One critical bit of plumbing was missing: the `StackMapSink` passed to
`compile_and_emit` was not actually receiving stackmaps. This seemingly
very basic issue was not caught because the other major user of reftype
support, SpiderMonkey, extracts stackmaps with a lower-level API. The
SM integration was built this way to avoid an awkward API quirk when
passing stackmaps through a `CodeSink` that proxies them to a
`StackMapSink`: the `CodeSink` wants `Value`s for each reference slot,
while the actual `StackMapSink` does not require these. This PR tweaks
the plumbing in a slightly different way to make `wasmtime` GC tests,
and presumably other consumers of stack-map info from the top-level
Cranelift interface, happy.
The asserts on the sizes of the VCode constant-table data structures
introduced in PR #2328 are dependent on the size of data structures such
as `HashMap` in the standard library, which can change. In particular,
on Rust 1.46 (which is not current, but could be e.g. pinned by a
project using Cranelift), it appears that these asserts fail. We
shouldn't depend on stdlib internals; IMHO the asserts on our own struct
sizes are enough to catch accidental size blowups.
`lucetc` currently *almost*, but not quite, works with the new x64
backend; the only missing piece is support for the particular
instructions emitted as part of its prologue stack-check.
We do not normally see `brff`, `brif`, or `ifcmp_sp` in CLIF generated by
`cranelift-wasm` without the old-backend legalization rules, so these
were not supported in the new x64 backend as they were not necessary for
Wasm MVP support. Using them resulted in an `unimplemented!()` panic.
This PR adds support for `brff` and `brif` analogously to how AArch64
implements them, by pattern-matching the `ifcmp` / `ffcmp` directly.
Then `ifcmp_sp` is a straightforward variant of `ifcmp`.
Along the way, this also removes the notion of "fallthrough block" from
the branch-group lowering method; instead, `fallthrough` instructions
are handled as normal branches to their explicitly-provided targets,
which (in the original CLIF) match the fallthrough block. The reason for
this is that the block reordering done as part of lowering can change
the fallthrough block. We were not using `fallthrough` instructions in
the output produced by `cranelift-wasm`, so this, too, was not
previously caught.
With these changes, the `lucetc` crate in Lucet passes all tests with
the `x64` feature-flag added to its `cranelift-codegen` dependency.
This changes the following:
mov x0, #4
ldr x0, [x1, #4]
Into:
ldr x0, [x1]
I noticed this pattern (but with #0), in a benchmark.
Copyright (c) 2020, Arm Limited.
* this requires upgrading to wasmparser 0.67.0.
* There are no CLIF side changes because the CLIF `select` instruction is
polymorphic enough.
* on aarch64, there is unfortunately no conditional-move (csel) instruction on
vectors. This patch adds a synthetic instruction `VecCSel` which *does*
behave like that. At emit time, this is emitted as an if-then-else diamond
(4 insns).
* aarch64 implementation is otherwise straightforwards.
In existing MachInst backends, many instructions -- any that can trap or
result in a relocation -- carry `SourceLoc` values in order to propagate
the location-in-original-source to use to describe resulting traps or
relocation errors.
This is quite tedious, and also error-prone: it is likely that the
necessary plumbing will be missed in some cases, and in any case, it's
unnecessarily verbose.
This PR factors out the `SourceLoc` handling so that it is tracked
during emission as part of the `EmitState`, and plumbed through
automatically by the machine-independent framework. Instruction emission
code that directly emits trap or relocation records can query the
current location as necessary. Then we only need to ensure that memory
references and trap instructions, at their (one) emission point rather
than their (many) lowering/generation points, are wired up correctly.
This does have the side-effect that some loads and stores that do not
correspond directly to user code's heap accesses will have unnecessary
but harmless trap metadata. For example, the load that fetches a code
offset from a jump table will have a 'heap out of bounds' trap record
attached to it; but because it is bounds-checked, and will never
actually trap if the lowering is correct, this should be harmless. The
simplicity improvement here seemed more worthwhile to me than plumbing
through a "corresponds to user-level load/store" bit, because the latter
is a bit complex when we allow for op merging.
Closes#2290: though it does not implement a full "metadata" scheme as
described in that issue, this seems simpler overall.
* Make cranelift_codegen::isa::unwind::input public
* Move UnwindCode's common offset field out of the structure
* Make MachCompileResult::unwind_info more generic
* Record initial stack pointer offset
This approach suffers from memory-size bloat during compile time due to the desire to de-duplicate the constants emitted and reduce runtime memory-size. As a first step, though, this provides an end-to-end mechanism for constants to be emitted in the MachBuffer islands.
There has been some confusion over the meaning of the "sign-extend"
(`sext`) and "zero-extend" (`uext`) attributes on parameters and return
values in signatures. According to the three implemented backends, these
attributes indicate that a value narrower than a full register should
always be extended in the way specified. However, they are much more
useful if they mean "extend in this way if the ABI requires extending":
only the ABI backend knows whether or not a particular ABI (e.g., x64
SysV vs. x64 Baldrdash) requires extensions, while only the frontend
(CLIF generator) knows whether or not a value is signed, so the two have
to work in concert.
This is the result of some very helpful discussion in #2354 (thanks to
@uweigand for raising the issue and @bjorn3 for helping to reason about
it).
This change respects the extension attributes in the above way, rather
than unconditionally extending, to avoid potential performance
degradation as we introduce more extension attributes on signatures.
I don't think this has happened in awhile but I've run a `cargo update`
as well as trimming some of the duplicate/older dependencies in
`Cargo.lock` by updating some of our immediate dependencies as well.
This patch implements, for aarch64, the following wasm SIMD extensions.
v128.load32_zero and v128.load64_zero instructions
https://github.com/WebAssembly/simd/pull/237
The changes are straightforward:
* no new CLIF instructions. They are translated into an existing CLIF scalar
load followed by a CLIF `scalar_to_vector`.
* the comment/specification for CLIF `scalar_to_vector` has been changed to
match the actual intended semantics, per consulation with Andrew Brown.
* translation from `scalar_to_vector` to aarch64 `fmov` instruction. This
has been generalised slightly so as to allow both 32- and 64-bit transfers.
* special-case zero in `lower_constant_f128` in order to avoid a
potentially slow call to `Inst::load_fp_constant128`.
* Once "Allow loads to merge into other operations during instruction
selection in MachInst backends"
(https://github.com/bytecodealliance/wasmtime/issues/2340) lands,
we can use that functionality to pattern match the two-CLIF pair and
emit a single AArch64 instruction.
* A simple filetest has been added.
There is no comprehensive testcase in this commit, because that is a separate
repo. The implementation has been tested, nevertheless.
When performing a function call, the platform ABI may require space
on the stack to hold outgoing arguments and/or return values.
Currently, this is supported via decrementing the stack pointer
before the call and incrementing it afterwards, using the
emit_stack_pre_adjust and emit_stack_post_adjust methods of
ABICaller. However, on some platforms it would be preferable
to just allocate enough space for any call done in the function
in the caller's prologue instead.
This patch adds support to allow back-ends to choose that method.
Instead of calling emit_stack_pre/post_adjust around a call, they
simply call a new accumulate_outgoing_args_size method of
ABICaller instead. This will pass on the required size to the
ABICallee structure of the calling function, which will accumulate
the maximum size required for all function calls.
That accumulated size is then passed to the gen_clobber_save
and gen_clobber_restore functions so they can include the size
in the stack allocation / deallocation that already happens in
the prologue / epilogue code.
This patch implements, for aarch64, the following wasm SIMD extensions
i32x4.dot_i16x8_s instruction
https://github.com/WebAssembly/simd/pull/127
It also updates dependencies as follows, in order that the new instruction can
be parsed, decoded, etc:
wat to 1.0.27
wast to 26.0.1
wasmparser to 0.65.0
wasmprinter to 0.2.12
The changes are straightforward:
* new CLIF instruction `widening_pairwise_dot_product_s`
* translation from wasm into `widening_pairwise_dot_product_s`
* new AArch64 instructions `smull`, `smull2` (part of the `VecRRR` group)
* translation from `widening_pairwise_dot_product_s` to `smull ; smull2 ; addv`
There is no testcase in this commit, because that is a separate repo. The
implementation has been tested, nevertheless.
The ABI common code currently passes the fixed frame size to
the gen_clobber_save back-end routine, which is required to
emit code to allocate the required stack space in the prologue.
Similarly, the back-end needs to emit code to de-allocate the
stack in the epilogue. However, at this point the back-end
does not have access to that fixed frame size value any more.
With targets that use a frame pointer, this does not matter,
since de-allocation can be done simply by assigning the frame
pointer back to the stack pointer. However, on targets that
do not use a frame pointer, the frame size is required.
To allow back-ends that option, this patch changes ABI common
code to pass the fixed frame size to get_clobber_restore as
well (the same value as is passed to get_clobber_save).
The common gen_prologue code currently assumes that the stack
pointer has to be aligned to twice the word size. While this
is true for many ABIs, it does not hold universally.
This patch adds a new callback stack_align that back-ends can
provide to define the specific stack alignment required by the
ABI on that platform.
* Rewrite interpreter generically
This change re-implements the Cranelift interpreter to use generic values; this makes it possible to do abstract interpretation of Cranelift instructions. In doing so, the interpretation state is extracted from the `Interpreter` structure and is accessed via a `State` trait; this makes it possible to not only more clearly observe the interpreter's state but also to interpret using a dummy state (e.g. `ImmutableRegisterState`). This addition made it possible to implement more of the Cranelift instructions (~70%, ignoring the x86-specific instructions).
* Replace macros with closures
The immediate splitting code contained a bug causing both low and high
to be equal for i128. This is the root cause for
bjorn3/rustc_codegen_cranelift#1097 and likely the only bug preventing
cg_clif from bootstrapping rustc.
In particular, introduce initial support for the MOVI and MVNI
instructions, with 8-bit elements. Also, treat vector constants
as 32- or 64-bit floating-point numbers, if their value allows
it, by relying on the architectural zero extension. Finally,
stop generating literal loads for 32-bit constants.
Copyright (c) 2020, Arm Limited.
The changes in https://github.com/bytecodealliance/wasmtime/pull/2278 added `SourceLoc`s to several x64 `Inst` variants; between when that PR was last run in CI and when it was merged, new instructions were added that require this new parameter. This change adds the parameter in order to fix CI.
This patch implements, for aarch64, the following wasm SIMD extensions
Floating-point rounding instructions
https://github.com/WebAssembly/simd/pull/232
Pseudo-Minimum and Pseudo-Maximum instructions
https://github.com/WebAssembly/simd/pull/122
The changes are straightforward:
* `build.rs`: the relevant tests have been enabled
* `cranelift/codegen/meta/src/shared/instructions.rs`: new CLIF instructions
`fmin_pseudo` and `fmax_pseudo`. The wasm rounding instructions do not need
any new CLIF instructions.
* `cranelift/wasm/src/code_translator.rs`: translation into CLIF; this is
pretty much the same as any other unary or binary vector instruction (for
the rounding and the pmin/max respectively)
* `cranelift/codegen/src/isa/aarch64/lower_inst.rs`:
- `fmin_pseudo` and `fmax_pseudo` are converted into a two instruction
sequence, `fcmpgt` followed by `bsl`
- the CLIF rounding instructions are converted to a suitable vector
`frint{n,z,p,m}` instruction.
* `cranelift/codegen/src/isa/aarch64/inst/mod.rs`: minor extension of `pub
enum VecMisc2` to handle the rounding operations. And corresponding `emit`
cases.
The `bitmask.{8x16,16x8,32x4}` instructions do not map neatly to any single
AArch64 SIMD instruction, and instead need a sequence of around ten
instructions. Because of this, this patch is somewhat longer and more complex
than it would be for (eg) x64.
Main changes are:
* the relevant testsuite test (`simd_boolean.wast`) has been enabled on aarch64.
* at the CLIF level, add a new instruction `vhigh_bits`, into which these wasm
instructions are to be translated.
* in the wasm->CLIF translation (code_translator.rs), translate into
`vhigh_bits`. This is straightforward.
* in the CLIF->AArch64 translation (lower_inst.rs), translate `vhigh_bits`
into equivalent sequences of AArch64 instructions. There is a different
sequence for each of the `{8x16, 16x8, 32x4}` variants.
All other changes are AArch64-specific, and add instruction definitions needed
by the previous step:
* Add two new families of AArch64 instructions: `VecShiftImm` (vector shift by
immediate) and `VecExtract` (effectively a double-length vector shift)
* To the existing AArch64 family `VecRRR`, add a `zip1` variant. To the
`VecLanesOp` family add an `addv` variant.
* Add supporting code for the above changes to AArch64 instructions:
- getting the register uses (`aarch64_get_regs`)
- mapping the registers (`aarch64_map_regs`)
- printing instructions
- emitting instructions (`impl MachInstEmit for Inst`). The handling of
`VecShiftImm` is a bit complex.
- emission tests for new instructions and variants.
