Several of these badges were out of date, with some crates in wide production
use marked as "experimental". Insted of trying to keep them up to date, just
remove them, since they are [no longer displayed on crates.io].
[no longer displayed on crates.io]: https://doc.rust-lang.org/cargo/reference/manifest.html#the-badges-section
* Remove ModuleCompiledFunction
The same information can be retrieved using
ctx.compiled_code().unwrap().code_info().total_size
In addition for Module implementations that don't immediately compile the
given function there is no correct value that can be returned.
* Don't give anonymous functions and data objects an internal name
This internal name can conflict if a module is serialized and then
deserialized into another module. It also wasn't used by any of the
Module implementations anyway.
* Allow serializing all cranelift-module data structures
This allows a Module implementation to serialize it's internal state and
deserialize it in another compilation session. For example to implement
LTO or to load the module into cranelift-interpreter.
* Use expect
* Remove the DataContext wrapper around DataDescription
It doesn't have much of a purpose while making it harder to for example
rewrite the function and data object declarations within it as is
necessary for deserializing a serialized module.
* Derive Debug for DataDescription
* Implement TLS on Aarch64 Mach-O
* Add aarch64 macho TLS filetest
* Address review comments
- `Aarch64` instead of `AArch64` in comments
- Remove unnecessary guard in tls_value lowering
- Remove unnecessary regalloc metadata in emission
* Use x1 as temporary register in emission
- Instead of passing in a temporary register to use when emitting
the TLS code, just use `x1`, as it's already in the clobber set.
This also keeps the size of `aarch64::inst::Inst` at 32 bytes.
- Update filetest accordingly
* Update aarch64 mach-o TLS filetest
This changes the default section type to be `ReadOnlyDataWithRel` instead of `Data`.
On COFF types the CRT initializers do not run unless their section is read only.
The new SectionKind makes these sections read only for COFF and MachO, but leaves it as Writable as required by ELF.
* cranelift: Add `adrp` encoding to AArch64 backend
* cranelift: Support GOT Symbol References in AArch64
* cranelift: Add MachO GOT relocations
* cranelift: Do not mark the GOT PageOffset12 MachO relocation as relative
* Fix some warnings on nightly Rust
Cargo is warning about the usage of workspace dependencies where the
workspace declaration does not mention `default-features` but the
dependency mentions `default-features`, so this explicitly turns off
default features for `cranelift-codegen` at the workspace level and
removes the explicit `default-features = false` at the manifest levels.
* Explicitly enable default feature in wasmtime
* Enable another feature
* add clif-util compile option to output object file
* switch from a box to a borrow
* update objectmodule tests to use borrowed isa
* put targetisa into an arc
* Leverage Cargo's workspace inheritance feature
This commit is an attempt to reduce the complexity of the Cargo
manifests in this repository with Cargo's workspace-inheritance feature
becoming stable in Rust 1.64.0. This feature allows specifying fields in
the root workspace `Cargo.toml` which are then reused throughout the
workspace. For example this PR shares definitions such as:
* All of the Wasmtime-family of crates now use `version.workspace =
true` to have a single location which defines the version number.
* All crates use `edition.workspace = true` to have one default edition
for the entire workspace.
* Common dependencies are listed in `[workspace.dependencies]` to avoid
typing the same version number in a lot of different places (e.g. the
`wasmparser = "0.89.0"` is now in just one spot.
Currently the workspace-inheritance feature doesn't allow having two
different versions to inherit, so all of the Cranelift-family of crates
still manually specify their version. The inter-crate dependencies,
however, are shared amongst the root workspace.
This feature can be seen as a method of "preprocessing" of sorts for
Cargo manifests. This will help us develop Wasmtime but shouldn't have
any actual impact on the published artifacts -- everything's dependency
lists are still the same.
* Fix wasi-crypto tests
Removes the function_alignment field from ObjectBuilder and ObjectModule. Alignment information is now provided either by the Module trait for minimum function alignment requirements, or on FunctionInfo for fucntion specific alignment requirements.
This commit replaces #4869 and represents the actual version bump that
should have happened had I remembered to bump the in-tree version of
Wasmtime to 1.0.0 prior to the branch-cut date. Alas!
Add a function_alignment function to the TargetIsa trait, and use it to align functions when generating objects. Additionally, collect the maximum alignment required for pc-relative constants in functions and pass that value out. Use the max of these two values when padding functions for alignment.
This fixes a bug on x86_64 where rip-relative loads to sse registers could cause a segfault, as functions weren't always guaranteed to be aligned to 16-byte addresses.
Fixes#4812
This fixes two problems: minimum symbol alignment for the LARL
instruction, and alignment requirements for LRL/LGRL etc.
The first problem is that the LARL instruction used to load a
symbol address (PC relative) requires that the target symbol
is at least 2-byte aligned. This is always guaranteed for code
symbols (all instructions must be 2-aligned anyway), but not
necessarily for data symbols.
Other s390x compilers fix this problem by ensuring that all
global symbols are always emitted with a minimum 2-byte
alignment. This patch introduces an equivalent mechanism
for cranelift:
- Add a symbol_alignment routine to TargetIsa, similar to the
existing code_section_alignment routine.
- Respect symbol_alignment as minimum alignment for all symbols
emitted in the object backend (code and data).
The second problem is that PC-relative instructions that
directly *access* data (like LRL/LGRL, STRL/STGRL etc.)
not only have the 2-byte requirement like LARL, but actually
require that their memory operand is *naturally* aligned
(i.e. alignment is at least the size of the access).
This property (natural alignment for memory accesses) is
supposed to be provided by the "aligned" flag in MemFlags;
however, this is not implemented correctly at the moment.
To fix this, this patch:
- Only emits PC-relative memory access instructions if the
"aligned" flag is set in the associated MemFlags.
- Fixes a bug in emit_small_memory_copy and emit_small_memset
which currently set the aligned flag unconditionally, ignoring
the actual alignment info passed by their caller.
Tested with wasmtime and cg_clif.
This is the implementation of https://github.com/bytecodealliance/wasmtime/issues/4155, using the "inverted API" approach suggested by @cfallin (thanks!) in Cranelift, and trait object to provide a backend for an all-included experience in Wasmtime.
After the suggestion of Chris, `Function` has been split into mostly two parts:
- on the one hand, `FunctionStencil` contains all the fields required during compilation, and that act as a compilation cache key: if two function stencils are the same, then the result of their compilation (`CompiledCodeBase<Stencil>`) will be the same. This makes caching trivial, as the only thing to cache is the `FunctionStencil`.
- on the other hand, `FunctionParameters` contain the... function parameters that are required to finalize the result of compilation into a `CompiledCode` (aka `CompiledCodeBase<Final>`) with proper final relocations etc., by applying fixups and so on.
Most changes are here to accomodate those requirements, in particular that `FunctionStencil` should be `Hash`able to be used as a key in the cache:
- most source locations are now relative to a base source location in the function, and as such they're encoded as `RelSourceLoc` in the `FunctionStencil`. This required changes so that there's no need to explicitly mark a `SourceLoc` as the base source location, it's automatically detected instead the first time a non-default `SourceLoc` is set.
- user-defined external names in the `FunctionStencil` (aka before this patch `ExternalName::User { namespace, index }`) are now references into an external table of `UserExternalNameRef -> UserExternalName`, present in the `FunctionParameters`, and must be explicitly declared using `Function::declare_imported_user_function`.
- some refactorings have been made for function names:
- `ExternalName` was used as the type for a `Function`'s name; while it thus allowed `ExternalName::Libcall` in this place, this would have been quite confusing to use it there. Instead, a new enum `UserFuncName` is introduced for this name, that's either a user-defined function name (the above `UserExternalName`) or a test case name.
- The future of `ExternalName` is likely to become a full reference into the `FunctionParameters`'s mapping, instead of being "either a handle for user-defined external names, or the thing itself for other variants". I'm running out of time to do this, and this is not trivial as it implies touching ISLE which I'm less familiar with.
The cache computes a sha256 hash of the `FunctionStencil`, and uses this as the cache key. No equality check (using `PartialEq`) is performed in addition to the hash being the same, as we hope that this is sufficient data to avoid collisions.
A basic fuzz target has been introduced that tries to do the bare minimum:
- check that a function successfully compiled and cached will be also successfully reloaded from the cache, and returns the exact same function.
- check that a trivial modification in the external mapping of `UserExternalNameRef -> UserExternalName` hits the cache, and that other modifications don't hit the cache.
- This last check is less efficient and less likely to happen, so probably should be rethought a bit.
Thanks to both @alexcrichton and @cfallin for your very useful feedback on Zulip.
Some numbers show that for a large wasm module we're using internally, this is a 20% compile-time speedup, because so many `FunctionStencil`s are the same, even within a single module. For a group of modules that have a lot of code in common, we get hit rates up to 70% when they're used together. When a single function changes in a wasm module, every other function is reloaded; that's still slower than I expect (between 10% and 50% of the overall compile time), so there's likely room for improvement.
Fixes#4155.
This enables the object backend for s390x, in particular the
processing of all required relocations.
This uncovered a bug: we need to use PLT relocations for the
target of calls, which we currently do not. Fixed by adding
a new S390xPLTRel32Dbl reloc type and using it where needed.
Implement the tls_value for s390 in the ELF general-dynamic mode.
Notable differences to the x86_64 implementation are:
- We use a __tls_get_offset libcall instead of __tls_get_addr.
- The current thread pointer (stored in a pair of access registers)
needs to be added to the result of __tls_get_offset.
- __tls_get_offset has a variant ABI that requires the address of
the GOT (global offset table) is passed in %r12.
This means we need a new libcall entries for __tls_get_offset.
In addition, we also need a way to access _GLOBAL_OFFSET_TABLE_.
The latter is a "magic" symbol with a well-known name defined
by the ABI and recognized by the linker. This patch introduces
a new ExternalName::KnownSymbol variant to support such names
(originally due to @afonso360).
We also need to emit a relocation on a symbol placed in a
constant pool, as well as an extra relocation on the call
to __tls_get_offset required for TLS linker optimization.
Needed by the cg_clif frontend.
* Move `emit_to_memory` to `MachCompileResult`
This small refactoring makes it clearer to me that emitting to memory
doesn't require anything else from the compilation `Context`. While it's
a trivial change, it's a small public API change that shouldn't cause
too much trouble, and doesn't seem RFC-worthy. Happy to hear different
opinions about this, though!
* hide the MachCompileResult behind a method
* Add a `CompileError` wrapper type that references a `Function`
* Rename MachCompileResult to CompiledCode
* Additionally remove the last unsafe API in cranelift-codegen
Rust 1.61 changed the way `Debug` output looks for strings with null
bytes in them, which broke some expected-panic error message matches.
This makes the expectations more generic while still capturing the
important part ("has a null byte").
A new version of rustc was released this morning and we have a few small
breakages on our CI which need fixing:
* A new warning was coming out of the c-api crate about an unneeded
`unsafe` block.
* The panic message of a task in `cranelift-object` needed updating
since the standard library changed how it formats strings with the nul
byte.
* Run a `cargo update` over our dependencies
This'll notably fix a `cargo audit` error where we have a pinned version
of the `regex` crate which has a CVE assigned to it.
* Update to `object` and `hashbrown` crates
Prune some duplicate versions showing up from the previous `cargo update`
* Upgrade all crates to the Rust 2021 edition
I've personally started using the new format strings for things like
`panic!("some message {foo}")` or similar and have been upgrading crates
on a case-by-case basis, but I think it probably makes more sense to go
ahead and blanket upgrade everything so 2021 features are always
available.
* Fix compile of the C API
* Fix a warning
* Fix another warning
* Bump to 0.36.0
* Add a two-week delay to Wasmtime's release process
This commit is a proposal to update Wasmtime's release process with a
two-week delay from branching a release until it's actually officially
released. We've had two issues lately that came up which led to this proposal:
* In #3915 it was realized that changes just before the 0.35.0 release
weren't enough for an embedding use case, but the PR didn't meet the
expectations for a full patch release.
* At Fastly we were about to start rolling out a new version of Wasmtime
when over the weekend the fuzz bug #3951 was found. This led to the
desire internally to have a "must have been fuzzed for this long"
period of time for Wasmtime changes which we felt were better
reflected in the release process itself rather than something about
Fastly's own integration with Wasmtime.
This commit updates the automation for releases to unconditionally
create a `release-X.Y.Z` branch on the 5th of every month. The actual
release from this branch is then performed on the 20th of every month,
roughly two weeks later. This should provide a period of time to ensure
that all changes in a release are fuzzed for at least two weeks and
avoid any further surprises. This should also help with any last-minute
changes made just before a release if they need tweaking since
backporting to a not-yet-released branch is much easier.
Overall there are some new properties about Wasmtime with this proposal
as well:
* The `main` branch will always have a section in `RELEASES.md` which is
listed as "Unreleased" for us to fill out.
* The `main` branch will always be a version ahead of the latest
release. For example it will be bump pre-emptively as part of the
release process on the 5th where if `release-2.0.0` was created then
the `main` branch will have 3.0.0 Wasmtime.
* Dates for major versions are automatically updated in the
`RELEASES.md` notes.
The associated documentation for our release process is updated and the
various scripts should all be updated now as well with this commit.
* Add notes on a security patch
* Clarify security fixes shouldn't be previewed early on CI
Addresses #3809: when we are asked to create a Cranelift backend with
shared flags that indicate support for SIMD, we should check that the
ISA level needed for our SIMD lowerings is present.
