* Enable the native target by default in winch
Match cranelift-codegen's build script where if no architecture is
explicitly enabled then the host architecture is implicitly enabled.
* Refactor Cranelift's ISA builder to share more with Winch
This commit refactors the `Builder` type to have a type parameter
representing the finished ISA with Cranelift and Winch having their own
typedefs for `Builder` to represent their own builders. The intention is
to use this shared functionality to produce more shared code between the
two codegen backends.
* Moving compiler shared components to a separate crate
* Restore native flag inference in compiler building
This fixes an oversight from the previous commits to use
`cranelift-native` to infer flags for the native host when using default
settings with Wasmtime.
* Move `Compiler::page_size_align` into wasmtime-environ
The `cranelift-codegen` crate doesn't need this and winch wants the same
implementation, so shuffle it around so everyone has access to it.
* Fill out `Compiler::{flags, isa_flags}` for Winch
These are easy enough to plumb through with some shared code for
Wasmtime.
* Plumb the `is_branch_protection_enabled` flag for Winch
Just forwarding an isa-specific setting accessor.
* Moving executable creation to shared compiler crate
* Adding builder back in and removing from shared crate
* Refactoring the shared pieces for the `CompilerBuilder`
I decided to move a couple things around from Alex's initial changes.
Instead of having the shared builder do everything, I went back to
having each compiler have a distinct builder implementation. I
refactored most of the flag setting logic into a single shared location,
so we can still reduce the amount of code duplication.
With them being separate, we don't need to maintain things like
`LinkOpts` which Winch doesn't currently use. We also have an avenue to
error when certain flags are sent to Winch if we don't support them. I'm
hoping this will make things more maintainable as we build out Winch.
I'm still unsure about keeping everything shared in a single crate
(`cranelift_shared`). It's starting to feel like this crate is doing too
much, which makes it difficult to name. There does seem to be a need for
two distinct abstraction: creating the final executable and the handling
of shared/ISA flags when building the compiler. I could make them into
two separate crates, but there doesn't seem to be enough there yet to
justify it.
* Documentation updates, and renaming the finish method
* Adding back in a default temporarily to pass tests, and removing some unused imports
* Fixing winch tests with wrong method name
* Removing unused imports from codegen shared crate
* Apply documentation formatting updates
Co-authored-by: Saúl Cabrera <saulecabrera@gmail.com>
* Adding back in cranelift_native flag inferring
* Adding new shared crate to publish list
* Adding write feature to pass cargo check
---------
Co-authored-by: Alex Crichton <alex@alexcrichton.com>
Co-authored-by: Saúl Cabrera <saulecabrera@gmail.com>
* Remove the Cranelift `vselect` instruction
This instruction is documented as selecting lanes based on the "truthy"
value of the condition lane, but the current status of the
implementation of this instruction is:
* x64 - uses the high bit for `f32x4` and `f64x2` and otherwise uses the
high bit of each byte doing a byte-wise lane select rather than
whatever the controlling type is.
* AArch64 - this is the same as `bitselect` which is a bit-wise
selection rather than a lane-wise selection.
* s390x - this is the same as AArch64, a bit-wise selection rather than
lane-wise.
* interpreter - the interpreter implements the documented semantics of
selecting based on "truthy" values.
Coupled with the status of the implementation is the fact that this
instruction is not used by WebAssembly SIMD today either. The only use
of this instruction in Cranelift is the nan-canonicalization pass. By
moving nan-canonicalization to `bitselect`, since that has the desired
semantics, there's no longer any need for `vselect`.
Given this situation this commit subsqeuently removes `vselect` and all
usage of it throughout Cranelift.
Closes#5917
* Review comments
* Bring back vselect opts as bitselect opts
* Clean up vselect usage in the interpreter
* Move bitcast in nan canonicalization
* Add a comment about float optimization
* Initial support for the Relaxed SIMD proposal
This commit adds initial scaffolding and support for the Relaxed SIMD
proposal for WebAssembly. Codegen support is supported on the x64 and
AArch64 backends on this time.
The purpose of this commit is to get all the boilerplate out of the way
in terms of plumbing through a new feature, adding tests, etc. The tests
are copied from the upstream repository at this time while the
WebAssembly/testsuite repository hasn't been updated.
A summary of changes made in this commit are:
* Lowerings for all relaxed simd opcodes have been added, currently all
exhibiting deterministic behavior. This means that few lowerings are
optimal on the x86 backend, but on the AArch64 backend, for example,
all lowerings should be optimal.
* Support is added to codegen to, eventually, conditionally generate
different code based on input codegen flags. This is intended to
enable codegen to more efficient instructions on x86 by default, for
example, while still allowing embedders to force
architecture-independent semantics and behavior. One good example of
this is the `f32x4.relaxed_fmadd` instruction which when deterministic
forces the `fma` instruction, but otherwise if the backend doesn't
have support for `fma` then intermediate operations are performed
instead.
* Lowerings of `iadd_pairwise` for `i16x8` and `i32x4` were added to the
x86 backend as they're now exercised by the deterministic lowerings of
relaxed simd instructions.
* Sample codegen tests for added for x86 and aarch64 for some relaxed
simd instructions.
* Wasmtime embedder support for the relaxed-simd proposal and forcing
determinism have been added to `Config` and the CLI.
* Support has been added to the `*.wast` runtime execution for the
`(either ...)` matcher used in the relaxed-simd proposal.
* Tests for relaxed-simd are run both with a default `Engine` as well as
a "force deterministic" `Engine` to test both configurations.
* All tests from the upstream repository were copied into Wasmtime.
These tests should be deleted when WebAssembly/testsuite is updated.
* x64: Add x86-specific lowerings for relaxed simd
This commit builds on the prior commit and adds an array of `x86_*`
instructions to Cranelift which have semantics that match their
corresponding x86 equivalents. Translation for relaxed simd is then
additionally updated to conditionally generate different CLIF for
relaxed simd instructions depending on whether the target is x86 or not.
This means that for AArch64 no changes are made but for x86 most relaxed
instructions now lower to some x86-equivalent with slightly different
semantics than the "deterministic" lowering.
* Add libcall support for fma to Wasmtime
This will be required to implement the `f32x4.relaxed_madd` instruction
(and others) when an x86 host doesn't specify the `has_fma` feature.
* Ignore relaxed-simd tests on s390x and riscv64
* Enable relaxed-simd tests on s390x
* Update cranelift/codegen/meta/src/shared/instructions.rs
Co-authored-by: Andrew Brown <andrew.brown@intel.com>
* Add a FIXME from review
* Add notes about deterministic semantics
* Don't default `has_native_fma` to `true`
* Review comments and rebase fixes
---------
Co-authored-by: Andrew Brown <andrew.brown@intel.com>
This catches a case that wasn't handled previously by #5880 to allow a
constant load to be folded into an instruction rather than forcing it to
be loaded into a temporary register.
* x64: Add `shuffle` cases for `punpck{h,l}bw`
I noticed this difference between LLVM and Cranelift for something I was
looking at recently, and while it's probably not all that common I
figured I'd add it here since it should be somewhat useful nevertheless.
* Review feedback
* Use u128 extractor instead
This commit adds support for the bare lowering of the `iadd_pairwise`
instruction with `i16x8` and `i32x4` types on the x64 backend. These
lowerings are achieved with the `phaddw` and `phaddd` instructions,
respectively. Additionally AVX encodings of these instructions are added
too.
The motivation for these new lowerings comes from the relaxed-simd
proposal which will use them in the deterministic lowering of some
instructions on the x64 backend.
A number of places in the x64 backend make use of 128-bit constants for
various wasm SIMD-related instructions although most of them currently
use the `x64_xmm_load_const` helper to load the constant into a
register. Almost all xmm instructions, however, enable using a memory
operand which means that these loads can be folded into instructions to
help reduce register pressure. Automatic conversions were added for a
`VCodeConstant` into an `XmmMem` value and then explicit loads were all
removed in favor of forwarding the `XmmMem` value directly to the
underlying instruction. Note that some instances of `x64_xmm_load_const`
remain since they're used in contexts where load sinking won't work
(e.g. they're the first operand, not the second for non-commutative
instructions).
This was added for the wasm SIMD proposal but I've been poking around at
this recently and the instruction can instead be represented by its
component parts with the same semantics I believe. This commit removes
the instruction and instead represents it with the existing
`iadd_pairwise` instruction (among others) and updates backends to with
new pattern matches to have the same codegen as before.
This interestingly entirely removed the codegen rule with no replacement
on the AArch64 backend as the existing rules all existed to produce the
same codegen.
This uses the `cmov`, which was previously necessary for Spectre
mitigation, to clamp the table index instead of zeroing it. By then
placing the default target as the last entry in the table, we can use
just one branch instruction in all cases.
Since there isn't a bounds-check branch any more, this sequence no
longer needs Spectre mitigation. And since we don't need to be careful
about preserving flags, half the instructions can be removed from this
pseudoinstruction and emitted as regular instructions instead.
This is a net savings of three bytes in the encoding of x64's br_table
pseudoinstruction. The generated code can sometimes be longer overall
because the blocks are emitted in a slightly different order.
My benchmark results show a very small effect on runtime performance
with this change.
The spidermonkey benchmark in Sightglass runs "1.01x faster" than main
by instructions retired, but with no significant difference in CPU
cycles. I think that means it rarely hit the default case in any
br_table instructions it executed.
The pulldown-cmark benchmark in Sightglass runs "1.01x faster" than main
by CPU cycles, but main runs "1.00x faster" by instructions retired. I
think that means this benchmark hit the default case a significant
amount of the time, so it executes a few more instructions per br_table,
but maybe the branches were predicted better.
* x64: Fill out more AVX instructions
This commit fills out more AVX instructions for SSE counterparts
currently used. Many of these instructions do not benefit from the
3-operand form that AVX uses but instead benefit from being able to use
`XmmMem` instead of `XmmMemAligned` which may be able to avoid some
extra temporary registers in some cases.
* Review comments
* Rework the blockorder module to reuse the dom tree's cfg postorder
* Update domtree tests
* Treat br_table with an empty jump table as multiple block exits
* Bless tests
* Change branch_idx to succ_idx and fix the comment
The relaxed-simd proposal for WebAssembly adds a fused-multiply-add
operation for `v128` types so I was poking around at Cranelift's
existing support for its `fma` instruction. I was also poking around at
the x86_64 ISA's offerings for the FMA operation and ended up with this
PR that improves the lowering of the `fma` instruction on the x64
backend in a number of ways:
* A libcall-based fallback is now provided for `f32x4` and `f64x2` types
in preparation for eventual support of the relaxed-simd proposal.
These encodings are horribly slow, but it's expected that if FMA
semantics must be guaranteed then it's the best that can be done
without the `fma` feature. Otherwise it'll be up to producers (e.g.
Wasmtime embedders) whether wasm-level FMA operations should be FMA or
multiply-then-add.
* In addition to the existing `vfmadd213*` instructions opcodes were
added for `vfmadd132*`. The `132` variant is selected based on which
argument can have a sinkable load.
* Any argument in the `fma` CLIF instruction can now have a
`sinkable_load` and it'll generate a single FMA instruction.
* All `vfnmadd*` opcodes were added as well. These are pattern-matched
where one of the arguments to the CLIF instruction is an `fneg`. I
opted to not add a new CLIF instruction here since it seemed like
pattern matching was easy enough but I'm also not intimately familiar
with the semantics here so if that's the preferred approach I can do
that too.
* x64: Enable load-coalescing for SSE/AVX instructions
This commit unlocks the ability to fold loads into operands of SSE and
AVX instructions. This is beneficial for both function size when it
happens in addition to being able to reduce register pressure.
Previously this was not done because most SSE instructions require
memory to be aligned. AVX instructions, however, do not have alignment
requirements.
The solution implemented here is one recommended by Chris which is to
add a new `XmmMemAligned` newtype wrapper around `XmmMem`. All SSE
instructions are now annotated as requiring an `XmmMemAligned` operand
except for a new new instruction styles used specifically for
instructions that don't require alignment (e.g. `movdqu`, `*sd`, and
`*ss` instructions). All existing instruction helpers continue to take
`XmmMem`, however. This way if an AVX lowering is chosen it can be used
as-is. If an SSE lowering is chosen, however, then an automatic
conversion from `XmmMem` to `XmmMemAligned` kicks in. This automatic
conversion only fails for unaligned addresses in which case a load
instruction is emitted and the operand becomes a temporary register
instead. A number of prior `Xmm` arguments have now been converted to
`XmmMem` as well.
One change from this commit is that loading an unaligned operand for an
SSE instruction previously would use the "correct type" of load, e.g.
`movups` for f32x4 or `movup` for f64x2, but now the loading happens in
a context without type information so the `movdqu` instruction is
generated. According to [this stack overflow question][question] it
looks like modern processors won't penalize this "wrong" choice of type
when the operand is then used for f32 or f64 oriented instructions.
Finally this commit improves some reuse of logic in the `put_in_*_mem*`
helper to share code with `sinkable_load` and avoid duplication. With
this in place some various ISLE rules have been updated as well.
In the tests it can be seen that AVX-instructions are now automatically
load-coalesced and use memory operands in a few cases.
[question]: https://stackoverflow.com/questions/40854819/is-there-any-situation-where-using-movdqu-and-movupd-is-better-than-movups
* Fix tests
* Fix move-and-extend to be unaligned
These don't have alignment requirements like other xmm instructions as
well. Additionally add some ISA tests to ensure that their output is
tested.
* Review comments
This is a follow-up to comments in #5795 to remove some cruft in the x64
instruction model to ensure that the shape of an `Inst` reflects what's
going to happen in regalloc and encoding. This accessor was used to
handle `round*`, `pextr*`, and `pshufb` instructions. The `round*` ones
had already moved to the appropriate `XmmUnary*` variant and `pshufb`
was additionally moved over to that variant as well.
The `pextr*` instructions got a new `Inst` variant and additionally had
their constructors slightly modified to no longer require the type as
input. The encoding for these instructions now automatically handles the
various type-related operands through a new `SseOpcode::Pextrq` operand
to represent 64-bit movements.
This commit refactors a bit about how sinkable loads are handled in the
x64 backend. The intention is to bring most handling around sinkable
loads up to date with the current state of the backend since things have
changed since these were originally introduced, namely automatic
conversions between types in ISLE. For example the `Value` type can be
automatically converted to `RegMem` to perform load sinking, but some
rules are still explicitly doing matching themselves.
Here I've removed explicit handling of immediates and sinkable loads
when they're the right-hand-side of an operation. These cases are
already handle by the "base case" when converting a `Value` to a
`RegMemImm`. Instead only rules explicitly for left-hand-side immediates
and sinkable loads remain. This helps cut down on the number of explicit
rules needed.
Additionally in the same manner that `Value` can be automatically
converted to `RegMem` I've added automatic conversions from
`SinkableLoad` to `RegMem` and the various other newtypes. This helps
cut down a bit on rule verbosity where `sink_load_*` is largely no
longer necessary.
* x64: Add most remaining AVX lowerings
This commit goes through `inst.isle` and adds a corresponding AVX
lowering for most SSE lowerings. I opted to skip instructions where the
SSE lowering didn't read/modify a register, such as `roundps`. I think
that AVX will benefit these instructions when there's load-merging since
AVX doesn't require alignment, but I've deferred that work to a future
PR.
Otherwise though in this PR I think all (or almost all) of the 3-operand
forms of AVX instructions are supported with their SSE counterparts.
This should ideally improve codegen slightly by removing register
pressure and the need for `movdqa` between registers. I've attempted to
ensure that there's at least one codegen test for all the new instructions.
As a side note, the recent capstone integration into `precise-output`
tests helped me catch a number of encoding bugs much earlier than
otherwise, so I've found that incredibly useful in tests!
* Move `vpinsr*` instructions to their own variant
Use true `XmmMem` and `GprMem` types in the instruction as well to get
more type-level safety for what goes where.
* Remove `Inst::produces_const` accessor
Instead of conditionally defining regalloc and various other operations
instead add dedicated `MInst` variants for operations which are intended
to produce a constant to have more clear interactions with regalloc and
printing and such.
* Fix tests
* Register traps in `MachBuffer` for load-folding ops
This adds a missing `add_trap` to encoding of VEX instructions with
memory operands to ensure that if they cause a segfault that there's
appropriate metadata for Wasmtime to understand that the instruction
could in fact trap. This fixes a fuzz test case found locally where v8
trapped and Wasmtime didn't catch the signal and crashed the fuzzer.
* x64: Add rudimentary support for some AVX instructions
I was poking around Spidermonkey's wasm backend and saw that the various
assembler functions used are all `v*`-prefixed which look like they're
intended for use with AVX instructions. I looked at Cranelift and it
currently doesn't have support for many AVX-based instructions, so I
figured I'd take a crack at it!
The support added here is a bit of a mishmash when viewed alone, but my
general goal was to take a single instruction from the SIMD proposal for
WebAssembly and migrate all of its component instructions to AVX. I, by
random chance, picked a pretty complicated instruction of `f32x4.min`.
This wasm instruction is implemented on x64 with 4 unique SSE
instructions and ended up being a pretty good candidate.
Further digging about AVX-vs-SSE shows that there should be two major
benefits to using AVX over SSE:
* Primarily AVX instructions largely use a three-operand form where two
input registers are operated with and an output register is also
specified. This is in contrast to SSE's predominant
one-register-is-input-but-also-output pattern. This should help free
up the register allocator a bit and additionally remove the need for
movement between registers.
* As #4767 notes the memory-based operations of VEX-encoded instructions
(aka AVX instructions) do not have strict alignment requirements which
means we would be able to sink loads and stores into individual
instructions instead of having separate instructions.
So I set out on my journey to implement the instructions used by
`f32x4.min`. The first few were fairly easy. The machinst backends are
already of the shape "take these inputs and compute the output" where
the x86 requirement of a register being both input and output is
postprocessed in. This means that the `inst.isle` creation helpers for
SSE instructions were already of the correct form to use AVX. I chose to
add new `rule` branches for the instruction creation helpers, for
example `x64_andnps`. The new `rule` conditionally only runs if AVX is
enabled and emits an AVX instruction instead of an SSE instruction for
achieving the same goal. This means that no lowerings of clif
instructions were modified, instead just new instructions are being
generated.
The VEX encoding was previously not heavily used in Cranelift. The only
current user are the FMA-style instructions that Cranelift has at this
time. These FMA instructions have one extra operand than `vandnps`, for
example, so I split the existing `XmmRmRVex` into a few more variants to
fit the shape of the instructions that needed generating for
`f32x4.min`. This was accompanied then with more AVX opcode definitions,
more emission support, etc.
Upon implementing all of this it turned out that the test suite was
failing on my machine due to the memory-operand encodings of VEX
instructions not being supported. I didn't explicitly add those in
myself but some preexisting RIP-relative addressing was leaking into the
new instructions with existing tests. I opted to go ahead and fill out
the memory addressing modes of VEX encoding to get the tests passing
again.
All-in-all this PR adds new instructions to the x64 backend for a number
of AVX instructions, updates 5 existing instruction producers to use AVX
instructions conditionally, implements VEX memory operands, and adds
some simple tests for the new output of `f32x4.min`. The existing
runtest for `f32x.min` caught a few intermediate bugs along the way and
I additionally added a plain `target x86_64` to that runtest to ensure
that it executes with and without AVX to test the various lowerings.
I'll also note that this, and future support, should be well-fuzzed
through Wasmtime's fuzzing which may explicitly disable AVX support
despite the machine having access to AVX, so non-AVX lowerings should be
well-tested into the future.
It's also worth mentioning that I am not an AVX or VEX or x64 expert.
Implementing the memory operand part for VEX was the hardest part of
this PR and while I think it should be good someone else should
definitely double-check me. Additionally I haven't added many
instructions to the x64 backend yet so I may have missed obvious places
to tests or such, so am happy to follow-up with anything to be more
thorough if necessary.
Finally I should note that this is just the tip of the iceberg when it
comes to AVX. My hope is to get some of the idioms sorted out to make it
easier for future PRs to add one-off instruction lowerings or such.
* Review feedback
Rework br_table to use BlockCall, allowing us to avoid adding new nodes during ssa construction to hold block arguments. Additionally, many places where we previously matched on InstructionData to extract branch destinations can be replaced with a use of branch_destination or branch_destination_mut.
This updates the signatures of the `xmm_rm_r` helper function and then
updates existing users and migrates other users to the helper now that
the type information is no longer required.
* Remove trailing whitespace in `lower.isle` files
* Legalize the `band_not` instruction into simpler form
This commit legalizes the `band_not` instruction into `band`-of-`bnot`,
or two instructions. This is intended to assist with egraph-based
optimizations where the `band_not` instruction doesn't have to be
specifically included in other bit-operation-patterns.
Lowerings of the `band_not` instruction have been moved to a
specialization of the `band` instruction.
* Legalize `bor_not` into components
Same as prior commit, but for the `bor_not` instruction.
* Legalize bxor_not into bxor-of-bnot
Same as prior commits. I think this also ended up fixing a bug in the
s390x backend where `bxor_not x y` was actually translated as `bnot
(bxor x y)` by accident given the test update changes.
* Simplify not-fused operands for riscv64
Looks like some delegated-to rules have special-cases for "if this
feature is enabled use the fused instruction" so move the clause for
testing the feature up to the lowering phase to help trigger other rules
if the feature isn't enabled. This should make the riscv64 backend more
consistent with how other backends are implemented.
* Remove B{and,or,xor}Not from cost of egraph metrics
These shouldn't ever reach egraphs now that they're legalized away.
* Add an egraph optimization for `x^-1 => ~x`
This adds a simplification node to translate xor-against-minus-1 to a
`bnot` instruction. This helps trigger various other optimizations in
the egraph implementation and also various backend lowering rules for
instructions. This is chiefly useful as wasm doesn't have a `bnot`
equivalent, so it's encoded as `x^-1`.
* Add a wasm test for end-to-end bitwise lowerings
Test that end-to-end various optimizations are being applied for input
wasm modules.
* Specifically don't self-update rustup on CI
I forget why this was here originally, but this is failing on Windows
CI. In general there's no need to update rustup, so leave it as-is.
* Cleanup some aarch64 lowering rules
Previously a 32/64 split was necessary due to the `ALUOp` being different
but that's been refactored away no so there's no longer any need for
duplicate rules.
* Narrow a x64 lowering rule
This previously made more sense when it was `band_not` and rarely used,
but be more specific in the type-filter on this rule that it's only
applicable to SIMD types with lanes.
* Simplify xor-against-minus-1 rule
No need to have the commutative version since constants are already
shuffled right for egraphs
* Optimize band-of-bnot when bnot is on the left
Use some more rules in the egraph algebraic optimizations to
canonicalize band/bor/bxor with a `bnot` operand to put the operand on
the right. That way the lowerings in the backends only have to list the
rule once, with the operand on the right, to optimize both styles of
input.
* Add commutative lowering rules
* Update cranelift/codegen/src/isa/x64/lower.isle
Co-authored-by: Jamey Sharp <jamey@minilop.net>
---------
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* Cranelift: Introduce the `tail` calling convention
This is an unstable-ABI calling convention that we will eventually use to
support Wasm tail calls.
Co-Authored-By: Jamey Sharp <jsharp@fastly.com>
* Cranelift: Introduce the `return_call` and `return_call_indirect` instructions
These will be used to implement tail calls for Wasm and any other language
targeting CLIF. The `return_call_indirect` instruction differs from the Wasm
instruction of the same name by taking a native address callee rather than a
Wasm function index.
Co-Authored-By: Jamey Sharp <jsharp@fastly.com>
* Cranelift: Implement verification rules for `return_call[_indirect]`
They must:
* have the same return types between the caller and callee,
* have the same calling convention between caller and callee,
* and that calling convention must support tail calls.
Co-Authored-By: Jamey Sharp <jsharp@fastly.com>
* cargo fmt
---------
Co-authored-by: Jamey Sharp <jsharp@fastly.com>
Add a conditional branch instruction with two targets: brif. This instruction will eventually replace brz and brnz, as it encompasses the behavior of both.
This PR also changes the InstructionData layout for instruction formats that hold BlockCall values, taking the same approach we use for Value arguments. This allows branch_destination to return a slice to the BlockCall values held in the instruction, rather than requiring that we pattern match on InstructionData to fetch the then/else blocks.
Function generation for fuzzing has been updated to generate uses of brif, and I've run the cranelift-fuzzgen target locally for hours without triggering any new failures.
Add a new type BlockCall that represents the pair of a block name with arguments to be passed to it. (The mnemonic here is that it looks a bit like a function call.) Rework the implementation of jump, brz, and brnz to use BlockCall instead of storing the block arguments as varargs in the instruction's ValueList.
To ensure that we're processing block arguments from BlockCall values in instructions, three new functions have been introduced on DataFlowGraph that both sets of arguments:
inst_values - returns an iterator that traverses values in the instruction and block arguments
map_inst_values - applies a function to each value in the instruction and block arguments
overwrite_inst_values - overwrite all values in an instruction and block arguments with values from the iterator
Co-authored-by: Jamey Sharp <jamey@minilop.net>
* add clif-util compile option to output object file
* switch from a box to a borrow
* update objectmodule tests to use borrowed isa
* put targetisa into an arc
In #5031, we removed `bool` types from CLIF, using integers instead for
"truthy" values. This greatly simplified the IR, and was generally an
improvement.
However, because x86's `SETcc` instruction sets only the low 8 bits of a
register, we chose to use `i8` types as the result of `icmp` and `fcmp`,
to avoid the need for a masking operation when materializing the result.
Unfortunately this means that uses of truthy values often now have
`uextend` operations, especially when coming from Wasm (where truthy
values are naturally `i32`-typed). For example, where we previously had
`(brz (icmp ...))`, we now have `(brz (uextend (icmp ...)))`.
It's arguable whether or not we should switch to `i32` truthy values --
in most cases we can avoid materializing a value that's immediately used
for a branch or select, so a mask would in most cases be unnecessary,
and it would be a win at the IR level -- but irrespective of that, this
change *did* regress our generated code quality: our backends had
patterns for e.g. `(brz (icmp ...))` but not with the `uextend`, so we
were *always* materializing truthy values. Many blocks thus ended with
"cmp; setcc; cmp; test; branch" rather than "cmp; branch".
In #5391 we noticed this and fixed it on x64, but it was a general
problem on aarch64 and riscv64 as well. This PR introduces a
`maybe_uextend` extractor that "looks through" uextends, and uses it
where we consume truthy values, thus fixing the regression. This PR
also adds compile filetests to ensure we don't regress again.
The riscv64 backend has not been updated here because doing so appears
to trigger another issue in its branch handling; fixing that is TBD.
This change adds support for immediate to memory moves in x64 which
are needed by Winch for zeroing local slots.
This change follows the guideline in `isa/x64/inst/emit` and uses
other instructions (immediate to register moves) as a base for the
test cases.
The instruction encoding expectation was derived by assembling each
instruction and inspecting the assembly with `objdump`.
Fixes#5199.
Fixes#5200.
Fixes#5452.
Fixes#5453.
On riscv64, there is apparently an autoconversion from `ValueRegs` to
`Reg` that takes just the low register [0], and removing this conversion
causes 48 errors. As a result of this, `select` with an `i128` condition
was silently miscompiling, testing only the low 64 bits. We should
remove this autoconversion to ensure we aren't missing any other silent
truncations, but for now this PR just adds the explicit `I128` logic for
`select` / `select_spectre_guard`.
[0]
d9fdbfd50e/cranelift/codegen/src/isa/riscv64/inst.isle (L1762)
* Refactor lower_branch to have Unit result
Branches cannot have any output, so it is more straightforward
to have the ISLE term return Unit instead of InstOutput.
Also provide a new `emit_side_effect` term to simplify
implementation of `lower_branch` rules with Unit result.
* Simplify LowerBackend interface
Move all remaining asserts from the LowerBackend::lower and
::lower_branch_group into the common call site.
Change return value of ::lower to Option<InstOutput>, and
return value of ::lower_branch_group to Option<()> to match
ISLE term signature.
Only pass the first branch into ::lower_branch_group and
rename it to ::lower_branch.
As a result of all those changes, LowerBackend routines
now consists solely to calls to the corresponding ISLE
routines.
Now that all operations are implemented in ISLE, simplify Rust
code by providing a generic error message if any operation is
not implemented in ISLE. Done across all targets.
* aarch64: constant generation cleanup
Add support for MOVZ and MOVN generation via ISLE.
Handle f32const, f64const, and nop instructions via ISLE.
No longer call Inst::gen_constant from lower.rs.
* riscv64: constant generation cleanup
Handle f32const, f64const, and nop instructions via ISLE.
* s390x: constant generation cleanup
Fix rule priorities for "imm" term.
Only handle 32-bit stack offsets; no longer use load_constant64.
* x64: constant generation cleanup
No longer call Inst::gen_constant from lower.rs or abi.rs.
* Refactor LowerBackend::lower to return InstOutput
No longer write to the per-insn output registers; instead, return
an InstOutput vector of temp registers holding the outputs.
This will allow calling LowerBackend::lower multiple times for
the same instruction, e.g. to rematerialize constants.
When emitting the primary copy of the instruction during lowering,
writing to the per-insn registers is now done in lower_clif_block.
As a result, the ISLE lower_common routine is no longer needed.
In addition, the InsnOutput type and all code related to it
can be removed as well.
* Refactor IsleContext to hold a LowerBackend reference
Remove the "triple", "flags", and "isa_flags" fields that are
copied from LowerBackend to each IsleContext, and instead just
hold a reference to LowerBackend in IsleContext.
This will allow calling LowerBackend::lower from within callbacks
in src/machinst/isle.rs, e.g. to rematerialize constants.
To avoid having to pass LowerBackend references through multiple
functions, eliminate the lower_insn_to_regs subroutines in those
targets that still have them, and just inline into the main
lower routine. This also eliminates lower_inst.rs on aarch64
and riscv64.
Replace all accesses to the removed IsleContext fields by going
through the LowerBackend reference.
* Remove MachInst::gen_constant
This addresses the problem described in issue
https://github.com/bytecodealliance/wasmtime/issues/4426
that targets currently have to duplicate code to emit
constants between the ISLE logic and the gen_constant
callback.
After the various cleanups in earlier patches in this series,
the only remaining user of get_constant is put_value_in_regs
in Lower. This can now be removed, and instead constant
rematerialization can be performed in the put_in_regs ISLE
callback by simply directly calling LowerBackend::lower
on the instruction defining the constant (using a different
output register).
Since the check for egraph mode is now no longer performed in
put_value_in_regs, the Lower::flags member becomes obsolete.
Care needs to be taken that other calls directly to the
Lower::put_value_in_regs routine now handle the fact that
no more rematerialization is performed. All such calls in
target code already historically handle constants themselves.
The remaining call site in the ISLE gen_call_common helper
can be redirected to the ISLE put_in_regs callback.
The existing target implementations of gen_constant are then
unused and can be removed. (In some target there may still
be further opportunities to remove duplication between ISLE
and some local Rust code - this can be left to future patches.)
Share a zero value in the translation of ushr for i128. This increases the lifetime of the value by a few instructions, and reduces the number of registers used in the translation by one, which seems like an acceptable trade-off.
When adding some optimization rules for `icmp` in the egraph
infrastructure, we ended up creating a path to legal CLIF but with
patterns unsupported by three of our four backends: specifically,
`select_spectre_guard` with a general truthy input, rather than an
`icmp`.
In #5206 we discussed replacing `select_spectre_guard` with something
more specific, and that could still be a long-term solution here, but
doing so now would interfere with ongoing refactoring of heap access
lowering, so I've opted not to do so. (In that issue I was concerned
about complexity and didn't see the need but with this fuzzbug I'm
starting to feel a bit differently; maybe we should remove this
non-orthogonal op in the long run.)
Fixes#5417.
This commit prepares the x64 pieces from cranelift codegen to be consumed by
Winch for binary emission. This change doesn't introduce or modifies
functionality it makes the necessary pieces for binary emission public.
This change also improves documentation where applicable.
All instructions using the CPU flags types (IFLAGS/FFLAGS) were already
removed. This patch completes the cleanup by removing all remaining
instructions that define values of CPU flags types, as well as the
types themselves.
Specifically, the following features are removed:
- The IFLAGS and FFLAGS types and the SpecialType category.
- Special handling of IFLAGS and FFLAGS in machinst/isle.rs and
machinst/lower.rs.
- The ifcmp, ifcmp_imm, ffcmp, iadd_ifcin, iadd_ifcout, iadd_ifcarry,
isub_ifbin, isub_ifbout, and isub_ifborrow instructions.
- The writes_cpu_flags instruction property.
- The flags verifier pass.
- Flags handling in the interpreter.
All of these features are currently unused; no functional change
intended by this patch.
This addresses https://github.com/bytecodealliance/wasmtime/issues/3249.
