now that we've found an
"undefined opcode" option on ARM64.
- Rename pp.rs to pretty_print.rs in machinst/.
- Only use empty stack-probe on non-x86. As per a comment in
rust-lang/compiler-builtins [1], LLVM only supports stack probes on
x86 and x86-64. Thus, on any other CPU architecture, we cannot refer
to `__rust_probestack`, because it does not exist.
- Rename arm64 to aarch64.
- Use `target` directive in vcode filetests.
- Run the flags verifier, but without encinfo, when using new backends.
- Clean up warning overrides.
- Fix up use of casts: use u32::from(x) and siblings when possible,
u32::try_from(x).unwrap() when not, to avoid silent truncation.
- Take immutable `Function` borrows as input; we don't actually
mutate the input IR.
- Lots of other miscellaneous cleanups.
[1] cae3e6ea23/src/probestack.rs (L39)
This patch adds the MachInst, or Machine Instruction, infrastructure.
This is the machine-independent portion of the new backend design. It
contains the implementation of the "vcode" (virtual-registerized code)
container, the top-level lowering algorithm and compilation pipeline,
and the trait definitions that the machine backends will fill in.
This backend infrastructure is included in the compilation of the
`codegen` crate, but it is not yet tied into the public APIs; that patch
will come last, after all the other pieces are filled in.
This patch contains code written by Julian Seward <jseward@acm.org> and
Benjamin Bouvier <public@benj.me>, originally developed on a side-branch
before rebasing and condensing into this patch series. See the `arm64`
branch at `https://github.com/cfallin/wasmtime` for original development
history.
Co-authored-by: Julian Seward <jseward@acm.org>
Co-authored-by: Benjamin Bouvier <public@benj.me>
* the target-lexicon crate no longer has or needs the std feature
in cargo, so we can delete all default-features=false, any mentions
of its std feature, and the nostd configs in many lib.rs files
* the representation of arm architectures has changed, so some case
statements needed refactoring
