Several of these badges were out of date, with some crates in wide production
use marked as "experimental". Insted of trying to keep them up to date, just
remove them, since they are [no longer displayed on crates.io].
[no longer displayed on crates.io]: https://doc.rust-lang.org/cargo/reference/manifest.html#the-badges-section
* Initial support for the Relaxed SIMD proposal
This commit adds initial scaffolding and support for the Relaxed SIMD
proposal for WebAssembly. Codegen support is supported on the x64 and
AArch64 backends on this time.
The purpose of this commit is to get all the boilerplate out of the way
in terms of plumbing through a new feature, adding tests, etc. The tests
are copied from the upstream repository at this time while the
WebAssembly/testsuite repository hasn't been updated.
A summary of changes made in this commit are:
* Lowerings for all relaxed simd opcodes have been added, currently all
exhibiting deterministic behavior. This means that few lowerings are
optimal on the x86 backend, but on the AArch64 backend, for example,
all lowerings should be optimal.
* Support is added to codegen to, eventually, conditionally generate
different code based on input codegen flags. This is intended to
enable codegen to more efficient instructions on x86 by default, for
example, while still allowing embedders to force
architecture-independent semantics and behavior. One good example of
this is the `f32x4.relaxed_fmadd` instruction which when deterministic
forces the `fma` instruction, but otherwise if the backend doesn't
have support for `fma` then intermediate operations are performed
instead.
* Lowerings of `iadd_pairwise` for `i16x8` and `i32x4` were added to the
x86 backend as they're now exercised by the deterministic lowerings of
relaxed simd instructions.
* Sample codegen tests for added for x86 and aarch64 for some relaxed
simd instructions.
* Wasmtime embedder support for the relaxed-simd proposal and forcing
determinism have been added to `Config` and the CLI.
* Support has been added to the `*.wast` runtime execution for the
`(either ...)` matcher used in the relaxed-simd proposal.
* Tests for relaxed-simd are run both with a default `Engine` as well as
a "force deterministic" `Engine` to test both configurations.
* All tests from the upstream repository were copied into Wasmtime.
These tests should be deleted when WebAssembly/testsuite is updated.
* x64: Add x86-specific lowerings for relaxed simd
This commit builds on the prior commit and adds an array of `x86_*`
instructions to Cranelift which have semantics that match their
corresponding x86 equivalents. Translation for relaxed simd is then
additionally updated to conditionally generate different CLIF for
relaxed simd instructions depending on whether the target is x86 or not.
This means that for AArch64 no changes are made but for x86 most relaxed
instructions now lower to some x86-equivalent with slightly different
semantics than the "deterministic" lowering.
* Add libcall support for fma to Wasmtime
This will be required to implement the `f32x4.relaxed_madd` instruction
(and others) when an x86 host doesn't specify the `has_fma` feature.
* Ignore relaxed-simd tests on s390x and riscv64
* Enable relaxed-simd tests on s390x
* Update cranelift/codegen/meta/src/shared/instructions.rs
Co-authored-by: Andrew Brown <andrew.brown@intel.com>
* Add a FIXME from review
* Add notes about deterministic semantics
* Don't default `has_native_fma` to `true`
* Review comments and rebase fixes
---------
Co-authored-by: Andrew Brown <andrew.brown@intel.com>
* Remove the need to have a `Store` for an `InstancePre`
This commit relaxes a requirement of the `InstancePre` API, notably its
construction via `Linker::instantiate_pre`. Previously this function
required a `Store<T>` to be present to be able to perform type-checking
on the contents of the linker, and now this requirement has been
removed.
Items stored within a linker are either a `HostFunc`, which has type
information inside of it, or an `Extern`, which doesn't have type
information inside of it. Due to the usage of `Extern` this is why a
`Store` was required during the `InstancePre` construction process, it's
used to extract the type of an `Extern`. This commit implements a
solution where the type information of an `Extern` is stored alongside
the `Extern` itself, meaning that the `InstancePre` construction process
no longer requires a `Store<T>`.
One caveat of this implementation is that some items, such as tables and
memories, technically have a "dynamic type" where during type checking
their current size is consulted to match against the minimum size
required of an import. This no longer works when using
`Linker::instantiate_pre` as the current size used is the one when it
was inserted into the linker rather than the one available at
instantiation time. It's hoped, however, that this is a relatively
esoteric use case that doesn't impact many real-world users.
Additionally note that this is an API-breaking change. Not only is the
`Store` argument removed from `Linker::instantiate_pre`, but some other
methods such as `Linker::define` grew a `Store` argument as the type
needs to be extracted when an item is inserted into a linker.
Closes#5675
* Fix the C API
* Fix benchmark compilation
* Add C API docs
* Update crates/wasmtime/src/linker.rs
Co-authored-by: Andrew Brown <andrew.brown@intel.com>
---------
Co-authored-by: Andrew Brown <andrew.brown@intel.com>
* Resolve libcall relocations for older CPUs
Long ago Wasmtime used to have logic for resolving relocations
post-compilation for libcalls which I ended up removing during
refactorings last year. As #5563 points out, however, it's possible to
get Wasmtime to panic by disabling SSE features which forces Cranelift
to use libcalls for some floating-point operations instead. Note that
this also requires disabling SIMD because SIMD support has a baseline of
SSE 4.2.
This commit pulls back the old implementations of various libcalls and
reimplements logic necessary to have them work on CPUs without SSE 4.2
Closes#5563
* Fix log message in `wast` support
* Fix offset listed in relocations
Be sure to factor in the offset of the function itself
* Review comments
The definitions of `wasmtime::component::Val::Float{32,64}` mirrored
`wasmtime::Val::F{32,64}` by using integers as their wrapped types,
storing the bit representation of their floating point values.
This was necessary for the core Wasm `f32`/`f64` types because Rust
floats don't have guaranteed NaN bit representations.
The component model `float32`/`float64` types require NaN
canonicalization, so we can use normal Rust `f{32,64}` instead.
Closes#5480
* feat: implement memory.atomic.notify,wait32,wait64
Added the parking_spot crate, which provides the needed registry for the
operations.
Signed-off-by: Harald Hoyer <harald@profian.com>
* fix: change trap message for HeapMisaligned
The threads spec test wants "unaligned atomic"
instead of "misaligned memory access".
Signed-off-by: Harald Hoyer <harald@profian.com>
* tests: add test for atomic wait on non-shared memory
Signed-off-by: Harald Hoyer <harald@profian.com>
* tests: add tests/spec_testsuite/proposals/threads
without pooling and reference types.
Also "shared_memory" is added to the "spectest" interface.
Signed-off-by: Harald Hoyer <harald@profian.com>
* tests: add atomics_notify.wast
checking that notify with 0 waiters returns 0 on shared and non-shared
memory.
Signed-off-by: Harald Hoyer <harald@profian.com>
* tests: add tests for atomic wait on shared memory
- return 2 - timeout for 0
- return 2 - timeout for 1000ns
- return 1 - invalid value
Signed-off-by: Harald Hoyer <harald@profian.com>
* fixup! feat: implement memory.atomic.notify,wait32,wait64
Signed-off-by: Harald Hoyer <harald@profian.com>
* fixup! feat: implement memory.atomic.notify,wait32,wait64
Signed-off-by: Harald Hoyer <harald@profian.com>
Signed-off-by: Harald Hoyer <harald@profian.com>
* Return `anyhow::Error` from host functions instead of `Trap`
This commit refactors how errors are modeled when returned from host
functions and additionally refactors how custom errors work with `Trap`.
At a high level functions in Wasmtime that previously worked with
`Result<T, Trap>` now work with `Result<T>` instead where the error is
`anyhow::Error`. This includes functions such as:
* Host-defined functions in a `Linker<T>`
* `TypedFunc::call`
* Host-related callbacks like call hooks
Errors are now modeled primarily as `anyhow::Error` throughout Wasmtime.
This subsequently removes the need for `Trap` to have the ability to
represent all host-defined errors as it previously did. Consequently the
`From` implementations for any error into a `Trap` have been removed
here and the only embedder-defined way to create a `Trap` is to use
`Trap::new` with a custom string.
After this commit the distinction between a `Trap` and a host error is
the wasm backtrace that it contains. Previously all errors in host
functions would flow through a `Trap` and get a wasm backtrace attached
to them, but now this only happens if a `Trap` itself is created meaning
that arbitrary host-defined errors flowing from a host import to the
other side won't get backtraces attached. Some internals of Wasmtime
itself were updated or preserved to use `Trap::new` to capture a
backtrace where it seemed useful, such as when fuel runs out.
The main motivation for this commit is that it now enables hosts to
thread a concrete error type from a host function all the way through to
where a wasm function was invoked. Previously this could not be done
since the host error was wrapped in a `Trap` that didn't provide the
ability to get at the internals.
A consequence of this commit is that when a host error is returned that
isn't a `Trap` we'll capture a backtrace and then won't have a `Trap` to
attach it to. To avoid losing the contextual information this commit
uses the `Error::context` method to attach the backtrace as contextual
information to ensure that the backtrace is itself not lost.
This is a breaking change for likely all users of Wasmtime, but it's
hoped to be a relatively minor change to workaround. Most use cases can
likely change `-> Result<T, Trap>` to `-> Result<T>` and otherwise
explicit creation of a `Trap` is largely no longer necessary.
* Fix some doc links
* add some tests and make a backtrace type public (#55)
* Trap: avoid a trailing newline in the Display impl
which in turn ends up with three newlines between the end of the
backtrace and the `Caused by` in the anyhow Debug impl
* make BacktraceContext pub, and add tests showing downcasting behavior of anyhow::Error to traps or backtraces
* Remove now-unnecesary `Trap` downcasts in `Linker::module`
* Fix test output expectations
* Remove `Trap::i32_exit`
This commit removes special-handling in the `wasmtime::Trap` type for
the i32 exit code required by WASI. This is now instead modeled as a
specific `I32Exit` error type in the `wasmtime-wasi` crate which is
returned by the `proc_exit` hostcall. Embedders which previously tested
for i32 exits now downcast to the `I32Exit` value.
* Remove the `Trap::new` constructor
This commit removes the ability to create a trap with an arbitrary error
message. The purpose of this commit is to continue the prior trend of
leaning into the `anyhow::Error` type instead of trying to recreate it
with `Trap`. A subsequent simplification to `Trap` after this commit is
that `Trap` will simply be an `enum` of trap codes with no extra
information. This commit is doubly-motivated by the desire to always use
the new `BacktraceContext` type instead of sometimes using that and
sometimes using `Trap`.
Most of the changes here were around updating `Trap::new` calls to
`bail!` calls instead. Tests which assert particular error messages
additionally often needed to use the `:?` formatter instead of the `{}`
formatter because the prior formats the whole `anyhow::Error` and the
latter only formats the top-most error, which now contains the
backtrace.
* Merge `Trap` and `TrapCode`
With prior refactorings there's no more need for `Trap` to be opaque or
otherwise contain a backtrace. This commit parse down `Trap` to simply
an `enum` which was the old `TrapCode`. All various tests and such were
updated to handle this.
The main consequence of this commit is that all errors have a
`BacktraceContext` context attached to them. This unfortunately means
that the backtrace is printed first before the error message or trap
code, but given all the prior simplifications that seems worth it at
this time.
* Rename `BacktraceContext` to `WasmBacktrace`
This feels like a better name given how this has turned out, and
additionally this commit removes having both `WasmBacktrace` and
`BacktraceContext`.
* Soup up documentation for errors and traps
* Fix build of the C API
Co-authored-by: Pat Hickey <pat@moreproductive.org>
* component::Linker::func_wrap: replace IntoComponentFunc with directly accepting a closure
We find that this makes the Linker::func_wrap type signature much easier
to read. The IntoComponentFunc abstraction was adding a lot of weight to
"splat" a set of arguments from a tuple of types into individual
arguments to the closure. Additionally, making the StoreContextMut
argument optional, or the Result<return> optional, wasn't very
worthwhile.
* Fixes for the new style of closure required by component::Linker::func_wrap
* fix fuzzing generator
* Update spec test repo
Our submodule was accidentally reverted to an older commit as part
of #4271 and while it could be updated to as it was before I went ahead
and updated it to `main`.
* Update ignore directives and test multi-memory
* Update riscv ignores
* Leverage Cargo's workspace inheritance feature
This commit is an attempt to reduce the complexity of the Cargo
manifests in this repository with Cargo's workspace-inheritance feature
becoming stable in Rust 1.64.0. This feature allows specifying fields in
the root workspace `Cargo.toml` which are then reused throughout the
workspace. For example this PR shares definitions such as:
* All of the Wasmtime-family of crates now use `version.workspace =
true` to have a single location which defines the version number.
* All crates use `edition.workspace = true` to have one default edition
for the entire workspace.
* Common dependencies are listed in `[workspace.dependencies]` to avoid
typing the same version number in a lot of different places (e.g. the
`wasmparser = "0.89.0"` is now in just one spot.
Currently the workspace-inheritance feature doesn't allow having two
different versions to inherit, so all of the Cranelift-family of crates
still manually specify their version. The inter-crate dependencies,
however, are shared amongst the root workspace.
This feature can be seen as a method of "preprocessing" of sorts for
Cargo manifests. This will help us develop Wasmtime but shouldn't have
any actual impact on the published artifacts -- everything's dependency
lists are still the same.
* Fix wasi-crypto tests
This commit replaces #4869 and represents the actual version bump that
should have happened had I remembered to bump the in-tree version of
Wasmtime to 1.0.0 prior to the branch-cut date. Alas!
* Upgrade wasm-tools crates, namely the component model
This commit pulls in the latest versions of all of the `wasm-tools`
family of crates. There were two major changes that happened in
`wasm-tools` in the meantime:
* bytecodealliance/wasm-tools#697 - this commit introduced a new API for
more efficiently reading binary operators from a wasm binary. The old
`Operator`-based reading was left in place, however, and continues to
be what Wasmtime uses. I hope to update Wasmtime in a future PR to use
this new API, but for now the biggest change is...
* bytecodealliance/wasm-tools#703 - this commit was a major update to
the component model AST. This commit almost entirely deals with the
fallout of this change.
The changes made to the component model were:
1. The `unit` type no longer exists. This was generally a simple change
where the `Unit` case in a few different locations were all removed.
2. The `expected` type was renamed to `result`. This similarly was
relatively lightweight and mostly just a renaming on the surface. I
took this opportunity to rename `val::Result` to `val::ResultVal` and
`types::Result` to `types::ResultType` to avoid clashing with the
standard library types. The `Option`-based types were handled with
this as well.
3. The payload type of `variant` and `result` types are now optional.
This affected many locations that calculate flat type
representations, ABI information, etc. The `#[derive(ComponentType)]`
macro now specifically handles Rust-defined `enum` types which have
no payload to the equivalent in the component model.
4. Functions can now return multiple parameters. This changed the
signature of invoking component functions because the return value is
now bound by `ComponentNamedList` (renamed from `ComponentParams`).
This had a large effect in the tests, fuzz test case generation, etc.
5. Function types with 2-or-more parameters/results must uniquely name
all parameters/results. This mostly affected the text format used
throughout the tests.
I haven't added specifically new tests for multi-return but I changed a
number of tests to use it. Additionally I've updated the fuzzers to all
exercise multi-return as well so I think we should get some good
coverage with that.
* Update version numbers
* Use crates.io
* Add a dataflow-based representation of components
This commit updates the inlining phase of compiling a component to
creating a dataflow-based representation of a component instead of
creating a final `Component` with a linear list of initializers. This
dataflow graph is then linearized in a final step to create the actual
final `Component`.
The motivation for this commit stems primarily from my work implementing
strings in fused adapters. In doing this my plan is to defer most
low-level transcoding to the host itself rather than implementing that
in the core wasm adapter modules. This means that small
cranelift-generated trampolines will be used for adapter modules to call
which then call "transcoding libcalls". The cranelift-generated
trampolines will get raw pointers into linear memory and pass those to
the libcall which core wasm doesn't have access to when passing
arguments to an import.
Implementing this with the previous representation of a `Component` was
becoming too tricky to bear. The initialization of a transcoder needed
to happen at just the right time: before the adapter module which needed
it was instantiated but after the linear memories referenced had been
extracted into the `VMComponentContext`. The difficulty here is further
compounded by the current adapter module injection pass already being
quite complicated. Adapter modules are already renumbering the index
space of runtime instances and shuffling items around in the
`GlobalInitializer` list. Perhaps the worst part of this was that
memories could already be referenced by host function imports or exports
to the host, and if adapters referenced the same memory it shouldn't be
referenced twice in the component. This meant that `ExtractMemory`
initializers ideally needed to be shuffled around in the initializer
list to happen as early as possible instead of wherever they happened to
show up during translation.
Overall I did my best to implement the transcoders but everything always
came up short. I have decided to throw my hands up in the air and try a
completely different approach to this, namely the dataflow-based
representation in this commit. This makes it much easier to edit the
component after initial translation for injection of adapters, injection
of transcoders, adding dependencies on possibly-already-existing items,
etc. The adapter module partitioning pass in this commit was greatly
simplified to something which I believe is functionally equivalent but
is probably an order of magnitude easier to understand.
The biggest downside of this representation I believe is having a
duplicate representation of a component. The `component::info` was
largely duplicated into the `component::dfg` module in this commit.
Personally though I think this is a more appropriate tradeoff than
before because it's very easy to reason about "convert representation A
to B" code whereas it was very difficult to reason about shuffling
around `GlobalInitializer` items in optimal fashions. This may also have
a cost at compile-time in terms of shuffling data around, but my hope is
that we have lots of other low-hanging fruit to optimize if it ever
comes to that which allows keeping this easier-to-understand
representation.
Finally, to reiterate, the final representation of components is not
changed by this PR. To the runtime internals everything is still the
same.
* Fix compile of factc
This commit builds on bytecodealliance/wasm-tools#690 to add support to
testing of the component model to execute functions when running
`*.wast` files. This support is all built on #4442 as functions are
invoked through a "dynamic" API. Right now the testing and integration
is fairly crude but I'm hoping that we can try to improve it over time
as necessary. For now this should provide a hopefully more convenient
syntax for unit tests and the like.
* Bump versions of wasm-tools crates
Note that this leaves new features in the component model, outer type
aliases for core wasm types, unimplemented for now.
* Move to crates.io-based versions of tools
This commit adds support to Wasmtime for components which themselves
export instances. The support here adds new APIs for how instance
exports are accessed in the embedding API. For now this is mostly just a
first-pass where the API is somewhat confusing and has a lot of
lifetimes. I'm hoping that over time we can figure out how to simplify
this but for now it should at least be expressive enough for exploring
the exports of an instance.
* Add support for nested components
This commit is an implementation of a number of features of the
component model including:
* Defining nested components
* Outer aliases to components and modules
* Instantiating nested components
The implementation here is intended to be a foundational pillar of
Wasmtime's component model support since recursion and nested components
are the bread-and-butter of the component model. At a high level the
intention for the component model implementation in Wasmtime has long
been that the recursive nature of components is "erased" at compile time
to something that's more optimized and efficient to process. This commit
ended up exemplifying this quite well where the vast majority of the
internal changes here are in the "compilation" phase of a component
rather than the runtime instantiation phase. The support in the
`wasmtime` crate, the runtime instantiation support, only had minor
updates here while the internals of translation have seen heavy updates.
The `translate` module was greatly refactored here in this commit.
Previously it would, as a component is parsed, create a final
`Component` to hand off to trampoline compilation and get persisted at
runtime. Instead now it's a thin layer over `wasmparser` which simply
records a list of `LocalInitializer` entries for how to instantiate the
component and its index spaces are built. This internal representation
of the instantiation of a component is pretty close to the binary format
intentionally.
Instead of performing dataflow legwork the `translate` phase of a
component is now responsible for two primary tasks:
1. All components and modules are discovered within a component. They're
assigned `Static{Component,Module}Index` depending on where they're
found and a `{Module,}Translation` is prepared for each one. This
"flattens" the recursive structure of the binary into an indexed list
processable later.
2. The lexical scope of components is managed here to implement outer
module and component aliases. This is a significant design
implementation because when closing over an outer component or module
that item may actually be imported or something like the result of a
previous instantiation. This means that the capture of
modules and components is both a lexical concern as well as a runtime
concern. The handling of the "runtime" bits are handled in the next
phase of compilation.
The next and currently final phase of compilation is a new pass where
much of the historical code in `translate.rs` has been moved to (but
heavily refactored). The goal of compilation is to produce one "flat"
list of initializers for a component (as happens prior to this PR) and
to achieve this an "inliner" phase runs which runs through the
instantiation process at compile time to produce a list of initializers.
This `inline` module is the main addition as part of this PR and is now
the workhorse for dataflow analysis and tracking what's actually
referring to what.
During the `inline` phase the local initializers recorded in the
`translate` phase are processed, in sequence, to instantiate a
component. Definitions of items are tracked to correspond to their root
definition which allows seeing across instantiation argument boundaries
and such. Handling "upvars" for component outer aliases is handled in
the `inline` phase as well by creating state for a component whenever a
component is defined as was recorded during the `translate` phase.
Finally this phase is chiefly responsible for doing all string-based
name resolution at compile time that it can. This means that at runtime
no string maps will need to be consulted for item exports and such.
The final result of inlining is a list of "global initializers" which is
a flat list processed during instantiation time. These are almost
identical to the initializers that were processed prior to this PR.
There are certainly still more gaps of the component model to implement
but this should be a major leg up in terms of functionality that
Wasmtime implements. This commit, however leaves behind a "hole" which
is not intended to be filled in at this time, namely importing and
exporting components at the "root" level from and to the host. This is
tracked and explained in more detail as part of #4283.
cc #4185 as this completes a number of items there
* Tweak code to work on stable without warning
* Review comments
This commit updates the wasm-tools family of crates, notably pulling in
the refactorings and updates from bytecodealliance/wasm-tools#621 for
the latest iteration of the component model. This commit additionally
updates all support for the component model for these changes, notably:
* Many bits and pieces of type information was refactored. Many
`FooTypeIndex` namings are now `TypeFooIndex`. Additionally there is
now `TypeIndex` as well as `ComponentTypeIndex` for the two type index
spaces in a component.
* A number of new sections are now processed to handle the core and
component variants.
* Internal maps were split such as the `funcs` map into
`component_funcs` and `funcs` (same for `instances`).
* Canonical options are now processed individually instead of one bulk
`into` definition.
Overall this was not a major update to the internals of handling the
component model in Wasmtime. Instead this was mostly a surface-level
refactoring to make sure that everything lines up with the new binary
format for components.
* All text syntax used in tests was updated to the new syntax.
* Implement module imports into components
As a step towards implementing function imports into a component this
commit implements importing modules into a component. This fills out
missing pieces of functionality such as exporting modules as well. The
previous translation code had initial support for translating imported
modules but some of the AST type information was restructured with
feedback from this implementation, namely splitting the
`InstantiateModule` initializer into separate upvar/import variants to
clarify that the item orderings for imports are resolved differently at
runtime.
Much of this commit is also adding infrastructure for any imports at all
into a component. For example a `Linker` type (analagous to
`wasmtime::Linker`) was added here as well. For now this type is quite
limited due to the inability to define host functions (it can only work
with instances and instances-of-modules) but it's enough to start
writing `*.wast` tests which exercise lots of module-related functionality.
* Fix a warning
* Initial skeleton of some component model processing
This commit is the first of what will likely be many to implement the
component model proposal in Wasmtime. This will be structured as a
series of incremental commits, most of which haven't been written yet.
My hope is to make this incremental and over time to make this easier to
review and easier to test each step in isolation.
Here much of the skeleton of how components are going to work in
Wasmtime is sketched out. This is not a complete implementation of the
component model so it's not all that useful yet, but some things you can
do are:
* Process the type section into a representation amenable for working
with in Wasmtime.
* Process the module section and register core wasm modules.
* Process the instance section for core wasm modules.
* Process core wasm module imports.
* Process core wasm instance aliasing.
* Ability to compile a component with core wasm embedded.
* Ability to instantiate a component with no imports.
* Ability to get functions from this component.
This is already starting to diverge from the previous module linking
representation where a `Component` will try to avoid unnecessary
metadata about the component and instead internally only have the bare
minimum necessary to instantiate the module. My hope is we can avoid
constructing most of the index spaces during instantiation only for it
to all ge thrown away. Additionally I'm predicting that we'll need to
see through processing where possible to know how to generate adapters
and where they are fused.
At this time you can't actually call a component's functions, and that's
the next PR that I would like to make.
* Add tests for the component model support
This commit uses the recently updated wasm-tools crates to add tests for
the component model added in the previous commit. This involved updating
the `wasmtime-wast` crate for component-model changes. Currently the
component support there is quite primitive, but enough to at least
instantiate components and verify the internals of Wasmtime are all
working correctly. Additionally some simple tests for the embedding API
have also been added.
* Update the wasm-tools family of crates
This commit updates these crates as used by Wasmtime for the recently
published versions to pull in changes necessary to support the component
model. I've split this out from #4005 to make it clear what's impacted
here and #4005 can simply rebase on top of this to pick up the necessary
changes.
* More test fixes
* Update wasm-tools crates
This commit updates the wasm-tools family of crates as used in Wasmtime.
Notably this brings in the update which removes module linking support
as well as a number of internal refactorings around names and such
within wasmparser itself. This updates all of the wasm translation
support which binds to wasmparser as appropriate.
Other crates all had API-compatible changes for at least what Wasmtime
used so no further changes were necessary beyond updating version
requirements.
* Update a test expectation
* Upgrade all crates to the Rust 2021 edition
I've personally started using the new format strings for things like
`panic!("some message {foo}")` or similar and have been upgrading crates
on a case-by-case basis, but I think it probably makes more sense to go
ahead and blanket upgrade everything so 2021 features are always
available.
* Fix compile of the C API
* Fix a warning
* Fix another warning
* Bump to 0.36.0
* Add a two-week delay to Wasmtime's release process
This commit is a proposal to update Wasmtime's release process with a
two-week delay from branching a release until it's actually officially
released. We've had two issues lately that came up which led to this proposal:
* In #3915 it was realized that changes just before the 0.35.0 release
weren't enough for an embedding use case, but the PR didn't meet the
expectations for a full patch release.
* At Fastly we were about to start rolling out a new version of Wasmtime
when over the weekend the fuzz bug #3951 was found. This led to the
desire internally to have a "must have been fuzzed for this long"
period of time for Wasmtime changes which we felt were better
reflected in the release process itself rather than something about
Fastly's own integration with Wasmtime.
This commit updates the automation for releases to unconditionally
create a `release-X.Y.Z` branch on the 5th of every month. The actual
release from this branch is then performed on the 20th of every month,
roughly two weeks later. This should provide a period of time to ensure
that all changes in a release are fuzzed for at least two weeks and
avoid any further surprises. This should also help with any last-minute
changes made just before a release if they need tweaking since
backporting to a not-yet-released branch is much easier.
Overall there are some new properties about Wasmtime with this proposal
as well:
* The `main` branch will always have a section in `RELEASES.md` which is
listed as "Unreleased" for us to fill out.
* The `main` branch will always be a version ahead of the latest
release. For example it will be bump pre-emptively as part of the
release process on the 5th where if `release-2.0.0` was created then
the `main` branch will have 3.0.0 Wasmtime.
* Dates for major versions are automatically updated in the
`RELEASES.md` notes.
The associated documentation for our release process is updated and the
various scripts should all be updated now as well with this commit.
* Add notes on a security patch
* Clarify security fixes shouldn't be previewed early on CI
* Remove the module linking implementation in Wasmtime
This commit removes the experimental implementation of the module
linking WebAssembly proposal from Wasmtime. The module linking is no
longer intended for core WebAssembly but is instead incorporated into
the component model now at this point. This means that very large parts
of Wasmtime's implementation of module linking are no longer applicable
and would change greatly with an implementation of the component model.
The main purpose of this is to remove Wasmtime's reliance on the support
for module-linking in `wasmparser` and tooling crates. With this
reliance removed we can move over to the `component-model` branch of
`wasmparser` and use the updated support for the component model.
Additionally given the trajectory of the component model proposal the
embedding API of Wasmtime will not look like what it looks like today
for WebAssembly. For example the core wasm `Instance` will not change
and instead a `Component` is likely to be added instead.
Some more rationale for this is in #3941, but the basic idea is that I
feel that it's not going to be viable to develop support for the
component model on a non-`main` branch of Wasmtime. Additionaly I don't
think it's viable, for the same reasons as `wasm-tools`, to support the
old module linking proposal and the new component model at the same
time.
This commit takes a moment to not only delete the existing module
linking implementation but some abstractions are also simplified. For
example module serialization is a bit simpler that there's only one
module. Additionally instantiation is much simpler since the only
initializer we have to deal with are imports and nothing else.
Closes#3941
* Fix doc link
* Update comments
This commit removes the Lightbeam backend from Wasmtime as per [RFC 14].
This backend hasn't received maintenance in quite some time, and as [RFC
14] indicates this doesn't meet the threshold for keeping the code
in-tree, so this commit removes it.
A fast "baseline" compiler may still be added in the future. The
addition of such a backend should be in line with [RFC 14], though, with
the principles we now have for stable releases of Wasmtime. I'll close
out Lightbeam-related issues once this is merged.
[RFC 14]: https://github.com/bytecodealliance/rfcs/pull/14
* Optimize `Func::call` and its C API
This commit is an alternative to #3298 which achieves effectively the
same goal of optimizing the `Func::call` API as well as its C API
sibling of `wasmtime_func_call`. The strategy taken here is different
than #3298 though where a new API isn't created, rather a small tweak to
an existing API is done. Specifically this commit handles the major
sources of slowness with `Func::call` with:
* Looking up the type of a function, to typecheck the arguments with and
use to guide how the results should be loaded, no longer hits the
rwlock in the `Engine` but instead each `Func` contains its own
`FuncType`. This can be an unnecessary allocation for funcs not used
with `Func::call`, so this is a downside of this implementation
relative to #3298. A mitigating factor, though, is that instance
exports are loaded lazily into the `Store` and in theory not too many
funcs are active in the store as `Func` objects.
* Temporary storage is amortized with a long-lived `Vec` in the `Store`
rather than allocating a new vector on each call. This is basically
the same strategy as #3294 only applied to different types in
different places. Specifically `wasmtime::Store` now retains a
`Vec<u128>` for `Func::call`, and the C API retains a `Vec<Val>` for
calling `Func::call`.
* Finally, an API breaking change is made to `Func::call` and its type
signature (as well as `Func::call_async`). Instead of returning
`Box<[Val]>` as it did before this function now takes a
`results: &mut [Val]` parameter. This allows the caller to manage the
allocation and we can amortize-remove it in `wasmtime_func_call` by
using space after the parameters in the `Vec<Val>` we're passing in.
This change is naturally a breaking change and we'll want to consider
it carefully, but mitigating factors are that most embeddings are
likely using `TypedFunc::call` instead and this signature taking a
mutable slice better aligns with `Func::new` which receives a mutable
slice for the results.
Overall this change, in the benchmark of "call a nop function from the C
API" is not quite as good as #3298. It's still a bit slower, on the
order of 15ns, because there's lots of capacity checks around vectors
and the type checks are slightly less optimized than before. Overall
though this is still significantly better than today because allocations
and the rwlock to acquire the type information are both avoided. I
personally feel that this change is the best to do because it has less
of an API impact than #3298.
* Rebase issues
* Remove unnecessary into_iter/map
Forgotten from a previous refactoring, this variable was already of the
right type!
* Move `wasmtime_jit::Compiler` into `wasmtime`
This `Compiler` struct is mostly a historical artifact at this point and
wasn't necessarily pulling much weight any more. This organization also
doesn't lend itself super well to compiling out `cranelift` when the
`Compiler` here is used for both parallel iteration configuration
settings as well as compilation.
The movement into `wasmtime` is relatively small, with
`Module::build_artifacts` being the main function added here which is a
merging of the previous functions removed from the `wasmtime-jit` crate.
* Add a `cranelift` compile-time feature to `wasmtime`
This commit concludes the saga of refactoring Wasmtime and making
Cranelift an optional dependency by adding a new Cargo feature to the
`wasmtime` crate called `cranelift`, which is enabled by default.
This feature is implemented by having a new cfg for `wasmtime` itself,
`cfg(compiler)`, which is used wherever compilation is necessary. This
bubbles up to disable APIs such as `Module::new`, `Func::new`,
`Engine::precompile_module`, and a number of `Config` methods affecting
compiler configuration. Checks are added to CI that when built in this
mode Wasmtime continues to successfully build. It's hoped that although
this is effectively "sprinkle `#[cfg]` until things compile" this won't
be too too bad to maintain over time since it's also an use case we're
interested in supporting.
With `cranelift` disabled the only way to create a `Module` is with the
`Module::deserialize` method, which requires some form of precompiled
artifact.
Two consequences of this change are:
* `Module::serialize` is also disabled in this mode. The reason for this
is that serialized modules contain ISA/shared flags encoded in them
which were used to produce the compiled code. There's no storage for
this if compilation is disabled. This could probably be re-enabled in
the future if necessary, but it may not end up being all that necessary.
* Deserialized modules are not checked to ensure that their ISA/shared
flags are compatible with the host CPU. This is actually already the
case, though, with normal modules. We'll likely want to fix this in
the future using a shared implementation for both these locations.
Documentation should be updated to indicate that `cranelift` can be
disabled, although it's not really the most prominent documentation
because this is expected to be a somewhat niche use case (albeit
important, just not too common).
* Always enable cranelift for the C API
* Fix doc example builds
* Fix check tests on GitHub Actions
* Implement the memory64 proposal in Wasmtime
This commit implements the WebAssembly [memory64 proposal][proposal] in
both Wasmtime and Cranelift. In terms of work done Cranelift ended up
needing very little work here since most of it was already prepared for
64-bit memories at one point or another. Most of the work in Wasmtime is
largely refactoring, changing a bunch of `u32` values to something else.
A number of internal and public interfaces are changing as a result of
this commit, for example:
* Acessors on `wasmtime::Memory` that work with pages now all return
`u64` unconditionally rather than `u32`. This makes it possible to
accommodate 64-bit memories with this API, but we may also want to
consider `usize` here at some point since the host can't grow past
`usize`-limited pages anyway.
* The `wasmtime::Limits` structure is removed in favor of
minimum/maximum methods on table/memory types.
* Many libcall intrinsics called by jit code now unconditionally take
`u64` arguments instead of `u32`. Return values are `usize`, however,
since the return value, if successful, is always bounded by host
memory while arguments can come from any guest.
* The `heap_addr` clif instruction now takes a 64-bit offset argument
instead of a 32-bit one. It turns out that the legalization of
`heap_addr` already worked with 64-bit offsets, so this change was
fairly trivial to make.
* The runtime implementation of mmap-based linear memories has changed
to largely work in `usize` quantities in its API and in bytes instead
of pages. This simplifies various aspects and reflects that
mmap-memories are always bound by `usize` since that's what the host
is using to address things, and additionally most calculations care
about bytes rather than pages except for the very edge where we're
going to/from wasm.
Overall I've tried to minimize the amount of `as` casts as possible,
using checked `try_from` and checked arithemtic with either error
handling or explicit `unwrap()` calls to tell us about bugs in the
future. Most locations have relatively obvious things to do with various
implications on various hosts, and I think they should all be roughly of
the right shape but time will tell. I mostly relied on the compiler
complaining that various types weren't aligned to figure out
type-casting, and I manually audited some of the more obvious locations.
I suspect we have a number of hidden locations that will panic on 32-bit
hosts if 64-bit modules try to run there, but otherwise I think we
should be generally ok (famous last words). In any case I wouldn't want
to enable this by default naturally until we've fuzzed it for some time.
In terms of the actual underlying implementation, no one should expect
memory64 to be all that fast. Right now it's implemented with
"dynamic" heaps which have a few consequences:
* All memory accesses are bounds-checked. I'm not sure how aggressively
Cranelift tries to optimize out bounds checks, but I suspect not a ton
since we haven't stressed this much historically.
* Heaps are always precisely sized. This means that every call to
`memory.grow` will incur a `memcpy` of memory from the old heap to the
new. We probably want to at least look into `mremap` on Linux and
otherwise try to implement schemes where dynamic heaps have some
reserved pages to grow into to help amortize the cost of
`memory.grow`.
The memory64 spec test suite is scheduled to now run on CI, but as with
all the other spec test suites it's really not all that comprehensive.
I've tried adding more tests for basic things as I've had to implement
guards for them, but I wouldn't really consider the testing adequate
from just this PR itself. I did try to take care in one test to actually
allocate a 4gb+ heap and then avoid running that in the pooling
allocator or in emulation because otherwise that may fail or take
excessively long.
[proposal]: https://github.com/WebAssembly/memory64/blob/master/proposals/memory64/Overview.md
* Fix some tests
* More test fixes
* Fix wasmtime tests
* Fix doctests
* Revert to 32-bit immediate offsets in `heap_addr`
This commit updates the generation of addresses in wasm code to always
use 32-bit offsets for `heap_addr`, and if the calculated offset is
bigger than 32-bits we emit a manual add with an overflow check.
* Disable memory64 for spectest fuzzing
* Fix wrong offset being added to heap addr
* More comments!
* Clarify bytes/pages
This commit updates the output of failed expectations in the `wast`
crate to fold in the check-is-the-value-the-same with the
generate-a-nice-message. Additionally this tries to make sure that
everything is aligned in the output to make it a bit more easily
readable. Vectors should notably be improved where lane differences can
be compared vertically in the case of integers and printed out
specifically in the case of floats.
* Bump the wasm-tools crates
Pulls in some updates here and there, mostly for updating crates to the
latest version to prepare for later memory64 work.
* Update lightbeam
* Start a high-level architecture document for Wasmtime
This commit cleands up some existing documentation by removing a number
of "noop README files" and starting a high-level overview of the
architecture of Wasmtime. I've placed this documentation under the
contributing section of the book since it seems most useful for possible
contributors.
I've surely left some things out in this pass, and am happy to add more!
* Review comments
* More rewording
* typos
* Update wasm-tools crates
This brings in recent updates, notably including more improvements to
wasm-smith which will hopefully help exercise non-trapping wasm more.
* Fix some wat
* wasmtime_runtime: move ResourceLimiter defaults into this crate
In preparation of changing wasmtime::ResourceLimiter to be a re-export
of this definition, because translating between two traits was causing
problems elsewhere.
* wasmtime: make ResourceLimiter a re-export of wasmtime_runtime::ResourceLimiter
* refactor Store internals to support ResourceLimiter as part of store's data
* add hooks for entering and exiting native code to Store
* wasmtime-wast, fuzz: changes to adapt ResourceLimiter API
* fix tests
* wrap calls into wasm with entering/exiting exit hooks as well
* the most trivial test found a bug, lets write some more
* store: mark some methods as #[inline] on Store, StoreInner, StoreInnerMost
Co-authored-By: Alex Crichton <alex@alexcrichton.com>
* improve tests for the entering/exiting native hooks
Co-authored-by: Alex Crichton <alex@alexcrichton.com>
